Daily Papers

Agentic memory is becoming essential for long-horizon AI agents, yet many existing systems rely on autoregressive LLMs to control how memories are organized, retrieved, and used, placing expensive generation on the critical path of memory operations. We introduce \method, a new agentic memory architecture inspired by System-One/System-Two cognition. System One captures fast, lightweight decision-making, whereas System Two performs slower, deliberative reasoning. Jev-Mem brings this division of labor to agentic memory through a dedicated System-One control plane, a structured multi-relational memory plane, and a System-Two reasoning plane. The System-One controller governs memory typing and relational organization during construction, and dynamically performs query routing, retrieval-budget allocation, graph traversal, candidate scoring, and adaptive stopping during retrieval. System Two is invoked only for complex reasoning and answer synthesis. This design improves both memory effectiveness and system efficiency: on LoCoMo Jev-Mem achieves an overall LLM-as-a-Judge score of 0.777, an 11.0\% relative improvement over the strongest baseline, while reducing memory construction time to 158\,s, a 6.6times speedup over the fastest competing memory system, and lowering average query latency to 0.93\,s, a 36.7\% reduction.

Autonomous research agents must acquire and reason over evidence within a limited budget. Yet relevant sources can remain uninspected or unused, leaving a gap between retrieval coverage and the evidence that informs research. The challenge is to align fast local judgments with changing evidence needs and feed their findings back into research decisions. We introduce JevGPT, a dual-system architecture for autonomous research that couples fast evidence processing with deliberative research planning. System Two sets evidence objectives and integrates findings, while System One locates support, assesses relevance, and guides further inspection. Independent source judgments run in parallel; selected original passages inform the next research step. Experiments on fixed-corpus question answering and document ranking show that JevGPT achieves leading task performance, with faster completion and lower cost than comparably effective research agents. Evidence analysis shows broader source inspection and greater coverage of supporting documents in the research loop, highlighting efficient evidence processing as a route to more capable autonomous research.

General-purpose robots capable of performing diverse tasks require synergistic reasoning and acting capabilities. However, recent dual-system approaches, which separate high-level reasoning from low-level acting, often suffer from challenges such as limited mutual understanding of capabilities between systems and latency issues. This paper introduces OneTwoVLA, a single unified vision-language-action model that can perform both acting (System One) and reasoning (System Two). Crucially, OneTwoVLA adaptively switches between two modes: explicitly reasoning at critical moments during task execution, and generating actions based on the most recent reasoning at other times. To further unlock OneTwoVLA's reasoning and generalization capabilities, we design a scalable pipeline for synthesizing embodied reasoning-centric vision-language data, used for co-training with robot data. We validate OneTwoVLA's effectiveness through extensive experiments, highlighting its superior performance across four key capabilities: long-horizon task planning, error detection and recovery, natural human-robot interaction, and generalizable visual grounding, enabling the model to perform long-horizon, highly dexterous manipulation tasks such as making hotpot or mixing cocktails.

Long-horizon video-audio reasoning and fine-grained pixel understanding impose conflicting requirements on omnimodal models: dense temporal coverage demands many low-resolution frames, whereas precise grounding calls for high-resolution inputs. We tackle this trade-off with a two-system architecture: a Global Reasoning System selects informative keyframes and rewrites the task at low spatial cost, while a Detail Understanding System performs pixel-level grounding on the selected high-resolution snippets. Because ``optimal'' keyframe selection and reformulation are ambiguous and hard to supervise, we formulate them as a reinforcement learning (RL) problem and present Omni-R1, an end-to-end RL framework built on Group Relative Policy Optimization. Omni-R1 trains the Global Reasoning System through hierarchical rewards obtained via online collaboration with the Detail Understanding System, requiring only one epoch of RL on small task splits. Experiments on two challenging benchmarks, namely Referring Audio-Visual Segmentation (RefAVS) and Reasoning Video Object Segmentation (REVOS), show that Omni-R1 not only surpasses strong supervised baselines but also outperforms specialized state-of-the-art models, while substantially improving out-of-domain generalization and mitigating multimodal hallucination. Our results demonstrate the first successful application of RL to large-scale omnimodal reasoning and highlight a scalable path toward universally foundation models.

Interests in the automatic generation of cooking recipes have been growing steadily over the past few years thanks to a large amount of online cooking recipes. We present RecipeGPT, a novel online recipe generation and evaluation system. The system provides two modes of text generations: (1) instruction generation from given recipe title and ingredients; and (2) ingredient generation from recipe title and cooking instructions. Its back-end text generation module comprises a generative pre-trained language model GPT-2 fine-tuned on a large cooking recipe dataset. Moreover, the recipe evaluation module allows the users to conveniently inspect the quality of the generated recipe contents and store the results for future reference. RecipeGPT can be accessed online at https://recipegpt.org/.

Machine Unlearning (MU) aims to remove target training data from a trained model so that the removed data no longer influences the model's behavior, fulfilling "right to be forgotten" obligations under data privacy laws. Yet, we observe that researchers in this rapidly emerging field face challenges in analyzing and understanding the behavior of different MU methods, especially in terms of three fundamental principles in MU: accuracy, efficiency, and privacy. Consequently, they often rely on aggregate metrics and ad-hoc evaluations, making it difficult to accurately assess the trade-offs between methods. To fill this gap, we introduce a visual analytics system, Unlearning Comparator, designed to facilitate the systematic evaluation of MU methods. Our system supports two important tasks in the evaluation process: model comparison and attack simulation. First, it allows the user to compare the behaviors of two models, such as a model generated by a certain method and a retrained baseline, at class-, instance-, and layer-levels to better understand the changes made after unlearning. Second, our system simulates membership inference attacks (MIAs) to evaluate the privacy of a method, where an attacker attempts to determine whether specific data samples were part of the original training set. We evaluate our system through a case study visually analyzing prominent MU methods and demonstrate that it helps the user not only understand model behaviors but also gain insights that can inform the improvement of MU methods.

In this paper, we describe in detail our system for DCASE 2022 Task4. The system combines two considerably different models: an end-to-end Sound Event Detection Transformer (SEDT) and a frame-wise model, Metric Learning and Focal Loss CNN (MLFL-CNN). The former is an event-wise model which learns event-level representations and predicts sound event categories and boundaries directly, while the latter is based on the widely adopted frame-classification scheme, under which each frame is classified into event categories and event boundaries are obtained by post-processing such as thresholding and smoothing. For SEDT, self-supervised pre-training using unlabeled data is applied, and semi-supervised learning is adopted by using an online teacher, which is updated from the student model using the Exponential Moving Average (EMA) strategy and generates reliable pseudo labels for weakly-labeled and unlabeled data. For the frame-wise model, the ICT-TOSHIBA system of DCASE 2021 Task 4 is used. Experimental results show that the hybrid system considerably outperforms either individual model and achieves psds1 of 0.420 and psds2 of 0.783 on the validation set without external data. The code is available at https://github.com/965694547/Hybrid-system-of-frame-wise-model-and-SEDT.

Existing retrieval-augmented generation (RAG) systems typically use a centralized architecture, causing a high cost of data collection, integration, and management, as well as privacy concerns. There is a great need for a decentralized RAG system that enables foundation models to utilize information directly from data owners who maintain full control over their sources. However, decentralization brings a challenge: the numerous independent data sources vary significantly in reliability, which can diminish retrieval accuracy and response quality. To address this, our decentralized RAG system has a novel reliability scoring mechanism that dynamically evaluates each source based on the quality of responses it contributes to generate and prioritizes high-quality sources during retrieval. To ensure transparency and trust, the scoring process is securely managed through blockchain-based smart contracts, creating verifiable and tamper-proof reliability records without relying on a central authority. We evaluate our decentralized system with two Llama models (3B and 8B) in two simulated environments where six data sources have different levels of reliability. Our system achieves a +10.7\% performance improvement over its centralized counterpart in the real world-like unreliable data environments. Notably, it approaches the upper-bound performance of centralized systems under ideally reliable data environments. The decentralized infrastructure enables secure and trustworthy scoring management, achieving approximately 56\% marginal cost savings through batched update operations. Our code and system are open-sourced at github.com/yining610/Reliable-dRAG.

Web search provides a promising way for people to obtain information and has been extensively studied. With the surgence of deep learning and large-scale pre-training techniques, various neural information retrieval models are proposed and they have demonstrated the power for improving search (especially, the ranking) quality. All these existing search methods follow a common paradigm, i.e. index-retrieve-rerank, where they first build an index of all documents based on document terms (i.e., sparse inverted index) or representation vectors (i.e., dense vector index), then retrieve and rerank retrieved documents based on similarity between the query and documents via ranking models. In this paper, we explore a new paradigm of information retrieval with neither sparse nor dense index but only a model. Specifically, we propose a pre-training model-based IR system called DynamicRetriever. As for this system, the training stage embeds the token-level and document-level information (especially, document identifiers) of the corpus into the model parameters, then the inference stage directly generates document identifiers for a given query. Compared with existing search methods, the model-based IR system has two advantages: i) it parameterizes the traditional static index with a pre-training model, which converts the document semantic mapping into a dynamic and updatable process; ii) with separate document identifiers, it captures both the term-level and document-level information for each document. Extensive experiments conducted on the public search benchmark MS MARCO verify the effectiveness and potential of our proposed new paradigm for information retrieval.

Human reasoning can be understood as a cooperation between the intuitive, associative "System-1" and the deliberative, logical "System-2". For existing System-1-like methods in visual activity understanding, it is crucial to integrate System-2 processing to improve explainability, generalization, and data efficiency. One possible path of activity reasoning is building a symbolic system composed of symbols and rules, where one rule connects multiple symbols, implying human knowledge and reasoning abilities. Previous methods have made progress, but are defective with limited symbols from handcraft and limited rules from visual-based annotations, failing to cover the complex patterns of activities and lacking compositional generalization. To overcome the defects, we propose a new symbolic system with two ideal important properties: broad-coverage symbols and rational rules. Collecting massive human knowledge via manual annotations is expensive to instantiate this symbolic system. Instead, we leverage the recent advancement of LLMs (Large Language Models) as an approximation of the two ideal properties, i.e., Symbols from Large Language Models (Symbol-LLM). Then, given an image, visual contents from the images are extracted and checked as symbols and activity semantics are reasoned out based on rules via fuzzy logic calculation. Our method shows superiority in extensive activity understanding tasks. Code and data are available at https://mvig-rhos.com/symbol_llm.

Natural interaction in digital and physical environments requires continuous perception and timely responses. Spoken dialogue relies on acoustic and linguistic cues, while video interaction also requires grounding the conversation in evolving visual context. We present Realtime-Venus, a proactive full-duplex interaction system with two separately trained 9B models: Realtime-Venus-Omni for audio-visual interaction and Realtime-Venus-Audio for spoken interaction. Each model serves as a complete conversational frontend, integrating continuous perception, conversational control, and native speech generation through a shared causal timeline for user inputs, model outputs, and delegation events. A dual-loop runtime coordinates live interaction with background reasoning and tool execution. Foreground interaction continues while Realtime-Venus-Harness executes tasks asynchronously and returns results for integration into the ongoing dialogue. Both models follow a common post-training recipe combining offline understanding, proactive full-duplex trajectories, and delegation workflows. Among the evaluated online models, Realtime-Venus-Omni achieves the highest scores on six of eight video benchmarks, including StreamingBench (70.2%), OVO-Bench (64.7%), and Daily-Omni (81.3%). Across eight audio understanding and spoken question answering benchmarks, Realtime-Venus-Audio leads the compared models on MMAU (78.0%), MMAU-Pro (63.2%), Llama Questions (83.8%), and Speech CMMLU (67.8%), while matching the best VoiceBench AlpacaEval score of 4.81. On Full-Duplex-Bench v1.5, Realtime-Venus-Audio responds to 75% of user interruptions and achieves continuation rates of 97%, 88%, and 86% under backchannels, other-directed speech, and background speech, respectively, exceeding Gemini 3.1 Live and GPT-4o on all three continuation metrics.

Motivated by the theoretical interest in reconstructing long 3D trajectories of individual birds in large flocks, we developed CoMo, a co-moving camera system of two synchronized high speed cameras coupled with rotational stages, which allow us to dynamically follow the motion of a target flock. With the rotation of the cameras we overcome the limitations of standard static systems that restrict the duration of the collected data to the short interval of time in which targets are in the cameras common field of view, but at the same time we change in time the external parameters of the system, which have then to be calibrated frame-by-frame. We address the calibration of the external parameters measuring the position of the cameras and their three angles of yaw, pitch and roll in the system "home" configuration (rotational stage at an angle equal to 0deg and combining this static information with the time dependent rotation due to the stages. We evaluate the robustness and accuracy of the system by comparing reconstructed and measured 3D distances in what we call 3D tests, which show a relative error of the order of 1%. The novelty of the work presented in this paper is not only on the system itself, but also on the approach we use in the tests, which we show to be a very powerful tool in detecting and fixing calibration inaccuracies and that, for this reason, may be relevant for a broad audience.

Generating music from text descriptions is a user-friendly mode since the text is a relatively easy interface for user engagement. While some approaches utilize texts to control music audio generation, editing musical elements in generated audio is challenging for users. In contrast, symbolic music offers ease of editing, making it more accessible for users to manipulate specific musical elements. In this paper, we propose MuseCoco, which generates symbolic music from text descriptions with musical attributes as the bridge to break down the task into text-to-attribute understanding and attribute-to-music generation stages. MuseCoCo stands for Music Composition Copilot that empowers musicians to generate music directly from given text descriptions, offering a significant improvement in efficiency compared to creating music entirely from scratch. The system has two main advantages: Firstly, it is data efficient. In the attribute-to-music generation stage, the attributes can be directly extracted from music sequences, making the model training self-supervised. In the text-to-attribute understanding stage, the text is synthesized and refined by ChatGPT based on the defined attribute templates. Secondly, the system can achieve precise control with specific attributes in text descriptions and offers multiple control options through attribute-conditioned or text-conditioned approaches. MuseCoco outperforms baseline systems in terms of musicality, controllability, and overall score by at least 1.27, 1.08, and 1.32 respectively. Besides, there is a notable enhancement of about 20% in objective control accuracy. In addition, we have developed a robust large-scale model with 1.2 billion parameters, showcasing exceptional controllability and musicality.

As the artificial intelligence (AI) supply chain grows more complex, AI systems and models are increasingly likely to incorporate externally-sourced ingredients such as datasets and other models. In such cases, determining whether or not an AI system or model complies with the EU AI Act will require gathering compliance-related metadata about both the AI system or model at-large as well as those externally-supplied ingredients. There must then be an analysis that looks across all of this metadata to render a prediction about the compliance of the overall AI system or model. Up until now, this process has not been automated. Thus, it has not been possible to make real-time compliance determinations in scenarios where doing so would be advantageous, such as the iterative workflows of today's AI developers, search and acquisition of AI ingredients on communities like Hugging Face, federated and continuous learning, and more. To address this shortcoming, we introduce a highly automated system for AI Act compliance analysis. This system has two key elements. First is an interlocking set of computational artifacts that capture compliance-related metadata about both: (1) the AI system or model at-large; (2) any constituent ingredients such as datasets and models. Second is an automated analysis algorithm that operates across those computational artifacts to render a run-time prediction about whether or not the overall AI system or model complies with the AI Act. Working together, these elements promise to enhance and accelerate AI Act compliance assessments.

We present Hunyuan3D 2.0, an advanced large-scale 3D synthesis system for generating high-resolution textured 3D assets. This system includes two foundation components: a large-scale shape generation model -- Hunyuan3D-DiT, and a large-scale texture synthesis model -- Hunyuan3D-Paint. The shape generative model, built on a scalable flow-based diffusion transformer, aims to create geometry that properly aligns with a given condition image, laying a solid foundation for downstream applications. The texture synthesis model, benefiting from strong geometric and diffusion priors, produces high-resolution and vibrant texture maps for either generated or hand-crafted meshes. Furthermore, we build Hunyuan3D-Studio -- a versatile, user-friendly production platform that simplifies the re-creation process of 3D assets. It allows both professional and amateur users to manipulate or even animate their meshes efficiently. We systematically evaluate our models, showing that Hunyuan3D 2.0 outperforms previous state-of-the-art models, including the open-source models and closed-source models in geometry details, condition alignment, texture quality, and etc. Hunyuan3D 2.0 is publicly released in order to fill the gaps in the open-source 3D community for large-scale foundation generative models. The code and pre-trained weights of our models are available at: https://github.com/Tencent/Hunyuan3D-2

We propose a new concept, Evolution 6.0, which represents the evolution of robotics driven by Generative AI. When a robot lacks the necessary tools to accomplish a task requested by a human, it autonomously designs the required instruments and learns how to use them to achieve the goal. Evolution 6.0 is an autonomous robotic system powered by Vision-Language Models (VLMs), Vision-Language Action (VLA) models, and Text-to-3D generative models for tool design and task execution. The system comprises two key modules: the Tool Generation Module, which fabricates task-specific tools from visual and textual data, and the Action Generation Module, which converts natural language instructions into robotic actions. It integrates QwenVLM for environmental understanding, OpenVLA for task execution, and Llama-Mesh for 3D tool generation. Evaluation results demonstrate a 90% success rate for tool generation with a 10-second inference time, and action generation achieving 83.5% in physical and visual generalization, 70% in motion generalization, and 37% in semantic generalization. Future improvements will focus on bimanual manipulation, expanded task capabilities, and enhanced environmental interpretation to improve real-world adaptability.

3D AI-generated content (AIGC) is a passionate field that has significantly accelerated the creation of 3D models in gaming, film, and design. Despite the development of several groundbreaking models that have revolutionized 3D generation, the field remains largely accessible only to researchers, developers, and designers due to the complexities involved in collecting, processing, and training 3D models. To address these challenges, we introduce Hunyuan3D 2.1 as a case study in this tutorial. This tutorial offers a comprehensive, step-by-step guide on processing 3D data, training a 3D generative model, and evaluating its performance using Hunyuan3D 2.1, an advanced system for producing high-resolution, textured 3D assets. The system comprises two core components: the Hunyuan3D-DiT for shape generation and the Hunyuan3D-Paint for texture synthesis. We will explore the entire workflow, including data preparation, model architecture, training strategies, evaluation metrics, and deployment. By the conclusion of this tutorial, you will have the knowledge to finetune or develop a robust 3D generative model suitable for applications in gaming, virtual reality, and industrial design.

Large Language Models (LLMs) deployed on mobile devices offer benefits like user privacy and reduced network latency, but introduce a significant security risk: the leakage of proprietary models to end users. To mitigate this risk, we propose a system design for protecting on-device LLMs using Arm Trusted Execution Environment (TEE), TrustZone. Our system addresses two primary challenges: (1) The dilemma between memory efficiency and fast inference (caching model parameters within TEE memory). (2) The lack of efficient and secure Neural Processing Unit (NPU) time-sharing between Rich Execution Environment (REE) and TEE. Our approach incorporates two key innovations. First, we employ pipelined restoration, leveraging the deterministic memory access patterns of LLM inference to prefetch parameters on demand, hiding memory allocation, I/O and decryption latency under computation time. Second, we introduce a co-driver design, creating a minimal data plane NPU driver in the TEE that collaborates with the full-fledged REE driver. This reduces the TEE TCB size and eliminates control plane reinitialization overhead during NPU world switches. We implemented our system on the emerging OpenHarmony OS and the llama.cpp inference framework, and evaluated it with various LLMs on an Arm Rockchip device. Compared to a strawman TEE baseline lacking our optimizations, our system reduces TTFT by up to 90.9% and increases decoding speed by up to 23.2%.

When confronted with complex problems, we tend to think slowly; conversely, for simple questions, we think quickly. Such a two-system thinking mechanism allows us to efficiently allocate cognitive resources, enabling quick decision-making for straightforward issues while reserving deeper analytical thinking for more intricate challenges. However, existing reasoning-oriented visual language models (VLMs), whether trained with explicit chain-of-thought annotations or rule-based RL rewards, mainly pursue lengthy, detailed reasoning chains, which often lead to excessive computational costs. In this work, we propose a simple RL approach, which enables VLMs to automatically switch between fast and slow thinking modes depending on task difficulty. The approach consists of two stages: in the first stage, we label data as either requiring fast thinking or slow thinking based on the model output length, which is inspired by the observation that pre-trained VLMs typically produce answers of varying lengths for different types of questions; in the second stage, we train the model using GRPO along with the thinking mode labels to develop dual-mode thinking. Despite its simplicity, our model, named DualMindVLM, significantly outperforms the base model and achieves performance on par with state-of-the-art visual reasoning models, while maintaining exceptionally high token efficiency.

This paper introduces a novel Deep Researcher architecture designed to generate detailed research reports on complex PhD level topics by addressing the inherent limitations of the Parallel Scaling paradigm. Our system utilizes two key innovations: Sequential Research Plan Refinement via Reflection and a Candidates Crossover algorithm. The sequential refinement process is demonstrated as an efficient method that allows the agent to maintain a centralized Global Research Context, enabling it to look back at current progress, reason about the research plan, and intelligently make changes at runtime. This dynamic adaptation contrasts with parallel approaches, which often suffer from siloed knowledge. The Candidates Crossover algorithm further enhances search efficiency by deploying multiple LLM candidates with varied parameters to explore a larger search space, with their findings synthesized to curate a comprehensive final research response. The process concludes with One Shot Report Generation, ensuring the final document is informed by a unified narrative and high fact density. Powered by the Gemini 2.5 Pro model, our Deep Researcher was evaluated on the DeepResearch Bench, a globally recognized benchmark of 100 doctoral level research tasks. Our architecture achieved an overall score of 46.21, demonstrating superior performance by surpassing leading deep research agents such as Claude Researcher, Nvidia AIQ Research Assistant, Perplexity Research, Kimi Researcher and Grok Deeper Search present on the DeepResearch Bench actively running leaderboard. This performance marginally exceeds our previous work, Static DRA, and reinforces the finding that sequential scaling consistently outperforms the parallel self consistency paradigm.

Heart diseases remain the leading cause of mortality worldwide, implying approximately 18 million deaths according to the WHO. In particular, heart failures (HF) press the healthcare industry to develop systems for their early, rapid, and effective prediction. This work presents an automatic system based on a novel framework which combines Modal Decomposition and Masked Autoencoders (MAE) to extend the application from heart disease classification to the more challenging and specific task of heart failure time prediction, not previously addressed to the best of authors' knowledge. This system comprises two stages. The first one transforms the data from a database of echocardiography video sequences into a large collection of annotated images compatible with the training phase of machine learning-based frameworks and deep learning-based ones. This stage includes the use of the Higher Order Dynamic Mode Decomposition (HODMD) algorithm for both data augmentation and feature extraction. The second stage builds and trains a Vision Transformer (ViT). MAEs based on a combined scheme of self-supervised (SSL) and supervised learning, so far barely explored in the literature about heart failure prediction, are adopted to effectively train the ViT from scratch, even with scarce databases. The designed neural network analyses in real-time images from echocardiography sequences to estimate the time of happening a heart failure. This approach demonstrates to improve prediction accuracy from scarce databases and to be superior to several established ViT and Convolutional Neural Network (CNN) architectures. The source code will be incorporated into the next version release of the ModelFLOWs-app software (https://github.com/modelflows/ModelFLOWs-app).

Hearables are becoming ubiquitous, yet their sound controls remain blunt: users can either enable global noise suppression or focus on a single target sound. Real-world acoustic scenes, however, contain many simultaneous sources that users may want to adjust independently. We introduce Aurchestra, the first system to provide fine-grained, real-time soundscape control on resource-constrained hearables. Our system has two key components: (1) a dynamic interface that surfaces only active sound classes and (2) a real-time, on-device multi-output extraction network that generates separate streams for each selected class, achieving robust performance for upto 5 overlapping target sounds, and letting users mix their environment by customizing per-class volumes, much like an audio engineer mixes tracks. We optimize the model architecture for multiple compute-limited platforms and demonstrate real-time performance on 6 ms streaming audio chunks. Across real-world environments in previously unseen indoor and outdoor scenarios, our system enables expressive per-class sound control and achieves substantial improvements in target-class enhancement and interference suppression. Our results show that the world need not be heard as a single, undifferentiated stream: with Aurchestra, the soundscape becomes truly programmable.

The rapid growth of scientific literature has made it increasingly difficult for researchers to efficiently discover, evaluate, and synthesize relevant work. Recent advances in multi-agent large language models (LLMs) have demonstrated strong potential for understanding user intent and are being trained to utilize various tools. In this paper, we introduce Paper Circle, a multi-agent research discovery and analysis system designed to reduce the effort required to find, assess, organize, and understand academic literature. The system comprises two complementary pipelines: (1) a Discovery Pipeline that integrates offline and online retrieval from multiple sources, multi-criteria scoring, diversity-aware ranking, and structured outputs; and (2) an Analysis Pipeline that transforms individual papers into structured knowledge graphs with typed nodes such as concepts, methods, experiments, and figures, enabling graph-aware question answering and coverage verification. Both pipelines are implemented within a coder LLM-based multi-agent orchestration framework and produce fully reproducible, synchronized outputs including JSON, CSV, BibTeX, Markdown, and HTML at each agent step. This paper describes the system architecture, agent roles, retrieval and scoring methods, knowledge graph schema, and evaluation interfaces that together form the Paper Circle research workflow. We benchmark Paper Circle on both paper retrieval and paper review generation, reporting hit rate, MRR, and Recall at K. Results show consistent improvements with stronger agent models. We have publicly released the website at https://papercircle.vercel.app/ and the code at https://github.com/MAXNORM8650/papercircle.

We present Ov3R, a novel framework for open-vocabulary semantic 3D reconstruction from RGB video streams, designed to advance Spatial AI. The system features two key components: CLIP3R, a CLIP-informed 3D reconstruction module that predicts dense point maps from overlapping clips while embedding object-level semantics; and 2D-3D OVS, a 2D-3D open-vocabulary semantic module that lifts 2D features into 3D by learning fused descriptors integrating spatial, geometric, and semantic cues. Unlike prior methods, Ov3R incorporates CLIP semantics directly into the reconstruction process, enabling globally consistent geometry and fine-grained semantic alignment. Our framework achieves state-of-the-art performance in both dense 3D reconstruction and open-vocabulary 3D segmentation, marking a step forward toward real-time, semantics-aware Spatial AI.

Complex tasks are increasingly delegated to ensembles of specialized LLM-based agents that reason, communicate, and coordinate actions-both among themselves and through interactions with external tools, APIs, and databases. While persistent memory has been shown to enhance single-agent performance, most approaches assume a monolithic, single-user context-overlooking the benefits and challenges of knowledge transfer across users under dynamic, asymmetric permissions. We introduce Collaborative Memory, a framework for multi-user, multi-agent environments with asymmetric, time-evolving access controls encoded as bipartite graphs linking users, agents, and resources. Our system maintains two memory tiers: (1) private memory-private fragments visible only to their originating user; and (2) shared memory-selectively shared fragments. Each fragment carries immutable provenance attributes (contributing agents, accessed resources, and timestamps) to support retrospective permission checks. Granular read policies enforce current user-agent-resource constraints and project existing memory fragments into filtered transformed views. Write policies determine fragment retention and sharing, applying context-aware transformations to update the memory. Both policies may be designed conditioned on system, agent, and user-level information. Our framework enables safe, efficient, and interpretable cross-user knowledge sharing, with provable adherence to asymmetric, time-varying policies and full auditability of memory operations.

We present Listen, Attend and Spell (LAS), a neural network that learns to transcribe speech utterances to characters. Unlike traditional DNN-HMM models, this model learns all the components of a speech recognizer jointly. Our system has two components: a listener and a speller. The listener is a pyramidal recurrent network encoder that accepts filter bank spectra as inputs. The speller is an attention-based recurrent network decoder that emits characters as outputs. The network produces character sequences without making any independence assumptions between the characters. This is the key improvement of LAS over previous end-to-end CTC models. On a subset of the Google voice search task, LAS achieves a word error rate (WER) of 14.1% without a dictionary or a language model, and 10.3% with language model rescoring over the top 32 beams. By comparison, the state-of-the-art CLDNN-HMM model achieves a WER of 8.0%.

Joint spectral measurements are a powerful tool for characterising biphoton spectral correlation, which is crucial for quantum information and communication technologies. In these applications, highly pure biphoton states are essential in any time- and frequency-mode, often obviating the need for time-resolved measurements. Conversely, spectroscopy utilising entangled photon pairs is gaining significant attention for its ability to unveil molecular dynamics, a field that critically demands time-resolved capabilities. Here, we introduce a methodology for capturing a biphoton spectrum that comprises visible and near-infrared photons, resulting in a highly non-degenerate joint spectrum. Our system employs two non-scanning spectrographs: a fibre spectrometer for near-infrared photons and a delay-line-anode single-photon imager for visible photons. We successfully measure the joint spectral intensity by leveraging a time-tagging acquisition strategy. Furthermore, our approach uniquely enables time-resolved joint spectral measurements with respect to the laser synchronisation against the hundreds-of-picosecond instrument response function. Our methodology could advance heralded fluorescence spectroscopy using biphoton sources to investigate temporal dynamics of complex biological, chemical, and physical systems.

Indoor navigation remains a critical accessibility challenge for the blind and low-vision (BLV) individuals, as existing solutions rely on costly per-building infrastructure. We present an agentic framework that converts a single floor plan image into a structured, retrievable knowledge base to generate safe, accessible navigation instructions with lightweight infrastructure. The system has two phases: a multi-agent module that parses the floor plan into a spatial knowledge graph through a self-correcting pipeline with iterative retry loops and corrective feedback; and a Path Planner that generates accessible navigation instructions, with a Safety Evaluator agent assessing potential hazards along each route. We evaluate the system on the real-world UMBC Math and Psychology building (floors MP-1 and MP-3) and on the CVC-FP benchmark. On MP-1, we achieve success rates of 92.31%, 76.92%, and 61.54% for short, medium, and long routes, outperforming the strongest single-call baseline (Claude 3.7 Sonnet) at 84.62%, 69.23%, and 53.85%. On MP-3, we reach 76.92%, 61.54%, and 38.46%, compared to the best baseline at 61.54%, 46.15%, and 23.08%. These results show consistent gains over single-call LLM baselines and demonstrate that our workflow is a scalable solution for accessible indoor navigation for BLV individuals.

We present Varda-single-1.0, a medium-range data-driven weather prediction system built for the Alpine domain. It provides hourly deterministic regional forecasts on a mesh of 1 km resolution and global forecasts on a 31 km mesh. The system comprises two independently trained stretched-grid Graph Transformer models with encoder-processor-decoder architecture, developed in the Anemoi framework: a 6-hourly autoregressive forecaster and a temporal downscaler reconstructing hourly forecasts between the forecaster's steps. Its training curriculum includes pre-training on ERA5 reanalysis data, followed by training on a 20-year kilometre-scale regional reanalysis, and finally fine-tuning on operational kilometre-scale analyses. Verified over one year against operational analyses and surface station observations, Varda-single is competitive with or improves on MeteoSwiss' operational numerical weather prediction baselines for most headline scores and variables. It broadly matches the skill of the high-resolution 1 km ICON-CH1-EPS control at lead times up to +33 h and generally outperforms the 2 km ICON-CH2-EPS control at lead times up to +120 h. Despite competitive aggregate scores, Varda-single underestimates some local wind maxima and produces overly smooth convective precipitation fields, consistent with the smoothing associated with squared-error training. To gain insight into the model's behaviour, we investigate three case studies beyond the aggregated headline scores, and find particular weaknesses in Varda-single's representation of local winds over complex terrain. Varda-single represents an important step in the development of high-resolution ML forecasting over complex terrain, in complementing the operational regional numerical weather prediction models of MeteoSwiss with data-driven models and in providing a pretrained model for researchers and user-specific applications.

Autism Spectrum Disorder (ASD) is a neurodevelopmental disorder that often emerges in early childhood. ASD assessment typically involves an observation protocol including note-taking and ratings of child's social behavior conducted by a trained clinician. A robust machine learning (ML) model that is capable of labeling adult and child audio has the potential to save significant time and labor in manual coding children's behaviors. This may assist clinicians capture events of interest, better communicate events with parents, and educate new clinicians. In this study, we leverage the self-supervised learning model, Wav2Vec 2.0 (W2V2), pretrained on 4300h of home recordings of children under 5 years old, to build a unified system that performs both speaker diarization (SD) and vocalization classification (VC) tasks. We apply this system to two-channel audio recordings of brief 3-5 minute clinician-child interactions using the Rapid-ABC corpus. We propose a novel technique by introducing auxiliary features extracted from W2V2-based automatic speech recognition (ASR) system for children under 4 years old to improve children's VC task. We test our proposed method of improving children's VC task on two corpora (Rapid-ABC and BabbleCor) and observe consistent improvements. Furthermore, we reach, or perhaps outperform, the state-of-the-art performance of BabbleCor.

We propose PAniC-3D, a system to reconstruct stylized 3D character heads directly from illustrated (p)ortraits of (ani)me (c)haracters. Our anime-style domain poses unique challenges to single-view reconstruction; compared to natural images of human heads, character portrait illustrations have hair and accessories with more complex and diverse geometry, and are shaded with non-photorealistic contour lines. In addition, there is a lack of both 3D model and portrait illustration data suitable to train and evaluate this ambiguous stylized reconstruction task. Facing these challenges, our proposed PAniC-3D architecture crosses the illustration-to-3D domain gap with a line-filling model, and represents sophisticated geometries with a volumetric radiance field. We train our system with two large new datasets (11.2k Vroid 3D models, 1k Vtuber portrait illustrations), and evaluate on a novel AnimeRecon benchmark of illustration-to-3D pairs. PAniC-3D significantly outperforms baseline methods, and provides data to establish the task of stylized reconstruction from portrait illustrations.

Learning-based methods have achieved strong performance for quadrupedal locomotion. However, several challenges prevent quadrupeds from learning helpful indoor skills that require interaction with environments and humans: lack of end-effectors for manipulation, limited semantic understanding using only simulation data, and low traversability and reachability in indoor environments. We present a system for quadrupedal mobile manipulation in indoor environments. It uses a front-mounted gripper for object manipulation, a low-level controller trained in simulation using egocentric depth for agile skills like climbing and whole-body tilting, and pre-trained vision-language models (VLMs) with a third-person fisheye and an egocentric RGB camera for semantic understanding and command generation. We evaluate our system in two unseen environments without any real-world data collection or training. Our system can zero-shot generalize to these environments and complete tasks, like following user's commands to fetch a randomly placed stuff toy after climbing over a queen-sized bed, with a 60% success rate. Project website: https://helpful-doggybot.github.io/

Most novel view synthesis methods such as NeRF are unable to capture the true high dynamic range (HDR) radiance of scenes since they are typically trained on photos captured with standard low dynamic range (LDR) cameras. While the traditional exposure bracketing approach which captures several images at different exposures has recently been adapted to the multi-view case, we find such methods to fall short of capturing the full dynamic range of indoor scenes, which includes very bright light sources. In this paper, we present PanDORA: a PANoramic Dual-Observer Radiance Acquisition system for the casual capture of indoor scenes in high dynamic range. Our proposed system comprises two 360{\deg} cameras rigidly attached to a portable tripod. The cameras simultaneously acquire two 360{\deg} videos: one at a regular exposure and the other at a very fast exposure, allowing a user to simply wave the apparatus casually around the scene in a matter of minutes. The resulting images are fed to a NeRF-based algorithm that reconstructs the scene's full high dynamic range. Compared to HDR baselines from previous work, our approach reconstructs the full HDR radiance of indoor scenes without sacrificing the visual quality while retaining the ease of capture from recent NeRF-like approaches.

State-of-the-art sequence labeling systems traditionally require large amounts of task-specific knowledge in the form of hand-crafted features and data pre-processing. In this paper, we introduce a novel neutral network architecture that benefits from both word- and character-level representations automatically, by using combination of bidirectional LSTM, CNN and CRF. Our system is truly end-to-end, requiring no feature engineering or data pre-processing, thus making it applicable to a wide range of sequence labeling tasks. We evaluate our system on two data sets for two sequence labeling tasks --- Penn Treebank WSJ corpus for part-of-speech (POS) tagging and CoNLL 2003 corpus for named entity recognition (NER). We obtain state-of-the-art performance on both the two data --- 97.55\% accuracy for POS tagging and 91.21\% F1 for NER.

Rapid urbanization and improved living standards have led to a substantial increase in the number of vehicles on the road, consequently resulting in a rise in the frequency of accidents. Among these accidents, motorbike accidents pose a particularly high risk, often resulting in serious injuries or deaths. A significant number of these fatalities occur due to delayed or inadequate medical attention. To this end, we propose a novel automatic detection and notification system specifically designed for motorbike accidents. The proposed system comprises two key components: a detection system and a physiological signal monitoring system. The detection system is integrated into the helmet and consists of a microcontroller, accelerometer, GPS, GSM, and Wi-Fi modules. The physio-monitoring system incorporates a sensor for monitoring pulse rate and SpO_{2} saturation. All collected data are presented on an LCD display and wirelessly transmitted to the detection system through the microcontroller of the physiological signal monitoring system. If the accelerometer readings consistently deviate from the specified threshold decided through extensive experimentation, the system identifies the event as an accident and transmits the victim's information -- including the GPS location, pulse rate, and SpO_{2} saturation rate -- to the designated emergency contacts. Preliminary results demonstrate the efficacy of the proposed system in accurately detecting motorbike accidents and promptly alerting emergency contacts. We firmly believe that the proposed system has the potential to significantly mitigate the risks associated with motorbike accidents and save lives.

Respiratory diseases remain major global health challenges, and traditional auscultation is often limited by subjectivity, environmental noise, and inter-clinician variability. This study presents an explainable multimodal deep learning framework for automatic lung-disease detection using respiratory audio signals. The proposed system integrates two complementary representations: a spectral-temporal encoder based on a CNN-BiLSTM Attention architecture, and a handcrafted acoustic-feature encoder capturing physiologically meaningful descriptors such as MFCCs, spectral centroid, spectral bandwidth, and zero-crossing rate. These branches are combined through late-stage fusion to leverage both data-driven learning and domain-informed acoustic cues. The model is trained and evaluated on the Asthma Detection Dataset Version 2 using rigorous preprocessing, including resampling, normalization, noise filtering, data augmentation, and patient-level stratified partitioning. The study achieved strong generalization with 91.21% accuracy, 0.899 macro F1-score, and 0.9866 macro ROC-AUC, outperforming all ablated variants. An ablation study confirms the importance of temporal modeling, attention mechanisms, and multimodal fusion. The framework incorporates Grad-CAM, Integrated Gradients, and SHAP, generating interpretable spectral, temporal, and feature-level explanations aligned with known acoustic biomarkers to build clinical transparency. The findings demonstrate the framework's potential for telemedicine, point-of-care diagnostics, and real-world respiratory screening.

The development of Vision-Language-Action (VLA) models has been significantly accelerated by pre-trained Vision-Language Models (VLMs). However, most existing end-to-end VLAs treat the VLM primarily as a multimodal encoder, directly mapping vision-language features to low-level actions. This paradigm underutilizes the VLM's potential in high-level decision making and introduces training instability, frequently degrading its rich semantic representations. To address these limitations, we introduce DIAL, a framework bridging high-level decision making and low-level motor execution through a differentiable latent intent bottleneck. Specifically, a VLM-based System-2 performs latent world modeling by synthesizing latent visual foresight within the VLM's native feature space; this foresight explicitly encodes intent and serves as the structural bottleneck. A lightweight System-1 policy then decodes this predicted intent together with the current observation into precise robot actions via latent inverse dynamics. To ensure optimization stability, we employ a two-stage training paradigm: a decoupled warmup phase where System-2 learns to predict latent futures while System-1 learns motor control under ground-truth future guidance within a unified feature space, followed by seamless end-to-end joint optimization. This enables action-aware gradients to refine the VLM backbone in a controlled manner, preserving pre-trained knowledge. Extensive experiments on the RoboCasa GR1 Tabletop benchmark show that DIAL establishes a new state-of-the-art, achieving superior performance with 10x fewer demonstrations than prior methods. Furthermore, by leveraging heterogeneous human demonstrations, DIAL learns physically grounded manipulation priors and exhibits robust zero-shot generalization to unseen objects and novel configurations during real-world deployment on a humanoid robot.

We present a memory system for AI agents that treats stored information as continuous fields governed by partial differential equations rather than discrete entries in a database. The approach draws from classical field theory: memories diffuse through semantic space, decay thermodynamically based on importance, and interact through field coupling in multi-agent scenarios. We evaluate the system on two established long-context benchmarks: LoCoMo (ACL 2024) with 300-turn conversations across 35 sessions, and LongMemEval (ICLR 2025) testing multi-session reasoning over 500+ turns. On LongMemEval, the field-theoretic approach achieves significant improvements: +116% F1 on multi-session reasoning (p<0.01, d= 3.06), +43.8% on temporal reasoning (p<0.001, d= 9.21), and +27.8% retrieval recall on knowledge updates (p<0.001, d= 5.00). Multi-agent experiments show near-perfect collective intelligence (>99.8%) through field coupling. Code is available at github.com/rotalabs/rotalabs-fieldmem.

Current language model evaluations measure what models know under ideal conditions but not how robustly they know it under realistic stress. Static benchmarks like MMLU and TruthfulQA cannot distinguish a model that lacks knowledge from one whose verification mechanisms collapse when information degrades or adversaries probe for weaknesses. We introduce the Drill-Down and Fabricate Test (DDFT), a protocol that measures epistemic robustness: a model's ability to maintain factual accuracy under progressive semantic compression and adversarial fabrication. We propose a two-system cognitive model comprising a Semantic System that generates fluent text and an Epistemic Verifier that validates factual accuracy. Our findings, based on evaluating 9 frontier models across 8 knowledge domains at 5 compression levels (1,800 turn-level evaluations), reveal that epistemic robustness is orthogonal to conventional design paradigms. Neither parameter count (r=0.083, p=0.832) nor architectural type (r=0.153, p=0.695) significantly predicts robustness, suggesting it emerges from training methodology and verification mechanisms distinct from current approaches. Error detection capability strongly predicts overall robustness (rho=-0.817, p=0.007), indicating this is the critical bottleneck. We find that flagship models exhibit brittleness despite their scale, while smaller models can achieve robust performance, challenging assumptions about the relationship between model size and reliability. The DDFT framework provides both theoretical foundation and practical tools for assessing epistemic robustness before deployment in critical applications.

Artificial Intelligence has shown to help improve agricultural practices, yet adoption remains limited: 69% of U.S. farmers have privacy concerns with sharing their data, and these concerns must be addressed before adoption is widespread. While Federated Learning has been demonstrated to protect privacy at scale for other sectors, deploying a system for agriculture comes with its own set of challenges; the problem necessitates a system that can protect farmer data and identities while preserving model utility, runs on commodity hardware, and is resilient to fragile rural infrastructure. To address these concerns, we introduce the Private Computation Space (PCS), a deployed, open-source Machine Learning system to provision and process farmer data securely. We design a system tailored to an agricultural setting, with multi-cluster orchestration for reliability in rural areas with asynchronous Federated Learning (FL), Differential Privacy (DP), and Trusted Execution Environments (TEEs), to allow farms to participate in the framework while keeping their data private. We evaluate the system on two deployed workloads: monitoring nitrogen with living plant sensors in NY for six months and predicting evapotranspiration from weather stations in CA for ten months. Our evaluation finds a Dice Similarity Coefficient (DSC) of 0.71 and R^2 accuracy of 0.84 for the respective workloads, improving the worst single-site model accuracy by 22.4% and 9.1%, respectively, while preserving privacy.

Recently, few-shot voice cloning has achieved a significant improvement. However, most models for few-shot voice cloning are single-modal, and multi-modal few-shot voice cloning has been understudied. In this paper, we propose to use multi-modal learning to improve the few-shot voice cloning performance. Inspired by the recent works on unsupervised speech representation, the proposed multi-modal system is built by extending Tacotron2 with an unsupervised speech representation module. We evaluate our proposed system in two few-shot voice cloning scenarios, namely few-shot text-to-speech(TTS) and voice conversion(VC). Experimental results demonstrate that the proposed multi-modal learning can significantly improve the few-shot voice cloning performance over their counterpart single-modal systems.

Based on negative entropy in entanglement, it is shown that a single-system Copenhagen measurement protocol is equivalent to the two-system von Neumann scheme with the memory filling up the system with negative information similar to the Dirac sea of negative energy. After equating the two quantum measurement protocols, we then apply this equivalence to the black hole radiation. That is, the black hole evaporation corresponds to the quantum measurement process and the two evaporation approaches, the observable-based single-system and the two-system entanglement-based protocols, can be made equivalent using quantum memory. In particular, the measurement choice, \theta, with the memory state inside the horizon in the entanglement-based scheme is shown to correspond to the observable of the measurement choice, \theta, outside the horizon in the single-system protocol, that is, O_{\theta}^{out} = Q_{\theta}^{in}. This indicates that the black hole as quantum memory is filling up with negative information outside the horizon, and its entropy corresponds to the logarithm of a number of equally probable measurement choices. This shows that the black hole radiation is no different than ordinary quantum theory.

Rule-based models are attractive for various tasks because they inherently lead to interpretable and explainable decisions and can easily incorporate prior knowledge. However, such systems are difficult to apply to problems involving natural language, due to its linguistic variability. In contrast, neural models can cope very well with ambiguity by learning distributed representations of words and their composition from data, but lead to models that are difficult to interpret. In this paper, we describe a model combining neural networks with logic programming in a novel manner for solving multi-hop reasoning tasks over natural language. Specifically, we propose to use a Prolog prover which we extend to utilize a similarity function over pretrained sentence encoders. We fine-tune the representations for the similarity function via backpropagation. This leads to a system that can apply rule-based reasoning to natural language, and induce domain-specific rules from training data. We evaluate the proposed system on two different question answering tasks, showing that it outperforms two baselines -- BIDAF (Seo et al., 2016a) and FAST QA (Weissenborn et al., 2017b) on a subset of the WikiHop corpus and achieves competitive results on the MedHop data set (Welbl et al., 2017).

Macaron-V1 is an open agent-model family for experiential intelligence: learning from experience in real environments and continuing to learn after deployment. It is organized around two system goals. Adaptation is pursued through recursive improvement of versioned model-harness pairs, where experience from one configuration is evaluated under an external contract and used to construct its successor. Collaboration is pursued via the Mixture-of-LoRA (MoL) architecture that freezes a base model, composes specialist LoRA adapters, and selects one LoRA per user turn. The flagship Macaron-V1-Venti combines a 744B GLM-5.2 base with four LoRAs for chat, agent, coding, and GenUI; the Qwen3.6-based Macaron-V1-Tall (50B) uses the same design for local deployment. This report presents Macaron-V1 as a co-designed system spanning architecture, algorithms, and infrastructure. The MoL architecture supports continual learning through extensible LoRA specialists. The algorithm combines Model-Harness Co-design and recursive self-improvement loop, including the UI4A component-native GenUI harness, a stateful action substrate, versioned HCP contract, and the agentic RL framework MindForge. The supporting infrastructure includes the post-training platform MinT, the long-context RL method LongStraw, and stability techniques for sparse MoE and DSA base models. We evaluate Macaron-V1 on Personal Intelligence, GenUI, and general capability benchmarks against frontier baselines. Our results validate the current system, while compounding gains from continual learning and collective intelligence remain open questions.

This paper introduces LLM-MARS, first technology that utilizes a Large Language Model based Artificial Intelligence for Multi-Agent Robot Systems. LLM-MARS enables dynamic dialogues between humans and robots, allowing the latter to generate behavior based on operator commands and provide informative answers to questions about their actions. LLM-MARS is built on a transformer-based Large Language Model, fine-tuned from the Falcon 7B model. We employ a multimodal approach using LoRa adapters for different tasks. The first LoRa adapter was developed by fine-tuning the base model on examples of Behavior Trees and their corresponding commands. The second LoRa adapter was developed by fine-tuning on question-answering examples. Practical trials on a multi-agent system of two robots within the Eurobot 2023 game rules demonstrate promising results. The robots achieve an average task execution accuracy of 79.28% in compound commands. With commands containing up to two tasks accuracy exceeded 90%. Evaluation confirms the system's answers on operators questions exhibit high accuracy, relevance, and informativeness. LLM-MARS and similar multi-agent robotic systems hold significant potential to revolutionize logistics, enabling autonomous exploration missions and advancing Industry 5.0.

The emergence of large language models (LLMs) opens new frontiers for unmanned aerial vehicle (UAVs), yet existing systems remain confined to predefined tasks due to hardware-software co-design challenges. This paper presents the first aerial intelligent agent capable of open-world task execution through tight integration of LLM-based reasoning and robotic autonomy. Our hardware-software co-designed system addresses two fundamental limitations: (1) Onboard LLM operation via an edge-optimized computing platform, achieving 5-6 tokens/sec inference for 14B-parameter models at 220W peak power; (2) A bidirectional cognitive architecture that synergizes slow deliberative planning (LLM task planning) with fast reactive control (state estimation, mapping, obstacle avoidance, and motion planning). Validated through preliminary results using our prototype, the system demonstrates reliable task planning and scene understanding in communication-constrained environments, such as sugarcane monitoring, power grid inspection, mine tunnel exploration, and biological observation applications. This work establishes a novel framework for embodied aerial artificial intelligence, bridging the gap between task planning and robotic autonomy in open environments.

Sign language is a set of gestures that deaf people use to communicate. Unfortunately, normal people don't understand it, which creates a communication gap that needs to be filled. Because of the variations in (Egyptian Sign Language) ESL from one region to another, ESL provides a challenging research problem. In this work, we are providing applied research with its video-based Egyptian sign language recognition system that serves the local community of deaf people in Egypt, with a moderate and reasonable accuracy. We present a computer vision system with two different neural networks architectures. The first is a Convolutional Neural Network (CNN) for extracting spatial features. The CNN model was retrained on the inception mod. The second architecture is a CNN followed by a Long Short-Term Memory (LSTM) for extracting both spatial and temporal features. The two models achieved an accuracy of 90% and 72%, respectively. We examined the power of these two architectures to distinguish between 9 common words (with similar signs) among some deaf people community in Egypt.

Identifying effective interventions from the scientific literature is challenging due to the high volume of publications, specialized terminology, and inconsistent reporting formats, making manual curation laborious and prone to oversight. To address this challenge, this paper proposes a novel framework leveraging large language models (LLMs), which integrates a progressive ontology prompting (POP) algorithm with a dual-agent system, named LLM-Duo. On the one hand, the POP algorithm conducts a prioritized breadth-first search (BFS) across a predefined ontology, generating structured prompt templates and action sequences to guide the automatic annotation process. On the other hand, the LLM-Duo system features two specialized LLM agents, an explorer and an evaluator, working collaboratively and adversarially to continuously refine annotation quality. We showcase the real-world applicability of our framework through a case study focused on speech-language intervention discovery. Experimental results show that our approach surpasses advanced baselines, achieving more accurate and comprehensive annotations through a fully automated process. Our approach successfully identified 2,421 interventions from a corpus of 64,177 research articles in the speech-language pathology domain, culminating in the creation of a publicly accessible intervention knowledge base with great potential to benefit the speech-language pathology community.

World models have demonstrated impressive performance on robotic learning tasks. Many such tasks inherently demand multimodal reasoning; for example, filling a bottle with water will lead to visual information alone being ambiguous or incomplete, thereby requiring reasoning over the temporal evolution of audio, accounting for its underlying physical properties and pitch patterns. In this paper, we propose a generative latent flow matching model to anticipate future audio observations, enabling the system to reason about long-term consequences when integrated into a robot policy. We demonstrate the superior capabilities of our system through two manipulation tasks that require perceiving in-the-wild audio or music signals, compared to methods without future lookahead. We further emphasize that successful robot action learning for these tasks relies not merely on multi-modal input, but critically on the accurate prediction of future audio states that embody intrinsic rhythmic patterns.

As quantum hardware scales toward fault tolerant operation, the demand for correct quantum error correction (QEC) circuits far outpaces manual design capacity. AI agents offer a promising path to automating this synthesis, yet no benchmark exists to measure their progress on the specialized task of generating QEC circuits. We introduce StabilizerBench, a benchmark suite of 192 stabilizer codes spanning 12 families, 4-196 qubits, and distances 2-21, organized into three tasks of increasing difficulty: state preparation circuit generation, circuit optimization under semantic constraints, and fault tolerant circuit synthesis. Although motivated by QEC, stabilizer circuits exercise core competencies required for general quantum programming, including gate decomposition, qubit routing, and semantic preserving transformations, while admitting efficient verification via the Gottesman Knill theorem, enabling the benchmark to scale to large codes without the exponential cost of full unitary comparison. We define a unified generator weighted scoring system with two tiers: a capability score measuring breadth of success and a quality score capturing circuit merit. We also introduce continuous fault tolerance and optimization metrics that grade error resilience and circuit improvements beyond binary pass or fail. Following the design of classical benchmarks such as SWE-bench, StabilizerBench specifies inputs, verification oracles, and scoring but leaves prompts and agent strategies open. We evaluate three frontier AI agents and find the benchmark discriminates across models and tasks with substantial headroom for improvement.

In this paper, we propose an autonomous information seeking visual question answering framework, AVIS. Our method leverages a Large Language Model (LLM) to dynamically strategize the utilization of external tools and to investigate their outputs, thereby acquiring the indispensable knowledge needed to provide answers to the posed questions. Responding to visual questions that necessitate external knowledge, such as "What event is commemorated by the building depicted in this image?", is a complex task. This task presents a combinatorial search space that demands a sequence of actions, including invoking APIs, analyzing their responses, and making informed decisions. We conduct a user study to collect a variety of instances of human decision-making when faced with this task. This data is then used to design a system comprised of three components: an LLM-powered planner that dynamically determines which tool to use next, an LLM-powered reasoner that analyzes and extracts key information from the tool outputs, and a working memory component that retains the acquired information throughout the process. The collected user behavior serves as a guide for our system in two key ways. First, we create a transition graph by analyzing the sequence of decisions made by users. This graph delineates distinct states and confines the set of actions available at each state. Second, we use examples of user decision-making to provide our LLM-powered planner and reasoner with relevant contextual instances, enhancing their capacity to make informed decisions. We show that AVIS achieves state-of-the-art results on knowledge-intensive visual question answering benchmarks such as Infoseek and OK-VQA.

Mixed initiative in open-domain dialogue requires a system to pro-actively introduce new topics. The one-turn topic transition task explores how a system connects two topics in a cooperative and coherent manner. The goal of the task is to generate a "bridging" utterance connecting the new topic to the topic of the previous conversation turn. We are especially interested in commonsense explanations of how a new topic relates to what has been mentioned before. We first collect a new dataset of human one-turn topic transitions, which we call OTTers. We then explore different strategies used by humans when asked to complete such a task, and notice that the use of a bridging utterance to connect the two topics is the approach used the most. We finally show how existing state-of-the-art text generation models can be adapted to this task and examine the performance of these baselines on different splits of the OTTers data.

Autonomous driving in high-speed racing, as opposed to urban environments, presents significant challenges in scene understanding due to rapid changes in the track environment. Traditional sequential network approaches may struggle to meet the real-time knowledge and decision-making demands of an autonomous agent covering large displacements in a short time. This paper proposes a novel baseline architecture for developing sophisticated models capable of true hardware-enabled parallelism, achieving neural processing speeds that mirror the agent's high velocity. The proposed model (Parallel Perception Network (PPN)) consists of two independent neural networks, segmentation and reconstruction networks, running parallelly on separate accelerated hardware. The model takes raw 3D point cloud data from the LiDAR sensor as input and converts it into a 2D Bird's Eye View Map on both devices. Each network independently extracts its input features along space and time dimensions and produces outputs parallelly. The proposed method's model is trained on a system with two NVIDIA T4 GPUs, using a combination of loss functions, including edge preservation, and demonstrates a 2x speedup in model inference time compared to a sequential configuration. Implementation is available at: https://github.com/suwesh/Parallel-Perception-Network. Learned parameters of the trained networks are provided at: https://huggingface.co/suwesh/ParallelPerceptionNetwork.

Although native speech and music envelope following responses (EFRs) play a crucial role in auditory processing and cognition, their frequency profile, such as the dominating frequency and spectral coherence, is largely unknown. We have assumed that the auditory pathway - which transmits envelope components of speech and music to the scalp through time-varying neurophysiological processes - is a linear time-varying system, with the envelope and the multi-channel EEG responses as excitation and response, respectively. This paper investigates the transfer function of this system through two analytical techniques - time-averaged spectral responses and cross-spectral density - in the frequency domain at four different positions of the human scalp. Our findings suggest that alpha (8-11 Hz), lower gamma (53-56 Hz), and higher gamma (78-81 Hz) bands are the peak responses of the system. These frequently appearing dominant frequency responses may be the key components of familiar speech perception, maintaining attention, binding acoustic features, and memory processing. The cross-spectral density, which reflects the spatial neural coherence of the human brain, shows that 10-13 Hz, 27-29 Hz, and 62-64 Hz are common for all channel pairs. As neural coherences are frequently observed in these frequencies among native participants, we suggest that these distributed neural processes are also dominant in native speech and music perception.

Industrial-scale user representation learning requires balancing robust universality with acute task-sensitivity. However, existing paradigms primarily yield static, task-agnostic embeddings that struggle to reconcile the divergent requirements of downstream scenarios within unified vector spaces. Furthermore, heterogeneous multi-source data introduces inherent noise and modality conflicts, degrading representation. We propose Query-as-Anchor, a framework shifting user modeling from static encoding to dynamic, query-aware synthesis. To empower Large Language Models (LLMs) with deep user understanding, we first construct UserU, an industrial-scale pre-training dataset that aligns multi-modal behavioral sequences with user understanding semantics, and our Q-Anchor Embedding architecture integrates hierarchical coarse-to-fine encoders into dual-tower LLMs via joint contrastive-autoregressive optimization for query-aware user representation. To bridge the gap between general pre-training and specialized business logic, we further introduce Cluster-based Soft Prompt Tuning to enforce discriminative latent structures, effectively aligning model attention with scenario-specific modalities. For deployment, anchoring queries at sequence termini enables KV-cache-accelerated inference with negligible incremental latency. Evaluations on 10 Alipay industrial benchmarks show consistent SOTA performance, strong scalability, and efficient deployment. Large-scale online A/B testing in Alipay's production system across two real-world scenarios further validates its practical effectiveness. Our code is prepared for public release and will be available at: https://github.com/JhCircle/Q-Anchor.

We present a numerical framework to treat infinite time horizon spatially distributed optimal control problems via the associated canonical system derived by Pontryagin's Maximum Principle. The basic idea is to consider the canonical system in two steps. First we perform a bifurcation analysis of canonical steady states using the continuation and bifurcation package pde2path, yielding a number of so called flat and patterned canonical steady states. In a second step we link pde2path to the two point boundary value problem solver TOM to study time dependent canonical paths to steady states having the so called saddle point property. As an example we consider a shallow lake model with diffusion.

We present a comprehensive numerical study of a six-state clock model with a long-range dipolar type interaction. This model is motivated by the ferroelectric orders in the multiferroic hexagonal manganites. At low temperatures, trimerization of local atomic structures leads to six distinct but energetically degenerate structural distortion, which can be modeled by a six-state clock model. Moreover, the atomic displacements in the trimerized state further produce a local electric polarization whose sign depends on whether the clock variable is even or odd. These induced electric dipoles, which can be modeled by emergent Ising degrees of freedom, interact with each other via long-range dipolar interactions. Extensive Monte Carlo simulations are carried out to investigate low temperature phases resulting from the competing interactions. Upon lowering temperature, the system undergoes two Berezinskii-Kosterlitz-Thouless (BKT) transitions, characteristic of the standard six-state clock model in two dimensions. The dipolar interaction between emergent Ising spins induces a first-order transition into a ground state characterized by a three-fold degenerate stripe order. The intermediate phase between the discontinuous and the second BKT transition corresponds to a maze-like hexagonal liquid with short-range stripe ordering. Moreover, this intermediate phase also exhibits an unusual ferromagnetic order with two adjacent clock variables occupying the two types of stripes of the labyrinthine pattern.

Translating novels into films poses a grand challenge for generative artificial intelligence, requiring conversion of abstract literary prose into long-form, multi-scene visual narratives. While current video generation models excel at short, single-scene clips within narrow temporal and spatial contexts, novel-to-film generation operates in a more complex regime, demanding long-duration content across diverse scenes with dynamically evolving entity states. To address this, we formalize novel-to-film generation as dynamic cinematic world modeling, decomposed into two phases: construction, which grounds abstract, underspecified literary narratives into concrete, stateful, and persistent world entities; and evolution, which governs how these entities dynamically update under plot progression to maintain causal consistency across scenes. We propose FilmWorld, an end-to-end agentic system where two groups of specialized agents collaborate to instantiate these phases. Construction-side agents perform narrative structured translation, world entity state modeling with visual anchoring, and state-driven shot planning, progressively projecting literary language into a cinematic blueprint. Evolution-side agents perform state-anchored visual generation, cross-shot dynamic state propagation, and closed-loop state verification to maintain causal consistency and visual coherence. To address the evaluation gap in long-form generation, we introduce FilmEval, a systematic evaluation framework that couples a difficulty-graded benchmark of 15 representative novels with an automated protocol of nine objective metrics spanning three dimensions: cinematic presentation, film consistency, and novel fidelity. Experiments demonstrate that FilmWorld consistently outperforms state-of-the-art video generation agent systems, with particularly pronounced improvements in narrative fidelity and cross-scene consistency.

Modern virtual assistants use internal semantic parsing engines to convert user utterances to actionable commands. However, prior work has demonstrated that semantic parsing is a difficult multilingual transfer task with low transfer efficiency compared to other tasks. In global markets such as India and Latin America, this is a critical issue as switching between languages is prevalent for bilingual users. In this work we dramatically improve the zero-shot performance of a multilingual and codeswitched semantic parsing system using two stages of multilingual alignment. First, we show that constrastive alignment pretraining improves both English performance and transfer efficiency. We then introduce a constrained optimization approach for hyperparameter-free adversarial alignment during finetuning. Our Doubly Aligned Multilingual Parser (DAMP) improves mBERT transfer performance by 3x, 6x, and 81x on the Spanglish, Hinglish and Multilingual Task Oriented Parsing benchmarks respectively and outperforms XLM-R and mT5-Large using 3.2x fewer parameters.

In this paper, we discuss that an observable-based single-system Copenhagen and entanglement-based two-system von Neumann measurement protocols in quantum theory can be made equivalent by considering the second part of the two-system scheme to be a Dirac-type negative sea filling up the first system. Based on this equivalence, and by considering the universe as a computational process, the choice of the apparatus state in the two-system protocol can be identified with the choice of the observable in the single-system scheme as negative sea filling up the observable universe. In particular, the measuring party's state is considered to be evolving backwards in time to the big bang as a nondeterministic computational process, which chooses the acceptable path as a time-reversal process of irreversible computation. The suggested model proposes that the prepared microstate of the universe, or reality, corresponds to the observer's choice, therefore, subjective reality. Thus, this effectively provides a specific description of the subjective universe model previously proposed, which is based on the symmetry breakdown between the Schrodinger and the Heisenberg pictures of quantum theory.

Video generation is progressing beyond isolated clips toward long-form narratives and interactive worlds, requiring models to preserve identities, follow user controls, and remain stable over extended rollouts. We present JoyAI-Echo-1.5, a unified audio-visual generation system with two purpose-built variants. The long-video variant introduces composable cross-shot memory that aggregates visual evidence across multiple prior shots and speaker cues derived from speech-filtered full-shot audio, enabling persistent character appearance and voice identity across flexible combinations of text, image, and memory conditioning. The world-model variant converts heterogeneous navigation inputs into calibrated metric 6-DoF camera trajectories and injects them through a geometry-aware conditioning pathway, enabling controller-agnostic interaction across flexible viewpoints. To support efficient long-horizon generation, we transform a bidirectional audio-visual backbone into a causal few-step generator using progressive teacher forcing and short- and long-horizon Self-Gradient Forcing on self-generated rollouts. Experiments demonstrate strong performance in both settings. JoyAI-Echo-1.5 achieves improvements over existing long-video baselines in cross-shot consistency, visual quality, text alignment, and speech fidelity. Its world-model variant ranks first on WBench, with an average score of 81.7, and achieves leading visual quality and long-horizon persistence on SANA-WM-Bench. Together, these results indicate that memory, geometric control, and rollout-aware training provide a practical foundation for generating coherent stories and continuously evolving interactive worlds. Project page: https://echo-team-joy-future-academy-jd.github.io/Echo-1.5-Page/.

This report presents an Audio-aware Referring Video Object Segmentation (Ref-VOS) pipeline tailored to the MEVIS\_Audio setting, where the referring expression is provided in spoken form rather than as clean text. Compared with a standard Sa2VA-based Ref-VOS pipeline, the proposed system introduces two additional front-end stages: speech transcription and visual existence verification. Specifically, we first employ VibeVoice-ASR to convert long-form spoken input into a structured textual transcript. Since audio-derived queries are inherently noisy and may describe entities that are not visually present in the video, we then introduce an Omni-based judgment module to determine whether the transcribed target can be grounded in the visual content. If the target is judged to be absent, the pipeline terminates early and outputs all-zero masks. Otherwise, the transcript is transformed into a segmentation-oriented prompt and fed into Sa2VA to obtain a coarse mask trajectory over the full video. Importantly, this trajectory is treated as an initial semantic hypothesis rather than a final prediction. On top of it, an agentic refinement layer evaluates query reliability, temporal relevance, anchor quality, and potential error sources, and may invoke SAM3 to improve spatial boundary precision and temporal consistency. The resulting framework explicitly decomposes the MEVIS\_Audio task into audio-to-text conversion, visual existence verification, coarse video segmentation, and agent-guided refinement. Such a staged design is substantially more appropriate for audio-conditioned Ref-VOS than directly sending noisy ASR outputs into a segmentation model.

Professional-document review is a constraint-checking problem in which decisions depend on relations among text, geometry, pages, and document revisions. We present an evidence-grounded pipeline that normalizes extracted facts, executes four-state rules deterministically, retains source spans, and escalates unresolved cases. We evaluate its PDF evidence allocator on 160 reference-based tasks from 29 construction projects using a repeated four-system test and a disjoint two-system breadth extension. In the repeated test, reallocating a four-image budget from retrieved page overviews to one overview and three overlapping tiles improves project-family standardized decision accuracy by 10.6 percentage points (95% project-cluster bootstrap CI: 4.3 to 18.0; exact p = 0.031). This effect does not persist in the broader block: Region-RAG changes accuracy by -4.1 points (95% CI: -10.2 to 1.9; exact p = 0.209), while an equal-image sensitivity favors page breadth. Exact finding-set recovery remains low, false passes remain common, and repeated-run agreement is poorly calibrated. The results identify a resolution-breadth trade-off rather than a universal advantage for region-focused evidence, motivating rule-aware evidence routing and expert review.

Collecting real-world manipulation trajectory data involving robotic arms is essential for developing general-purpose action policies in robotic manipulation, yet such data remains scarce. Existing methods face limitations such as high costs, labor intensity, hardware dependencies, and complex setup requirements involving SLAM algorithms. In this work, we introduce Fast-UMI, an interface-mediated manipulation system comprising two key components: a handheld device operated by humans for data collection and a robot-mounted device used during policy inference. Our approach employs a decoupled design compatible with a wide range of grippers while maintaining consistent observation perspectives, allowing models trained on handheld-collected data to be directly applied to real robots. By directly obtaining the end-effector pose using existing commercial hardware products, we eliminate the need for complex SLAM deployment and calibration, streamlining data processing. Fast-UMI provides supporting software tools for efficient robot learning data collection and conversion, facilitating rapid, plug-and-play functionality. This system offers an efficient and user-friendly tool for robotic learning data acquisition.

Hands play a central role in daily life, yet modeling natural hand motions remains underexplored. Existing methods that tackle text-to-hand-motion generation or hand animation captioning rely on studio-captured datasets with limited actions and contexts, making them costly to scale to "in-the-wild" settings. Further, contemporary models and their training schemes struggle to capture animation fidelity with text-motion alignment. To address this, we (1) introduce '3D Hands in the Wild' (3D-HIW), a dataset of 32K 3D hand-motion sequences and aligned text, and (2) propose CLUTCH, an LLM-based hand animation system with two critical innovations: (a) SHIFT, a novel VQ-VAE architecture to tokenize hand motion, and (b) a geometric refinement stage to finetune the LLM. To build 3D-HIW, we propose a data annotation pipeline that combines vision-language models (VLMs) and state-of-the-art 3D hand trackers, and apply it to a large corpus of egocentric action videos covering a wide range of scenarios. To fully capture motion in-the-wild, CLUTCH employs SHIFT, a part-modality decomposed VQ-VAE, which improves generalization and reconstruction fidelity. Finally, to improve animation quality, we introduce a geometric refinement stage, where CLUTCH is co-supervised with a reconstruction loss applied directly to decoded hand motion parameters. Experiments demonstrate state-of-the-art performance on text-to-motion and motion-to-text tasks, establishing the first benchmark for scalable in-the-wild hand motion modelling. Code, data and models will be released.

When a text is translated, does the translation retain the complexity of the original? We introduce ComplexityMT, a new challenge for assessing how text complexity and machine translation interact with and influence each other, using the Common European Framework of Reference for Languages (CEFR) levels as the measure of text complexity. Across six languages, including Arabic, Dutch, English, French, Hindi, and Russian, we evaluate three open-weight models, one closed model, and a commercial machine translation system on two tasks: i) correlation of CEFR with translation difficulty, and ii) shifts in CEFR levels of the source texts. Our experiments show that higher CEFR levels make texts more difficult to translate, and that machine translation shifts the CEFR level of the target text compared to the original source, for most languages. These findings provide new insights for researchers and practitioners working on multilingual pedagogical content generation and machine translation difficulty estimation.

The Agent and AIGC (Artificial Intelligence Generated Content) technologies have recently made significant progress. We propose AesopAgent, an Agent-driven Evolutionary System on Story-to-Video Production. AesopAgent is a practical application of agent technology for multimodal content generation. The system integrates multiple generative capabilities within a unified framework, so that individual users can leverage these modules easily. This innovative system would convert user story proposals into scripts, images, and audio, and then integrate these multimodal contents into videos. Additionally, the animating units (e.g., Gen-2 and Sora) could make the videos more infectious. The AesopAgent system could orchestrate task workflow for video generation, ensuring that the generated video is both rich in content and coherent. This system mainly contains two layers, i.e., the Horizontal Layer and the Utility Layer. In the Horizontal Layer, we introduce a novel RAG-based evolutionary system that optimizes the whole video generation workflow and the steps within the workflow. It continuously evolves and iteratively optimizes workflow by accumulating expert experience and professional knowledge, including optimizing the LLM prompts and utilities usage. The Utility Layer provides multiple utilities, leading to consistent image generation that is visually coherent in terms of composition, characters, and style. Meanwhile, it provides audio and special effects, integrating them into expressive and logically arranged videos. Overall, our AesopAgent achieves state-of-the-art performance compared with many previous works in visual storytelling. Our AesopAgent is designed for convenient service for individual users, which is available on the following page: https://aesopai.github.io/.

This paper introduces DeepPsy-Agent, an innovative psychological support system that combines the three-stage helping theory in psychology with deep learning techniques. The system consists of two core components: (1) a multi-stage response-capable dialogue model (deeppsy-chat), which enhances reasoning capabilities through stage-awareness and deep-thinking analysis to generate high-quality responses; and (2) a real-time stage transition detection model that identifies contextual shifts to guide the dialogue towards more effective intervention stages. Based on 30,000 real psychological hotline conversations, we employ AI-simulated dialogues and expert re-annotation strategies to construct a high-quality multi-turn dialogue dataset. Experimental results demonstrate that DeepPsy-Agent outperforms general-purpose large language models (LLMs) in key metrics such as problem exposure completeness, cognitive restructuring success rate, and action adoption rate. Ablation studies further validate the effectiveness of stage-awareness and deep-thinking modules, showing that stage information contributes 42.3\% to performance, while the deep-thinking module increases root-cause identification by 58.3\% and reduces ineffective suggestions by 72.1\%. This system addresses critical challenges in AI-based psychological support through dynamic dialogue management and deep reasoning, advancing intelligent mental health services.

In financial trading, large language model (LLM)-based agents demonstrate significant potential. However, the high sensitivity to market noise undermines the performance of LLM-based trading systems. To address this limitation, we propose a novel multi-agent system featuring an internal competitive mechanism inspired by modern corporate management structures. The system consists of two specialized teams: (1) Data Team - responsible for processing and condensing massive market data into diversified text factors, ensuring they fit the model's constrained context. (2) Research Team - tasked with making parallelized multipath trading decisions based on deep research methods. The core innovation lies in implementing a real-time evaluation and ranking mechanism within each team, driven by authentic market feedback. Each agent's performance undergoes continuous scoring and ranking, with only outputs from top-performing agents being adopted. The design enables the system to adaptively adjust to dynamic environment, enhances robustness against market noise and ultimately delivers superior trading performance. Experimental results demonstrate that our proposed system significantly outperforms prevailing multi-agent systems and traditional quantitative investment methods across diverse evaluation metrics. ContestTrade is open-sourced on GitHub at https://github.com/FinStep-AI/ContestTrade.

Existing multi-LLM collaboration systems often encounter scalability challenges when integrating new LLMs and tasks, leading to suboptimal performance. To address this, we propose SMCS, a Scalable Multi-LLM Collaboration System designed to effectively coordinate multiple open-source LLMs. The system consists of two core components: a Retrieval-based Prior Selection (RPS) module, which dynamically selects the most suitable LLMs for each input, and an Exploration-Exploitation-Driven Posterior Enhancement (EPE) module, which fosters response diversity and selects high-quality outputs through a hybrid scoring mechanism. Experiments on eight mainstream benchmarks validate the effectiveness of our system: by integrating fifteen open-source LLMs, SMCS outperforms prevailing closed-source LLMs, e.g., GPT-4.1(+5.36%) and GPT-o3-mini(+5.28%) across multiple tasks. Remarkably, it even exceeds the average of best results on different datasets with open-source LLMs (+2.86%), significantly advancing the empirical performance frontier of open-source collaboration. The code is released at https://github.com/magent4aci/SMCS.

Due to the inevitable presence of quality problems, quality inspection of remote sensing images is indeed an indispensable step between the acquisition and the application of them. However, traditional manual inspection suffers from low efficiency. Hence, we propose a novel deep learning-based two-step intelligent system consisting of multiple advanced computer vision models, which first performs image classification by SwinV2 and then accordingly adopts the most appropriate method, such as semantic segmentation by Segformer, to localize the quality problems. Results demonstrate that the proposed method exhibits excellent performance and efficiency, surpassing traditional methods. Furthermore, we conduct an initial exploration of applying multimodal models to remote sensing image quality inspection.

We investigate equilibration and generalized thermalization of the quantum Harmonic chain under local quantum quench. The quench action we consider is connecting two disjoint harmonic chains of different sizes and the system jumps between two integrable settings. We verify the validity of the Generalized Gibbs Ensemble description for this infinite dimensional Hilbert space system and also identify equilibration between the subsystems as in classical systems. Using Bogoliubov transformations, we show that the eigenstates of the system prior to the quench evolve towards the Gibbs Generalized Ensemble description. Eigenstates that are more delocalized (in the sense of inverse participation ratio) prior to the quench, tend to equilibrate more rapidly. Further, through the phase space properties of a Generalized Gibbs Ensemble and the strength of stimulated emission, we identify the necessary criterion on the initial states for such relaxation at late times and also find out the states which would potentially not be described by the Gibbs Generalized Ensemble description.

Automated incident management plays a pivotal role in large-scale microservice systems. However, many existing methods rely solely on single-modal data (e.g., metrics, logs, and traces) and struggle to simultaneously address multiple downstream tasks, including anomaly detection (AD), failure triage (FT), and root cause localization (RCL). Moreover, the lack of clear reasoning evidence in current techniques often leads to insufficient interpretability. To address these limitations, we propose TrioXpert, an end-to-end incident management framework capable of fully leveraging multimodal data. TrioXpert designs three independent data processing pipelines based on the inherent characteristics of different modalities, comprehensively characterizing the operational status of microservice systems from both numerical and textual dimensions. It employs a collaborative reasoning mechanism using large language models (LLMs) to simultaneously handle multiple tasks while providing clear reasoning evidence to ensure strong interpretability. We conducted extensive evaluations on two microservice system datasets, and the experimental results demonstrate that TrioXpert achieves outstanding performance in AD (improving by 4.7% to 57.7%), FT (improving by 2.1% to 40.6%), and RCL (improving by 1.6% to 163.1%) tasks. TrioXpert has also been deployed in Lenovo's production environment, demonstrating substantial gains in diagnostic efficiency and accuracy.

The X-rays and Extreme Ultraviolet (XUV) emission from M stars can drive the atmospheric escape on planets orbiting them. M stars are also known for their frequent emission of stellar flares, which will increase the high-energy flux received by their orbiting planets. To understand how stellar flares impact the primordial atmospheres of planets orbiting young M stars, we use UV spectroscopic data of flares from the Habitable Zones and M dwarf Activity across Time (HAZMAT) and Measurements of the Ultraviolet Spectral Characteristics of Low-mass Exoplanetary Systems (MUSCLES) programs as a proxy to the XUV flare emission. Using the software package VPLanet, we simulate the young AU Mic planetary system composed of two Neptune-sized and one Earth-sized planet orbiting a 23-Myr-old M1 star. Our findings show that the Earth-sized planet AU Mic d should be in the process of losing completely its atmosphere in the next couple million years, solely due to the quiescent emission, with flares not significantly contributing to its atmospheric escape due to the small size of AU mic d and its close-in distance from the star. However, our results indicate that flares would play a crucial role for such planets further away, in the habitable zone (i.e. 0.2935 AU) of AU Mic-like stars during the post-saturation phase, accelerating the total atmospheric loss process by a few billion years. For planets between 0.365 AU and the HZ outer edge, the additional XUV from flares is necessary to deplete primordial atmospheres fully since the quiescent emission alone is insufficient.

Image retrieval systems conventionally use a two-stage paradigm, leveraging global features for initial retrieval and local features for reranking. However, the scalability of this method is often limited due to the significant storage and computation cost incurred by local feature matching in the reranking stage. In this paper, we present SuperGlobal, a novel approach that exclusively employs global features for both stages, improving efficiency without sacrificing accuracy. SuperGlobal introduces key enhancements to the retrieval system, specifically focusing on the global feature extraction and reranking processes. For extraction, we identify sub-optimal performance when the widely-used ArcFace loss and Generalized Mean (GeM) pooling methods are combined and propose several new modules to improve GeM pooling. In the reranking stage, we introduce a novel method to update the global features of the query and top-ranked images by only considering feature refinement with a small set of images, thus being very compute and memory efficient. Our experiments demonstrate substantial improvements compared to the state of the art in standard benchmarks. Notably, on the Revisited Oxford+1M Hard dataset, our single-stage results improve by 7.1%, while our two-stage gain reaches 3.7% with a strong 64,865x speedup. Our two-stage system surpasses the current single-stage state-of-the-art by 16.3%, offering a scalable, accurate alternative for high-performing image retrieval systems with minimal time overhead. Code: https://github.com/ShihaoShao-GH/SuperGlobal.

This paper presents the TartuNLP team submission to EvaLatin 2024 shared task of the emotion polarity detection for historical Latin texts. Our system relies on two distinct approaches to annotating training data for supervised learning: 1) creating heuristics-based labels by adopting the polarity lexicon provided by the organizers and 2) generating labels with GPT4. We employed parameter efficient fine-tuning using the adapters framework and experimented with both monolingual and cross-lingual knowledge transfer for training language and task adapters. Our submission with the LLM-generated labels achieved the overall first place in the emotion polarity detection task. Our results show that LLM-based annotations show promising results on texts in Latin.

In this work, we propose and study a double Kondo lattice model which hosts robust superconductivity. The system consists of two identical Kondo lattice model, each with Kondo coupling J_K within each layer, while the localized spin moments are coupled together via an inter-layer on-site antiferromagnetic spin coupling J_perp. We consider the strong J_perp limit, wherein the local moments tend to form rung singlets and are thus gapped. However, the Kondo coupling J_K transmits the inter-layer entanglement between the local moments to the itinerant electrons. Consequently, the itinerant electrons experience a strong inter-layer antiferromangetic spin coupling and form strong inter-layer pairing, which is confirmed through numerical simulation in one dimensional system. Experimentally, the J_K rightarrow -infty limits of the model describes the recently found bilayer nickelate La_3Ni_2O_7, while the J_K>0 side can be realized in tetralayer optical lattice of cold atoms. Two extreme limits, J_K rightarrow -infty and J_K rightarrow +infty limit are shown to be simplified to a bilayer type II t-J model and a bilayer one-orbital t-J model, respectively. Thus, our double Kondo lattice model offers a unified framework for nickelate superconductor and tetralayer optical lattice quantum simulator upon changing the sign of J_K. We highlight both the qualitative similarity and the quantitative difference in the two sides of J_K. Finally, we discuss the possibility of a symmetric Kondo breakdown transition in the model with a symmetric pseudogap metal corresponding to the usual heavy Fermi liquid.

In this paper, the authors propose TriBERTa, a supervised entity resolution system that utilizes a pre-trained large language model and a triplet loss function to learn representations for entity matching. The system consists of two steps: first, name entity records are fed into a Sentence Bidirectional Encoder Representations from Transformers (SBERT) model to generate vector representations, which are then fine-tuned using contrastive learning based on a triplet loss function. Fine-tuned representations are used as input for entity matching tasks, and the results show that the proposed approach outperforms state-of-the-art representations, including SBERT without fine-tuning and conventional Term Frequency-Inverse Document Frequency (TF-IDF), by a margin of 3 - 19%. Additionally, the representations generated by TriBERTa demonstrated increased robustness, maintaining consistently higher performance across a range of datasets. The authors also discussed the importance of entity resolution in today's data-driven landscape and the challenges that arise when identifying and reconciling duplicate data across different sources. They also described the ER process, which involves several crucial steps, including blocking, entity matching, and clustering.

The Canadian air travel sector has seen a significant increase in flight delays, cancellations, and other issues concerning passenger rights. Recognizing this demand, we present a chatbot to assist passengers and educate them about their rights. Our system breaks a complex user input into simple queries which are used to retrieve information from a collection of documents detailing air travel regulations. The most relevant passages from these documents are presented along with links to the original documents and the generated queries, enabling users to dissect and leverage the information for their unique circumstances. The system successfully overcomes two predominant challenges: understanding complex user inputs, and delivering accurate answers, free of hallucinations, that passengers can rely on for making informed decisions. A user study comparing the chatbot to a Google search demonstrated the chatbot's usefulness and ease of use. Beyond the primary goal of providing accurate and timely information to air passengers regarding their rights, we hope that this system will also enable further research exploring the tradeoff between the user-friendly conversational interface of chatbots and the accuracy of retrieval systems.

The paper presents a Traffic Sign Recognition (TSR) system, which can fast and accurately recognize traffic signs of different sizes in images. The system consists of two well-designed Convolutional Neural Networks (CNNs), one for region proposals of traffic signs and one for classification of each region. In the proposal CNN, a Fully Convolutional Network (FCN) with a dual multi-scale architecture is proposed to achieve scale invariant detection. In training the proposal network, a modified "Online Hard Example Mining" (OHEM) scheme is adopted to suppress false positives. The classification network fuses multi-scale features as representation and adopts an "Inception" module for efficiency. We evaluate the proposed TSR system and its components with extensive experiments. Our method obtains 99.88% precision and 96.61% recall on the Swedish Traffic Signs Dataset (STSD), higher than state-of-the-art methods. Besides, our system is faster and more lightweight than state-of-the-art deep learning networks for traffic sign recognition.

Enterprise ERP systems managing hundreds of thousands of employee records face critical data quality challenges when human resources departments perform decentralized manual entry across multiple languages. We present an end-to-end pipeline combining automated data cleaning with LLM-driven SQL query generation, deployed on a production system managing 240,000 employee records over six months. The system operates in two integrated stages: a multi-stage cleaning pipeline that performs translation normalization, spelling correction, and entity deduplication during periodic synchronization from Microsoft SQL Server to PostgreSQL; and a retrieval-augmented generation framework powered by GPT-4o that translates natural-language questions in Turkish, Russian, and English into validated SQL queries. The query engine employs LangChain orchestration, FAISS vector similarity search, and few-shot learning with 500+ validated examples. Our evaluation demonstrates 92.5% query validity, 95.1% schema compliance, and 90.7\% semantic accuracy on 2,847 production queries. The system reduces query turnaround time from 2.3 days to under 5 seconds while maintaining 99.2% uptime, with GPT-4o achieving 46% lower latency and 68% cost reduction versus GPT-3.5. This modular architecture provides a reproducible framework for AI-native enterprise data governance, demonstrating real-world viability at enterprise scale with 4.3/5.0 user satisfaction.

The growing demand for high-fidelity 4D hand-object interaction (HOI) data in embodied AI and spatial computing is currently bottlenecked by the reliance on pre-scanned object templates and physical markers. While recent methods have demonstrated promising results in reconstructing 4D hand-object interaction from videos, they are highly sensitive to initial estimates of hand and object poses. Yet, estimating these poses from images is challenging, in particular under severe occlusion which is inherent in hand-object interaction scenarios. We propose a novel system for the robust and accurate reconstruction of hands and objects from synchronized and calibrated multi-view videos without requiring any templates or markers. Our system consists of two main components with key innovations: (1) a multi-view feed-forward transformer model that aggregates cross-view geometry and temporal cues to provide a reliable, metric-consistent initialization for both poses and dense object geometry, and (2) a hand-object physics-aware Gaussian-based optimization framework to refine the initial estimates, integrating tetrahedral constraints, collision refinement, and appearance decomposition to produce physically plausible and visually accurate reconstruction. Validated on public benchmarks and an extensive internal dataset, our pipeline achieves highly robust, artifact-free reconstruction, providing an efficient foundation for automated 4D asset generation. Our project page are available at https://zyshen021.github.io/HOSTPG/.

Current medical question answering systems have difficulty processing long, detailed and informally worded questions submitted by patients, called Consumer Health Questions (CHQs). To address this issue, we introduce a medical question understanding and answering system with knowledge grounding and semantic self-supervision. Our system is a pipeline that first summarizes a long, medical, user-written question, using a supervised summarization loss. Then, our system performs a two-step retrieval to return answers. The system first matches the summarized user question with an FAQ from a trusted medical knowledge base, and then retrieves a fixed number of relevant sentences from the corresponding answer document. In the absence of labels for question matching or answer relevance, we design 3 novel, self-supervised and semantically-guided losses. We evaluate our model against two strong retrieval-based question answering baselines. Evaluators ask their own questions and rate the answers retrieved by our baselines and own system according to their relevance. They find that our system retrieves more relevant answers, while achieving speeds 20 times faster. Our self-supervised losses also help the summarizer achieve higher scores in ROUGE, as well as in human evaluation metrics. We release our code to encourage further research.

This paper presents a novel framework for converting 2D videos to immersive stereoscopic 3D, addressing the growing demand for 3D content in immersive experience. Leveraging foundation models as priors, our approach overcomes the limitations of traditional methods and boosts the performance to ensure the high-fidelity generation required by the display devices. The proposed system consists of two main steps: depth-based video splatting for warping and extracting occlusion mask, and stereo video inpainting. We utilize pre-trained stable video diffusion as the backbone and introduce a fine-tuning protocol for the stereo video inpainting task. To handle input video with varying lengths and resolutions, we explore auto-regressive strategies and tiled processing. Finally, a sophisticated data processing pipeline has been developed to reconstruct a large-scale and high-quality dataset to support our training. Our framework demonstrates significant improvements in 2D-to-3D video conversion, offering a practical solution for creating immersive content for 3D devices like Apple Vision Pro and 3D displays. In summary, this work contributes to the field by presenting an effective method for generating high-quality stereoscopic videos from monocular input, potentially transforming how we experience digital media.

Recent text-to-image generation models have achieved remarkable visual quality, but improving them through post-training remains challenging because no single reward signal captures the full range of human preference. In this work, we develop a simple and effective post-training recipe for open-domain text-to-image generation based on the composition of complementary reward signals. Our reward system consists of two main components: a preference reward, trained on large-scale human preference data using a Bradley-Terry objective to capture overall human aesthetic and perceptual preferences, and rubric-based rewards, which explicitly evaluate prompt faithfulness and other desirable properties while providing safeguards against reward hacking. A key challenge is how to combine these heterogeneous reward signals. We show that a naive weighted average leads to suboptimal optimization behavior, and propose a simple reward composition strategy that more effectively balances preference optimization with rubric satisfaction. In the Arena text-to-image leaderboard (https://arena.ai/), our RL-trained Flux2dev achieves an Elo rating 69 points above the base model, and our post-trained Ideogram-4 surpasses every open-source model on the leaderboard, reaching an Elo of 1223.5. (Claims of state-of-the-art performance are based on the Arena leaderboard snapshot as of September 4, 2026.) Our results suggest that effective rewards for frontier generative-model training require broad coverage of user intent and robustness to exploitation under optimization. To support reproducible research, we release Arena-T2I-Training, a 1K subset of training data that recovers some gains of full-scale training, providing a resource that we hope will facilitate future work on post-training for text-to-image models.

In spite of recent progress, image diffusion models still produce artifacts. A common solution is to leverage the feedback provided by quality assessment systems or human annotators to optimize the model, where images are generally rated in their entirety. In this work, we believe problem-solving starts with identification, yielding the request that the model should be aware of not just the presence of defects in an image, but their specific locations. Motivated by this, we propose DiffDoctor, a two-stage pipeline to assist image diffusion models in generating fewer artifacts. Concretely, the first stage targets developing a robust artifact detector, for which we collect a dataset of over 1M flawed synthesized images and set up an efficient human-in-the-loop annotation process, incorporating a carefully designed class-balance strategy. The learned artifact detector is then involved in the second stage to optimize the diffusion model by providing pixel-level feedback. Extensive experiments on text-to-image diffusion models demonstrate the effectiveness of our artifact detector as well as the soundness of our diagnose-then-treat design.

Quantum Zeno Effect (QZE) has been one of the most interesting phenomena in quantum mechanics ever since its discovery in 1977 by Misra and Sudarshan [J. Math. Phys. 18, 756 (1977)]. There have been many attempts for experimental realization of the same. Here, we present the first ever simulation of QZE on IBM quantum experience platform. We simulate a two-level system for Rabi-driven oscillation and then disturb the time evolution by intermediate repetitive measurements using quantum gates to increase the survival probability of the qubit in the initial state. The circuits are designed along with the added intermediate measurements and executed on IBM quantum simulator, and the outcomes are shown to be consistent with the predictions. The increasing survival probability with the number of intermediate measurements demonstrates QZE. Furthermore, some alternative explanations for the obtained results are provided which leads to some ambiguity in giving the exact reasoning for the observed outcomes.

Beamforming has been extensively investigated for multi-channel audio processing tasks. Recently, learning-based beamforming methods, sometimes called neural beamformers, have achieved significant improvements in both signal quality (e.g. signal-to-noise ratio (SNR)) and speech recognition (e.g. word error rate (WER)). Such systems are generally non-causal and require a large context for robust estimation of inter-channel features, which is impractical in applications requiring low-latency responses. In this paper, we propose filter-and-sum network (FaSNet), a time-domain, filter-based beamforming approach suitable for low-latency scenarios. FaSNet has a two-stage system design that first learns frame-level time-domain adaptive beamforming filters for a selected reference channel, and then calculate the filters for all remaining channels. The filtered outputs at all channels are summed to generate the final output. Experiments show that despite its small model size, FaSNet is able to outperform several traditional oracle beamformers with respect to scale-invariant signal-to-noise ratio (SI-SNR) in reverberant speech enhancement and separation tasks. Moreover, when trained with a frequency-domain objective function on the CHiME-3 dataset, FaSNet achieves 14.3\% relative word error rate reduction (RWERR) compared with the baseline model. These results show the efficacy of FaSNet particularly in reverberant and noisy signal conditions.

Recent talking avatar generation models have made strides in achieving realistic and accurate lip synchronization with the audio, but often fall short in controlling and conveying detailed expressions and emotions of the avatar, making the generated video less vivid and controllable. In this paper, we propose a novel text-guided approach for generating emotionally expressive 2D avatars, offering fine-grained control, improved interactivity, and generalizability to the resulting video. Our framework, named InstructAvatar, leverages a natural language interface to control the emotion as well as the facial motion of avatars. Technically, we design an automatic annotation pipeline to construct an instruction-video paired training dataset, equipped with a novel two-branch diffusion-based generator to predict avatars with audio and text instructions at the same time. Experimental results demonstrate that InstructAvatar produces results that align well with both conditions, and outperforms existing methods in fine-grained emotion control, lip-sync quality, and naturalness. Our project page is https://wangyuchi369.github.io/InstructAvatar/.

Wires and powerlines are common visual distractions that often undermine the aesthetics of photographs. The manual process of precisely segmenting and removing them is extremely tedious and may take up hours, especially on high-resolution photos where wires may span the entire space. In this paper, we present an automatic wire clean-up system that eases the process of wire segmentation and removal/inpainting to within a few seconds. We observe several unique challenges: wires are thin, lengthy, and sparse. These are rare properties of subjects that common segmentation tasks cannot handle, especially in high-resolution images. We thus propose a two-stage method that leverages both global and local contexts to accurately segment wires in high-resolution images efficiently, and a tile-based inpainting strategy to remove the wires given our predicted segmentation masks. We also introduce the first wire segmentation benchmark dataset, WireSegHR. Finally, we demonstrate quantitatively and qualitatively that our wire clean-up system enables fully automated wire removal with great generalization to various wire appearances.

This paper presents a highly efficient Retrieval-Augmented Generation (RAG) system built specifically for Ukrainian document question answering, which achieved 2nd place in the UNLP 2026 Shared Task. Our solution features a custom two-stage search pipeline that retrieves relevant document pages, paired with a specialized Ukrainian language model fine-tuned on synthetic data to generate accurate, grounded answers. Finally, we compress the model for lightweight deployment. Evaluated under strict computational limits, our architecture demonstrates that high-quality, verifiable AI question answering can be achieved locally on resource-constrained hardware without sacrificing accuracy.

Instruction-finetuned Large Language Models inherit clear political leanings that have been shown to influence downstream task performance. We expand this line of research beyond the two-party system in the US and audit Llama Chat in the context of EU politics in various settings to analyze the model's political knowledge and its ability to reason in context. We adapt, i.e., further fine-tune, Llama Chat on speeches of individual euro-parties from debates in the European Parliament to reevaluate its political leaning based on the EUandI questionnaire. Llama Chat shows considerable knowledge of national parties' positions and is capable of reasoning in context. The adapted, party-specific, models are substantially re-aligned towards respective positions which we see as a starting point for using chat-based LLMs as data-driven conversational engines to assist research in political science.

We present a two-stage text-to-3D generation system, namely 3DTopia, which generates high-quality general 3D assets within 5 minutes using hybrid diffusion priors. The first stage samples from a 3D diffusion prior directly learned from 3D data. Specifically, it is powered by a text-conditioned tri-plane latent diffusion model, which quickly generates coarse 3D samples for fast prototyping. The second stage utilizes 2D diffusion priors to further refine the texture of coarse 3D models from the first stage. The refinement consists of both latent and pixel space optimization for high-quality texture generation. To facilitate the training of the proposed system, we clean and caption the largest open-source 3D dataset, Objaverse, by combining the power of vision language models and large language models. Experiment results are reported qualitatively and quantitatively to show the performance of the proposed system. Our codes and models are available at https://github.com/3DTopia/3DTopia

This study investigates the use of generative AI and multi-agent systems to provide automatic feedback in educational contexts, particularly for student constructed responses in science assessments. The research addresses a key gap in the field by exploring how multi-agent systems, called AutoFeedback, can improve the quality of GenAI-generated feedback, overcoming known issues such as over-praise and over-inference that are common in single-agent large language models (LLMs). The study developed a multi-agent system consisting of two AI agents: one for generating feedback and another for validating and refining it. The system was tested on a dataset of 240 student responses, and its performance was compared to that of a single-agent LLM. Results showed that AutoFeedback significantly reduced the occurrence of over-praise and over-inference errors, providing more accurate and pedagogically sound feedback. The findings suggest that multi-agent systems can offer a more reliable solution for generating automated feedback in educational settings, highlighting their potential for scalable and personalized learning support. These results have important implications for educators and researchers seeking to leverage AI in formative assessments, offering a pathway to more effective feedback mechanisms that enhance student learning outcomes.

Large language models (LLMs) hold great promise for assisting clinical interviews due to their fluent interactive capabilities and extensive medical knowledge. However, the lack of high-quality interview dialogue data and widely accepted evaluation methods has significantly impeded this process. So we propose CliniChat, a framework that integrates multi-source knowledge to enable LLMs to simulate real-world clinical interviews. It consists of two modules: Clini-Recon and Clini-Eval, each responsible for reconstructing and evaluating interview dialogues, respectively. By incorporating three sources of knowledge, Clini-Recon transforms clinical notes into systematic, professional, and empathetic interview dialogues. Clini-Eval combines a comprehensive evaluation metric system with a two-phase automatic evaluation approach, enabling LLMs to assess interview performance like experts. We contribute MedQA-Dialog, a high-quality synthetic interview dialogue dataset, and CliniChatGLM, a model specialized for clinical interviews. Experimental results demonstrate that CliniChatGLM's interview capabilities undergo a comprehensive upgrade, particularly in history-taking, achieving state-of-the-art performance.

Polarization imaging captures the polarization state of light, revealing information invisible to the human eye yet valuable in domains such as biomedical diagnostics, autonomous driving, and remote sensing. However, conventional polarization cameras are often expensive, bulky, or both, limiting their practical use. Lensless imaging offers a compact, low-cost alternative by replacing the lens with a simple optical element like a diffuser and performing computational reconstruction, but existing lensless polarization systems suffer from limited reconstruction quality. To overcome these limitations, we introduce a RGB-guided lensless polarization imaging system that combines a compact polarization-RGB sensor with an auxiliary, widely available conventional RGB camera providing structural guidance. We reconstruct multi-angle polarization images for each RGB color channel through a two-stage pipeline: a physics-based inversion recovers an initial polarization image, followed by a Transformer-based fusion network that refines this reconstruction using the RGB guidance image from the conventional RGB camera. Our two-stage method significantly improves reconstruction quality and fidelity over lensless-only baselines, generalizes across datasets and imaging conditions, and achieves high-quality real-world results on our physical prototype lensless camera without any fine-tuning.

We explore the possibility to use physics-informed neural networks to drastically accelerate the solution of ordinary differential-algebraic equations that govern the power system dynamics. When it comes to transient stability assessment, the traditionally applied methods either carry a significant computational burden, require model simplifications, or use overly conservative surrogate models. Conventional neural networks can circumvent these limitations but are faced with high demand of high-quality training datasets, while they ignore the underlying governing equations. Physics-informed neural networks are different: they incorporate the power system differential algebraic equations directly into the neural network training and drastically reduce the need for training data. This paper takes a deep dive into the performance of physics-informed neural networks for power system transient stability assessment. Introducing a new neural network training procedure to facilitate a thorough comparison, we explore how physics-informed neural networks compare with conventional differential-algebraic solvers and classical neural networks in terms of computation time, requirements in data, and prediction accuracy. We illustrate the findings on the Kundur two-area system, and assess the opportunities and challenges of physics-informed neural networks to serve as a transient stability analysis tool, highlighting possible pathways to further develop this method.

TFDWT is an open-source Python library that allows the construction of TensorFlow Layers for Fast Discrete Wavelet Transform (DWT) and Inverse Discrete Wavelet Transform (IDWT) in end-to-end backpropagation learning networks. By definition, a multiresolution signal representation using a multi-rate discrete wavelet system creates enriched joint natural-frequency representations. These layers facilitate the construction of multilevel DWT filter banks and Wavelet Packet Transform (WPT) filter banks for a spatial-frequency representation of the inputs and features in shallow or deep networks. The discrete wavelet system partitions the frequency plane into subbands using orthogonal dilated and translated lowpass scaling and highpass wavelet function. The realization of a fast discrete wavelet system is a two-band perfect reconstruction multi-rate filter bank with FIR filters corresponding to the impulse responses of the scaling and wavelet function with downsampling and upsampling operations. A filter bank for a higher dimensional input is a seamless extension by successive separable circular convolutions across each independent axis. The command `pip install TFDWT' installs the latest version of the package.

This report presents a unified technical system addressing the two core capabilities of world models for autonomous driving: world representation and world generation. For world representation, we propose WorldRec, a feed-forward reconstruction architecture driven by sparse scene queries. WorldRec initializes structured queries in 3D space, leveraging them to aggregate cross-view, cross-temporal features, thereby naturally enforcing spatial consistency across frames and yielding compact yet high-fidelity 3D Gaussian scene representations. For world generation, we propose WorldGen, a two-stage training framework of bidirectional pretraining followed by causal fine-tuning through three progressive stages (Teacher Forcing, ODE distillation, and DMD), enabling high-quality online causal video generation in as few as 4 denoising steps. Building on both modules, we further introduce the JWM, which deeply integrates WorldRec and WorldGen to achieve synergistic gains in generation stability, cross-frame consistency, and visual fidelity, providing a solid foundation for closed-loop simulation, data synthesis, and end-to-end training in autonomous driving.

Scientific question answering requires a retrieval system to solve two distinct problems: identifying which papers are relevant and locating the supporting evidence within those papers. Conventional retrieval-augmented generation typically addresses both through similarity search over fixed-length passages, flattening document structure and separating scientific claims from their methodological and argumentative context. We present VecTree-RAG, an agentic framework that assigns these tasks to complementary retrieval mechanisms. Vector search ranks compact document and section representations across the corpus, whereas reasoning-guided traversal of source-verified section trees localizes evidence within shortlisted papers. Full text is retained in a page store and exposed progressively only after structural localization. We evaluate VecTree-RAG on 300 QASPER questions, an open-access subset of 54 LitQA2 questions, and 49 multi-document MOSAIC questions. Compared with Dense RAG, reranked Dense RAG, RAPTOR, and Search-o1, VecTree-RAG obtained the highest observed answer score on all three benchmarks, reaching 0.800 LLM-judge correctness on QASPER, 0.925 accuracy on LitQA2, and a 0.547 composite score on MOSAIC. On QASPER, its evidence-page precision was 0.274, compared with 0.046--0.071 for the baselines. LitQA2 ablations further showed that the complete vector--tree architecture required fewer inference tokens than variants without tree navigation or corpus-level vector routing. These results indicate that vector retrieval narrows the corpus-level search space and tree navigation concentrates reading on structurally relevant evidence. Although multi-turn inference remains more expensive than single-call retrieval, VecTree-RAG provides a structure-aware and traceable architecture for scientific literature question answering.

In this paper, we propose a novel end-to-end relightable neural inverse rendering system that achieves high-quality reconstruction of geometry and material properties, thus enabling high-quality relighting. The cornerstone of our method is a two-stage approach for learning a better factorization of scene parameters. In the first stage, we develop a reflection-aware radiance field using a neural signed distance field (SDF) as the geometry representation and deploy an MLP (multilayer perceptron) to estimate indirect illumination. In the second stage, we introduce a novel information-sharing network structure to jointly learn the radiance field and the physically based factorization of the scene. For the physically based factorization, to reduce the noise caused by Monte Carlo sampling, we apply a split-sum approximation with a simplified Disney BRDF and cube mipmap as the environment light representation. In the relighting phase, to enhance the quality of indirect illumination, we propose a second split-sum algorithm to trace secondary rays under the split-sum rendering framework. Furthermore, there is no dataset or protocol available to quantitatively evaluate the inverse rendering performance for glossy objects. To assess the quality of material reconstruction and relighting, we have created a new dataset with ground truth BRDF parameters and relighting results. Our experiments demonstrate that our algorithm achieves state-of-the-art performance in inverse rendering and relighting, with particularly strong results in the reconstruction of highly reflective objects.

External tools help large language models succeed at tasks where they would otherwise typically fail. In existing frameworks, choosing tools at test time relies on naive greedy decoding, regardless of whether the model has been fine-tuned on tool-annotated data or prompted with in-context examples. In contrast, we find that gathering and choosing among a suitable set of candidate tools has greater potential to lead to an optimal selection. We present Tool selECTion via meta-reasONing (TECTON), a two-phase system that first reasons over a task and outputs candidate tools using a custom fine-tuned language modelling head. Then, with the custom head disabled, it meta-reasons (i.e., it reasons over the previous reasoning process) to make a final choice. We show that TECTON results in substantial gains--both in-distribution and out-of-distribution--on a range of math reasoning datasets.

Studies on the Named Entity Recognition (NER) task have shown outstanding results that reach human parity on input texts with correct text formattings, such as with proper punctuation and capitalization. However, such conditions are not available in applications where the input is speech, because the text is generated from a speech recognition system (ASR), and that the system does not consider the text formatting. In this paper, we (1) presented the first Vietnamese speech dataset for NER task, and (2) the first pre-trained public large-scale monolingual language model for Vietnamese that achieved the new state-of-the-art for the Vietnamese NER task by 1.3% absolute F1 score comparing to the latest study. And finally, (3) we proposed a new pipeline for NER task from speech that overcomes the text formatting problem by introducing a text capitalization and punctuation recovery model (CaPu) into the pipeline. The model takes input text from an ASR system and performs two tasks at the same time, producing proper text formatting that helps to improve NER performance. Experimental results indicated that the CaPu model helps to improve by nearly 4% of F1-score.

We identify five selected open problems in the theory of quantum information, which are rather simple to formulate, were well-studied in the literature, but are technically not easy. As these problems enjoy diverse mathematical connections, they offer a huge breakthrough potential. The first four concern existence of certain objects relevant for quantum information, namely a family of symmetric informationally complete generalized measurements in an infinite sequence of dimensions, mutually unbiased bases in dimension six, absolutely maximally entangled states for four subsystems with six levels each and bound entangled states with negative partial transpose. The fifth problem requires checking whether a certain state of a two-ququart system is 2-copy distillable. An award for solving each of them is announced.

Existing large language model (LLM) serving systems fall into two categories: 1) a unified system where prefill phase and decode phase are co-located on the same GPU, sharing the unified computational resource and storage, and 2) a disaggregated system where the two phases are disaggregated to different GPUs. The design of the disaggregated system addresses the latency interference and sophisticated scheduling issues in the unified system but leads to storage challenges including 1) replicated weights for both phases that prevent flexible deployment, 2) KV cache transfer overhead between the two phases, 3) storage imbalance that causes substantial wasted space of the GPU capacity, and 4) suboptimal resource adjustment arising from the difficulties in migrating KV cache. Such storage inefficiency delivers poor serving performance under high request rates. In this paper, we identify that the advantage of the disaggregated system lies in the disaggregated computation, i.e., partitioning the computational resource to enable the asynchronous computation of two phases. Thus, we propose a novel LLM serving system, semi-PD, characterized by disaggregated computation and unified storage. In semi-PD, we introduce a computation resource controller to achieve disaggregated computation at the streaming multi-processor (SM) level, and a unified memory manager to manage the asynchronous memory access from both phases. semi-PD has a low-overhead resource adjustment mechanism between the two phases, and a service-level objective (SLO) aware dynamic partitioning algorithm to optimize the SLO attainment. Compared to state-of-the-art systems, semi-PD maintains lower latency at higher request rates, reducing the average end-to-end latency per request by 1.27-2.58x on DeepSeek series models, and serves 1.55-1.72x more requests adhering to latency constraints on Llama series models.

This paper introduces CoBRA, a novel toolkit for systematically specifying agent behavior in LLM-based social simulation. We found that conventional approaches that specify agent behavior through implicit natural-language descriptions often do not yield consistent behavior across models, and the resulting behavior does not capture the nuances of the descriptions. In contrast, CoBRA introduces a model-agnostic way to control agent behavior that lets researchers explicitly specify desired nuances and obtain consistent behavior across models. At the heart of CoBRA is a novel closed-loop system primitive with two components: (1) Cognitive Bias Index that measures the demonstrated cognitive bias of a social agent, by quantifying the agent's reactions in a set of validated classic social science experiments; (2) Behavioral Regulation Engine that aligns the agent's behavior to exhibit controlled cognitive bias. Through CoBRA, we show how to operationalize validated social science knowledge (i.e., classical experiments) as reusable "gym" environments for AI -- an approach that may generalize to richer social and affective simulations beyond bias alone.

In 3D Visual Question Answering (3D VQA), the scarcity of fully annotated data and limited visual content diversity hampers the generalization to novel scenes and 3D concepts (e.g., only around 800 scenes are utilized in ScanQA and SQA dataset). Current approaches resort supplement 3D reasoning with 2D information. However, these methods face challenges: either they use top-down 2D views that introduce overly complex and sometimes question-irrelevant visual clues, or they rely on globally aggregated scene/image-level representations from 2D VLMs, losing the fine-grained vision-language correlations. To overcome these limitations, our approach utilizes question-conditional 2D view selection procedure, pinpointing semantically relevant 2D inputs for crucial visual clues. We then integrate this 2D knowledge into the 3D-VQA system via a two-branch Transformer structure. This structure, featuring a Twin-Transformer design, compactly combines 2D and 3D modalities and captures fine-grained correlations between modalities, allowing them mutually augmenting each other. Integrating proposed mechanisms above, we present BridgeQA, that offers a fresh perspective on multi-modal transformer-based architectures for 3D-VQA. Experiments validate that BridgeQA achieves state-of-the-art on 3D-VQA datasets and significantly outperforms existing solutions. Code is available at https://github.com/matthewdm0816/BridgeQA{this URL}.

We present a multimodal dataset of 1020 hours of simultaneously recorded scalp electroencephalography (EEG), facial electromyography (EMG), and speech audio from three healthy native Japanese speakers during open-vocabulary overt speech. Recordings were acquired with three EEG systems-an ultra-high-density system (g.Pangolin) and two cap-type systems (g.SCARABEO and eegosports), spanning 62-128 channels-across many sessions over several months. Each session provides time-synchronized EEG, facial EMG, and audio, together with speech-event annotations and transcriptions. Although collected with speech decoding as a primary motivation, the dataset also supports work on multimodal signal processing, artifact modeling, longitudinal and cross-device adaptation, and EEG representation learning. Technical validation included power spectral density and event-related potential analyses across participants, devices, and tasks, which showed the expected 1/f spectral profile, task-related alpha-band attenuation, and time-locked evoked responses. The dataset is released in Brain Imaging Data Structure (BIDS) format via OpenNeuro under a CC0 waiver to support both speech-related and broader EEG research.

Autonomous research systems are increasingly capable of executing long research workflows, yet automation alone does not ensure that the resulting process remains scientifically grounded. We introduce AutoResearch, a two-stage system that connects Idea Generation with Idea Execution to address both how research ideas are formed and how they are reliably established through experimentation. In Idea Generation, AutoResearch continuously integrates emerging research signals with accumulated domain knowledge, identifies transferable mechanistic insights, and uses multi-model generation and cross-review to produce grounded, testable research plans. In Idea Execution, coordinated agents decompose these plans into experiments, iteratively implement and diagnose them, and employ independent evidence-based review before accepting research conclusions. Across representative settings in cross-modal retrieval, systems optimization, and benchmark-driven machine learning, AutoResearch turns generated ideas into measurable progress, detects and corrects unreliable experimental results, and makes evidence-conditioned decisions to continue, revise, or terminate research directions. For example, on RSICD benchmark, an AutoResearch-generated idea improves mean Recall from 32.84 to 34.69, while recording only 5 audit-confirmed issue events compared with 11-27 for other autonomous research systems. These results demonstrate a research process in which meaningful insight is grounded before experimentation and conclusions are grounded before acceptance: Insight In, Hallucination Out.

In neural text-to-speech (TTS), two-stage system or a cascade of separately learned models have shown synthesis quality close to human speech. For example, FastSpeech2 transforms an input text to a mel-spectrogram and then HiFi-GAN generates a raw waveform from a mel-spectogram where they are called an acoustic feature generator and a neural vocoder respectively. However, their training pipeline is somewhat cumbersome in that it requires a fine-tuning and an accurate speech-text alignment for optimal performance. In this work, we present end-to-end text-to-speech (E2E-TTS) model which has a simplified training pipeline and outperforms a cascade of separately learned models. Specifically, our proposed model is jointly trained FastSpeech2 and HiFi-GAN with an alignment module. Since there is no acoustic feature mismatch between training and inference, it does not requires fine-tuning. Furthermore, we remove dependency on an external speech-text alignment tool by adopting an alignment learning objective in our joint training framework. Experiments on LJSpeech corpus shows that the proposed model outperforms publicly available, state-of-the-art implementations of ESPNet2-TTS on subjective evaluation (MOS) and some objective evaluations.

We introduce a practical robotics solution for the task of heterogeneous bagging, requiring the placement of multiple rigid and deformable objects into a deformable bag. This is a difficult task as it features complex interactions between multiple highly deformable objects under limited observability. To tackle these challenges, we propose a robotic system consisting of two learned policies: a rearrangement policy that learns to place multiple rigid objects and fold deformable objects in order to achieve desirable pre-bagging conditions, and a lifting policy to infer suitable grasp points for bi-manual bag lifting. We evaluate these learned policies on a real-world three-arm robot platform that achieves a 70% heterogeneous bagging success rate with novel objects. To facilitate future research and comparison, we also develop a novel heterogeneous bagging simulation benchmark that will be made publicly available.

This work proposes FireRedTTS, a foundation text-to-speech framework, to meet the growing demands for personalized and diverse generative speech applications. The framework comprises three parts: data processing, foundation system, and downstream applications. First, we comprehensively present our data processing pipeline, which transforms massive raw audio into a large-scale high-quality TTS dataset with rich annotations and a wide coverage of content, speaking style, and timbre. Then, we propose a language-model-based foundation TTS system. The speech signal is compressed into discrete semantic tokens via a semantic-aware speech tokenizer, and can be generated by a language model from the prompt text and audio. Then, a two-stage waveform generator is proposed to decode them to the high-fidelity waveform. We present two applications of this system: voice cloning for dubbing and human-like speech generation for chatbots. The experimental results demonstrate the solid in-context learning capability of FireRedTTS, which can stably synthesize high-quality speech consistent with the prompt text and audio. For dubbing, FireRedTTS can clone target voices in a zero-shot way for the UGC scenario and adapt to studio-level expressive voice characters in the PUGC scenario via few-shot fine-tuning with 1-hour recording. Moreover, FireRedTTS achieves controllable human-like speech generation in a casual style with paralinguistic behaviors and emotions via instruction tuning, to better serve spoken chatbots.

Tool-integrated reasoning has emerged as a key focus for enabling agentic applications. Among these, DeepResearch Agents have gained significant attention for their strong performance on complex, open-ended information-seeking tasks. We introduce Fathom-DeepResearch, an agentic system composed of two specialized models. The first is Fathom-Search-4B, a DeepSearch model trained from Qwen3-4B and optimized for evidence-based investigation through live web search and targeted webpage querying. Its training combines three advances: (i) DUETQA, a 5K-sample dataset generated via multi-agent self-play that enforces strict web-search dependence and heterogeneous source grounding; (ii) RAPO, a zero-overhead extension of GRPO that stabilizes multi-turn Reinforcement Learning with Verifiable Rewards through curriculum pruning, reward-aware advantage scaling, and per-prompt replay buffers; and (iii) a steerable step-level reward that classifies each tool call by cognitive behavior and marginal utility, enabling explicit control over search trajectory breadth, depth, and horizon. These improvements enable reliable extension of tool-calling beyond 20 calls when warranted. The second is Fathom-Synthesizer-4B, trained from Qwen3-4B, which converts multi-turn DeepSearch traces into structured, citation-dense DeepResearch Reports for comprehensive synthesis. Evaluated on DeepSearch benchmarks (SimpleQA, FRAMES, WebWalker, Seal0, MuSiQue) and DeepResearch-Bench, the system achieves state-of-the-art performance in the open-weights category while demonstrating strong generalization to diverse reasoning tasks including HLE, AIME-25, GPQA-Diamond, and MedQA.

The goal of Airbnb search is to match guests with the ideal accommodation that fits their travel needs. This is a challenging problem, as popular search locations can have around a hundred thousand available homes, and guests themselves have a wide variety of preferences. Furthermore, the launch of new product features, such as flexible date search, significantly increased the number of eligible homes per search query. As such, there is a need for a sophisticated retrieval system which can provide high-quality candidates with low latency in a way that integrates with the overall ranking stack. This paper details our journey to build an efficient and high-quality retrieval system for Airbnb search. We describe the key unique challenges we encountered when implementing an Embedding-Based Retrieval (EBR) system for a two sided marketplace like Airbnb -- such as the dynamic nature of the inventory, a lengthy user funnel with multiple stages, and a variety of product surfaces. We cover unique insights when modeling the retrieval problem, how to build robust evaluation systems, and design choices for online serving. The EBR system was launched to production and powers several use-cases such as regular search, flexible date and promotional emails for marketing campaigns. The system demonstrated statistically-significant improvements in key metrics, such as booking conversion, via A/B testing.

Document extraction is an important step before retrieval-augmented generation (RAG), knowledge bases, and downstream generative AI can work. It turns unstructured documents like PDFs and scans into structured text and layout-aware representations. We introduce NovaLAD, a comprehensive document parsing system that integrates two concurrent YOLO object detection models - element detection and layout detection - with rule-based grouping and optional vision-language enhancement. When a page image is sent in, the first thing that happens is that it goes through both models at the same time. The element model finds semantic content like the title, header, text, table, image, and so on, and the layout model finds structural regions like layout_box, column_group, multi_column, row_group, and so on. A key design decision is to first send an image or figure through an image classifier (ViT) that decides whether it is relevant or not. Only useful images are then submitted to the Vision LLM for title, summary, and structured information, which cuts down on noise and costs. NovaLAD is built for speed: it works on CPU, employs parallel execution for detection, classification, OCR, and conversion, and generates several forms, including structured JSON, Markdown, RAG-ready texts, and knowledge graphs. We test on the DP-Bench benchmark (upstage/dp-bench) and get 96.49% TEDS and 98.51% NID, which is better than both commercial and open-source parsers. This paper explains how to extract data, how the architecture works, how data flows, and how to make NovaLAD both accurate and usable without needing a GPU.

Storyboarding is a core skill in visual storytelling for film, animation, and games. However, automating this process requires a system to achieve two properties that current approaches rarely satisfy simultaneously: inter-shot consistency and explicit editability. While 2D diffusion-based generators produce vivid imagery, they often suffer from identity drift along with limited geometric control; conversely, traditional 3D animation workflows are consistent and editable but require expert-heavy, labor-intensive authoring. We present StoryBlender, a grounded 3D storyboard generation framework governed by a Story-centric Reflection Scheme. At its core, we propose the StoryBlender system, which is built on a three-stage pipeline: (1) Semantic-Spatial Grounding, to construct a continuity memory graph to decouple global assets from shot-specific variables for long-horizon consistency; (2) Canonical Asset Materialization, to instantiate entities in a unified coordinate space to maintain visual identity; and (3) Spatial-Temporal Dynamics, to achieve layout design and cinematic evolution through visual metrics. By orchestrating multiple agents in a hierarchical manner within a verification loop, StoryBlender iteratively self-corrects spatial hallucinations via engine-verified feedback. The resulting native 3D scenes support direct, precise editing of cameras and visual assets while preserving unwavering multi-shot continuity. Experiments demonstrate that StoryBlender significantly improves consistency and editability over both diffusion-based and 3D-grounded baselines. Code, data, and demonstration video will be available on https://engineeringai-lab.github.io/StoryBlender/

As LLM-based agents increasingly operate in multi-agent systems, understanding adversarial manipulation becomes critical for defensive design. We present a systematic study of intentional deception as an engineered capability, using LLM-to-LLM interactions within a text-based RPG where parameterized behavioral profiles (9 alignments x 4 motivations, yielding 36 profiles with explicit ethical ground truth) serve as our experimental testbed. Unlike accidental deception from misalignment, we investigate a two-stage system that infers target agent characteristics and generates deceptive responses steering targets toward actions counter to their beliefs and motivations. We find that deceptive intervention produces differential effects concentrated in specific behavioral profiles rather than distributed uniformly, and that 88.5% of successful deceptions employ misdirection (true statements with strategic framing) rather than fabrication, indicating fact-checking defenses would miss the large majority of adversarial responses. Motivation, inferable at 98%+ accuracy, serves as the primary attack vector, while belief systems remain harder to identify (49% inference ceiling) or exploit. These findings identify which agent profiles require additional safeguards and suggest that current fact-verification approaches are insufficient against strategically framed deception.

We introduce a novel class of sample-based explanations we term high-dimensional representers, that can be used to explain the predictions of a regularized high-dimensional model in terms of importance weights for each of the training samples. Our workhorse is a novel representer theorem for general regularized high-dimensional models, which decomposes the model prediction in terms of contributions from each of the training samples: with positive (negative) values corresponding to positive (negative) impact training samples to the model's prediction. We derive consequences for the canonical instances of ell_1 regularized sparse models, and nuclear norm regularized low-rank models. As a case study, we further investigate the application of low-rank models in the context of collaborative filtering, where we instantiate high-dimensional representers for specific popular classes of models. Finally, we study the empirical performance of our proposed methods on three real-world binary classification datasets and two recommender system datasets. We also showcase the utility of high-dimensional representers in explaining model recommendations.

We revisit quantum phase estimation algorithms for the purpose of obtaining the energy levels of many-body Hamiltonians and pay particular attention to the statistical analysis of their outputs. We introduce the mean phase direction of the parent distribution associated with eigenstate inputs as a new post-processing tool. By connecting it with the unknown phase, we find that if used as its direct estimator, it exceeds the accuracy of the standard majority rule using one less bit of resolution, making evident that it can also be inverted to provide unbiased estimation. Moreover, we show how to directly use this quantity to accurately find the energy levels when the initialized state is an eigenstate of the simulated propagator during the whole time evolution, which allows for shallower algorithms. We then use IBM Q hardware to carry out the digital quantum simulation of three toy models: a two-level system, a two-spin Ising model and a two-site Hubbard model at half-filling. Methodologies are provided to implement Trotterization and reduce the variability of results in noisy intermediate scale quantum computers.

In this paper, we study how to synthesize a dynamic reference from an external dictionary to perform conditional coding of the input image in the latent domain and how to learn the conditional latent synthesis and coding modules in an end-to-end manner. Our approach begins by constructing a universal image feature dictionary using a multi-stage approach involving modified spatial pyramid pooling, dimension reduction, and multi-scale feature clustering. For each input image, we learn to synthesize a conditioning latent by selecting and synthesizing relevant features from the dictionary, which significantly enhances the model's capability in capturing and exploring image source correlation. This conditional latent synthesis involves a correlation-based feature matching and alignment strategy, comprising a Conditional Latent Matching (CLM) module and a Conditional Latent Synthesis (CLS) module. The synthesized latent is then used to guide the encoding process, allowing for more efficient compression by exploiting the correlation between the input image and the reference dictionary. According to our theoretical analysis, the proposed conditional latent coding (CLC) method is robust to perturbations in the external dictionary samples and the selected conditioning latent, with an error bound that scales logarithmically with the dictionary size, ensuring stability even with large and diverse dictionaries. Experimental results on benchmark datasets show that our new method improves the coding performance by a large margin (up to 1.2 dB) with a very small overhead of approximately 0.5\% bits per pixel. Our code is publicly available at https://github.com/ydchen0806/CLC.