Daily Papers

Layer-aligned distillation and convergence-based early exit represent two predominant computational efficiency paradigms for transformer inference; yet we establish that they exhibit systematic incompatibility under standard deployment conditions for convergence-based early exit. Distillation objectives that align intermediate student layers to teacher representations suppress the representational convergence that early-exit mechanisms exploit, rendering such mechanisms ineffective on distilled models. We introduce LEAP (Layer-wise Exit-Aware Pretraining), an auxiliary training objective that reconciles this incompatibility. LEAP requires no architectural modifications; it augments standard distillation with a single constraint ensuring intermediate layers approximate final-layer representations. LEAP-MiniLM achieves 1.61times measured wall-clock speedup (batch=1, NVIDIA L4) at θ=0.95, with 91.9% of samples exiting by layer 7 and 1.80times theoretical layer reduction, where standard distilled models achieve zero effective speedup. We validate across sentence similarity (STS-B: 0.760 pm 0.006) and retrieval benchmarks (BEIR), providing operational guidance including latency measurements, decision thresholds, and deployment criteria.

Vision-Language-Action (VLA) models aim to provide a single generalist controller for robots, but today's systems fall short on the criteria that matter for real-world deployment. Frontier models are closed, open-weight alternatives are tied to expensive hardware, reasoning-augmented policies pay prohibitive latency for their grounding, and fine-tuned success rates remain below the threshold for dependable use. We present MolmoAct2, a fully open action reasoning model built for practical deployment, advancing its predecessor along five axes. We introduce MolmoER, a VLM backbone specialized for spatial and embodied reasoning, trained on a 3.3M-sample corpus with a specialize-then-rehearse recipe. We release three new datasets spanning low-to-medium cost platforms, including MolmoAct2-BimanualYAM, 720 hours of teleoperated bimanual trajectories that constitute the largest open bimanual dataset to date, together with quality-filtered Franka (DROID) and SO100/101 subsets. We provide OpenFAST, an open-weight, open-data action tokenizer trained on millions of trajectories across five embodiments. We redesign the architecture to graft a flow-matching continuous-action expert onto a discrete-token VLM via per-layer KV-cache conditioning. Finally, we propose MolmoThink, an adaptive-depth reasoning variant that re-predicts depth tokens only for scene regions that change between timesteps, retaining geometric grounding at a fraction of prior latency. In the most extensive empirical study of any open VLA to date, spanning 7 simulation and real-world benchmarks, MolmoAct2 outperforms strong baselines including Pi-05, while MolmoER surpasses GPT-5 and Gemini Robotics ER-1.5 across 13 embodied-reasoning benchmarks. We release model weights, training code, and complete training data. Project page: https://allenai.org/blog/molmoact2

Aligning multimodal generative models with human preferences demands reward signals that respect the compositional, multi-dimensional structure of human judgment. Prevailing RLHF approaches reduce this structure to scalar or pairwise labels, collapsing nuanced preferences into opaque parametric proxies and exposing vulnerabilities to reward hacking. While recent Rubrics-as-Reward (RaR) methods attempt to recover this structure through explicit criteria, generating rubrics that are simultaneously reliable, scalable, and data-efficient remains an open problem. We introduce Auto-Rubric as Reward (ARR), a framework that reframes reward modeling from implicit weight optimization to explicit, criteria-based decomposition. Before any pairwise comparison, ARR externalizes a VLM's internalized preference knowledge as prompt-specific rubrics, translating holistic intent into independently verifiable quality dimensions. This conversion of implicit preference structure into inspectable, interpretable constraints substantially suppresses evaluation biases including positional bias, enabling both zero-shot deployment and few-shot conditioning on minimal supervision. To extend these gains into generative training, we propose Rubric Policy Optimization (RPO), which distills ARR's structured multi-dimensional evaluation into a robust binary reward, replacing opaque scalar regression with rubric-conditioned preference decisions that stabilize policy gradients. On text-to-image generation and image editing benchmarks, ARR-RPO outperforms pairwise reward models and VLM judges, demonstrating that explicitly externalizing implicit preference knowledge into structured rubrics achieves more reliable, data-efficient multimodal alignment, revealing that the bottleneck is the absence of a factorized interface, not a deficit of knowledge.

Safety alignment mechanisms in large language models prevent responses to harmful queries through learned refusal behavior, yet these same mechanisms impede legitimate research applications including cognitive modeling, adversarial testing, and security analysis. While abliteration techniques enable surgical removal of refusal representations through directional orthogonalization, the relative effectiveness of available implementations remains uncharacterized. This study evaluates four abliteration tools (Heretic, DECCP, ErisForge, FailSpy) across sixteen instruction-tuned models (7B-14B parameters), reporting tool compatibility on all 16 models and quantitative metrics on subsets dictated by tool support. Single-pass methods demonstrated superior capability preservation on the benchmarked subset (avg GSM8K change across three models: ErisForge -0.28 pp; DECCP -0.13 pp), while Bayesian-optimized abliteration produced variable distribution shift (KL divergence: 0.043-1.646) with model-dependent capability impact. These findings provide researchers with evidence-based selection criteria for abliteration tool deployment across diverse model architectures. The principal finding indicates that mathematical reasoning capabilities exhibit the highest sensitivity to abliteration interventions, with GSM8K change ranging from +1.51 pp to -18.81 pp (-26.5% relative) depending on tool selection and model architecture.

Deploying Large Language Model-based agents (LLM agents) in the public sector requires assuring that they meet the stringent legal, procedural, and structural requirements of public-sector institutions. Practitioners and researchers often turn to benchmarks for such assessments. However, it remains unclear what criteria benchmarks must meet to ensure they adequately reflect public-sector requirements, or how many existing benchmarks do so. In this paper, we first define such criteria based on a first-principles survey of public administration literature: benchmarks must be process-based, realistic, public-sector-specific and report metrics that reflect the unique requirements of the public sector. We analyse more than 1,300 benchmark papers for these criteria using an expert-validated LLM-assisted pipeline. Our results show that no single benchmark meets all of the criteria. Our findings provide a call to action for both researchers to develop public sector-relevant benchmarks and for public-sector officials to apply these criteria when evaluating their own agentic use cases.

Mixture-of-Experts (MoE) language models reduce per-token computation through sparse expert activation, yet deployment still requires storing the full expert pool, making one-shot expert pruning a practical approach for reducing memory usage. Although effective, existing criteria are largely heuristic, and no single criterion is universally optimal. Thus, establishing a principle for selecting pruning criteria suited to different deployment objectives remains an important yet largely underexplored problem in one-shot expert pruning. To this end, we introduce a unified formulation for one-shot MoE expert pruning organized around three factors: routing frequency, gate weighting, and activation strength. The formulation yields a criteria selection principle: task-agnostic pruning should favor routed-token-averaged, gate-free activation-based criteria, whereas task-specific pruning can benefit from retaining routing-frequency and gate-weight information. Beyond this principle, the formulation also provides a systematic view of existing heuristic criteria and gives rise to two new task-agnostic criteria, Mean Activation Norm (MAN) and Mean Squared Activation Norm (MSAN). Across four representative MoE models and 16 diverse benchmarks, MAN and MSAN are consistently strong in the task-agnostic setting, obtain the top-two average ranks, and improve average performance by up to 8.8 points over the strongest baseline.

Agent benchmarks are growing fast, but no single benchmark touches more than four or five of the dimensions that deployment exposes. This paper aggregates the largest coordinated deep-dive of one MCP-based industrial-agent benchmark to date: fourteen parallel implementation studies covering new asset classes (including a multi-modal visual extension), alternative orchestrations, retrieval strategies, reasoning modes, infrastructure optimizations, and evaluation-methodology probes. Consolidating those studies with seven prior agent benchmarks, we argue that aggregate-score leaderboards systematically underspecify deployed-agent evaluation. Rankings derived from aggregate scores do not transfer to out-of-distribution settings; recent public-to-hidden competition retrospectives provide direct empirical evidence of this rank instability. We propose ranking configurations by predictive validity, the correlation between in-sample and out-of-sample rank, rather than in-sample mean, and report a twelve-tier measurement apparatus that exposes the deployment-relevant dimensions HELM and its agent-era successors collapse. The position is operationalized through three falsifiable out-of-distribution criteria with explicit thresholds; existing evidence partly supports it but is too thin to confirm. We close with a pre-registered pilot design and a field-level vision for what the next generation of agentic benchmarks should report.

Automatic evaluation with large language models, commonly known as LLM-as-a-judge, is now standard across reasoning and alignment tasks. Despite evaluating many samples in deployment, these evaluators typically (i) treat each case independently, missing the opportunity to accumulate experience, and (ii) rely on a single fixed prompt for all cases, neglecting the need for sample-specific evaluation criteria. We introduce Learning While Evaluating (LWE), a framework that allows evaluators to improve sequentially at inference time without requiring training or validation sets. LWE maintains an evolving meta-prompt that (i) produces sample-specific evaluation instructions and (ii) refines itself through self-generated feedback. Furthermore, we propose Selective LWE, which updates the meta-prompt only on self-inconsistent cases, focusing computation where it matters most. This selective approach retains the benefits of sequential learning while being far more cost-effective. Across two pairwise comparison benchmarks, Selective LWE outperforms strong baselines, empirically demonstrating that evaluators can improve during sequential testing with a simple selective update, learning most from the cases they struggle with.

As the performance of large language models (LLMs) continues to advance, their adoption is expanding across a wide range of domains, including the medical field. The integration of LLMs into medical applications raises critical safety concerns, particularly due to their use by users with diverse roles, e.g. patients and clinicians, and the potential for model's outputs to directly affect human health. Despite the domain-specific capabilities of medical LLMs, prior safety evaluations have largely focused only on general safety benchmarks. In this paper, we introduce a safety evaluation protocol tailored to the medical domain in both patient user and clinician user perspectives, alongside general safety assessments and quantitatively analyze the safety of medical LLMs. We bridge a gap in the literature by building the PatientSafetyBench containing 466 samples over 5 critical categories to measure safety from the perspective of the patient. We apply our red-teaming protocols on the MediPhi model collection as a case study. To our knowledge, this is the first work to define safety evaluation criteria for medical LLMs through targeted red-teaming taking three different points of view - patient, clinician, and general user - establishing a foundation for safer deployment in medical domains.

Indirect User Requests (IURs), such as "It's cold in here" instead of "Could you please increase the temperature?" are common in human-human task-oriented dialogue and require world knowledge and pragmatic reasoning from the listener. While large language models (LLMs) can handle these requests effectively, smaller models deployed on virtual assistants often struggle due to resource constraints. Moreover, existing task-oriented dialogue benchmarks lack sufficient examples of complex discourse phenomena such as indirectness. To address this, we propose a set of linguistic criteria along with an LLM-based pipeline for generating realistic IURs to test natural language understanding (NLU) and dialogue state tracking (DST) models before deployment in a new domain. We also release IndirectRequests, a dataset of IURs based on the Schema Guided Dialog (SGD) corpus, as a comparative testbed for evaluating the performance of smaller models in handling indirect requests.

In the field of neural data compression, the prevailing focus has been on optimizing algorithms for either classical distortion metrics, such as PSNR or SSIM, or human perceptual quality. With increasing amounts of data consumed by machines rather than humans, a new paradigm of machine-oriented compressionx2013which prioritizes the retention of features salient for machine perception over traditional human-centric criteriax2013has emerged, creating several new challenges to the development, evaluation, and deployment of systems utilizing lossy compression. In particular, it is unclear how different approaches to lossy compression will affect the performance of downstream machine perception tasks. To address this under-explored area, we evaluate various perception modelsx2013including image classification, image segmentation, speech recognition, and music source separationx2013under severe lossy compression. We utilize several popular codecs spanning conventional, neural, and generative compression architectures. Our results indicate three key findings: (1) using generative compression, it is feasible to leverage highly compressed data while incurring a negligible impact on machine perceptual quality; (2) machine perceptual quality correlates strongly with deep similarity metrics, indicating a crucial role of these metrics in the development of machine-oriented codecs; and (3) using lossy compressed datasets, (e.g. ImageNet) for pre-training can lead to counter-intuitive scenarios where lossy compression increases machine perceptual quality rather than degrading it. To encourage engagement on this growing area of research, our code and experiments are available at: https://github.com/danjacobellis/MPQ.

Deep learning (DL) has proven to be a highly effective approach for developing models in diverse contexts, including visual perception, speech recognition, and machine translation. However, the end-to-end process for applying DL is not trivial. It requires grappling with problem formulation and context understanding, data engineering, model development, deployment, continuous monitoring and maintenance, and so on. Moreover, each of these steps typically relies heavily on humans, in terms of both knowledge and interactions, which impedes the further advancement and democratization of DL. Consequently, in response to these issues, a new field has emerged over the last few years: automated deep learning (AutoDL). This endeavor seeks to minimize the need for human involvement and is best known for its achievements in neural architecture search (NAS), a topic that has been the focus of several surveys. That stated, NAS is not the be-all and end-all of AutoDL. Accordingly, this review adopts an overarching perspective, examining research efforts into automation across the entirety of an archetypal DL workflow. In so doing, this work also proposes a comprehensive set of ten criteria by which to assess existing work in both individual publications and broader research areas. These criteria are: novelty, solution quality, efficiency, stability, interpretability, reproducibility, engineering quality, scalability, generalizability, and eco-friendliness. Thus, ultimately, this review provides an evaluative overview of AutoDL in the early 2020s, identifying where future opportunities for progress may exist.

Benchmarks increasingly guide deployment, procurement and scientific screening, yet a score supports only the response it records, not necessarily the deployment action. We introduce deployment-complete benchmarking, which tests whether benchmark evidence determines a deployment action. A benchmark is complete for a claim exactly when the action is constant on each evidence fiber; mixed fibers expose missing deployment information, and completion curves quantify the evidence required to resolve ambiguity. In controlled response spaces, benchmark-channel conformal coverage of 94.98% transferred poorly to an unmeasured deployment channel (10.07%), whereas response-rank intervals achieved 94.91% coverage; even zero benchmark error certified only 45.4% of candidates at the largest residual size. Public audits revealed incompleteness, including 97.9% mixed Tox21 fibers and zero median certifiable fraction in main Matbench and JARVIS audits. In held-out replays, certify-then-acquire reduced false decisions from 1.19% to 0.027% in Tox21 and from 20.3% to 0.128% in JARVIS, while changing model choice and identifying deployment-relevant probes. Deployment-ready benchmarks should report evidence, supported actions, ambiguity and completion cost rather than scores alone.

Agentic coding assistants are increasingly given extra capabilities, such as browser based testing tools and design oriented system prompts, on the assumption that more capability yields better software. This study tested that assumption directly. Ninety independent agent runs built the same application, a real time retrospective board, from one detailed specification, each scored on a fixed 14 criterion functional rubric (42 point maximum) and a visual quality review. The runs spanned several model generations, two agent harnesses, two reasoning effort levels, a testing tool, and two design oriented prompts. Capability tier dominated: frontier models clustered near the ceiling while a low cost local model fell to 24 to 37 points. A criterion level analysis revealed what run totals conceal. Container deployment was the dominant defect, failing first try in 44 percent of runs, with its failure rate shifting sharply across model generations while mean totals moved less than a point. The testing tool raised cost by 42 to 68 percent without improving functional score or reliability, even on interface visible criteria. Raising reasoning effort from High to xHigh lifted first try perfect runs from 28 percent to 89 percent and cut corrective prompts about five fold, for 9 to 29 percent more cost. A design oriented prompt raised visual quality, 4.5 versus 3.0 on a 5 point scale, without lifting function, and a one paragraph paraphrase of its directive reproduced the entire lift. The practical lesson is to match the fix to the failure: most first run failures came from weak reasoning, which a stronger model or more effort prevents, not from visible flaws a checking tool would catch.

The United States Department of Defense (DOD) looks to accelerate the development and deployment of AI capabilities across a wide spectrum of defense applications to maintain strategic advantages. However, many common features of AI algorithms that make them powerful, such as capacity for learning, large-scale data ingestion, and problem-solving, raise new technical, security, and ethical challenges. These challenges may hinder adoption due to uncertainty in development, testing, assurance, processes, and requirements. Trustworthiness through assurance is essential to achieve the expected value from AI. This paper proposes a claims-based framework for risk management and assurance of AI systems that addresses the competing needs for faster deployment, successful adoption, and rigorous evaluation. This framework supports programs across all acquisition pathways provide grounds for sufficient confidence that an AI-enabled system (AIES) meets its intended mission goals without introducing unacceptable risks throughout its lifecycle. The paper's contributions are a framework process for AI assurance, a set of relevant definitions to enable constructive conversations on the topic of AI assurance, and a discussion of important considerations in AI assurance. The framework aims to provide the DOD a robust yet efficient mechanism for swiftly fielding effective AI capabilities without overlooking critical risks or undermining stakeholder trust.

Infrastructure-as-Code (IaC) generation holds significant promise for automating cloud infrastructure provisioning. Recent advances in Large Language Models (LLMs) present a promising opportunity to democratize IaC development by generating deployable infrastructure templates from natural language descriptions. However, current evaluation focuses on syntactic correctness while ignoring deployability, the critical measure of the utility of IaC configuration files. Six state-of-the-art LLMs performed poorly on deployability, achieving only 20.8sim30.2% deployment success rate on the first attempt. In this paper, we construct DPIaC-Eval, the first deployability-centric IaC template benchmark consisting of 153 real-world scenarios cross 58 unique services. Also, we propose an LLM-based deployability-centric framework, dubbed IaCGen, that uses iterative feedback mechanism encompassing format verification, syntax checking, and live deployment stages, thereby closely mirroring the real DevOps workflows. Results show that IaCGen can make 54.6sim91.6% generated IaC templates from all evaluated models deployable in the first 10 iterations. Additionally, human-in-the-loop feedback that provide direct guidance for the deployability errors, can further boost the performance to over 90% passItr@25 on all evaluated LLMs. Furthermore, we explore the trustworthiness of the generated IaC templates on user intent alignment and security compliance. The poor performance (25.2% user requirement coverage and 8.4% security compliance rate) indicates a critical need for continued research in this domain.

Autonomous embedded nodes deployed in connectivity-denied environments - remote forest perimeters, farm boundaries, and cargo in transit across highways or open ocean - share a common set of engineering requirements that are usually addressed by separate, purpose-built systems: passive-infrared (PIR) triggered wake-up, inertial-measurement-unit (IMU) driven active stabilization, and long-range communication under strict power budgets. This paper argues that a perimeter/wildlife security turret and a high-value cargo protection crate are, from a systems perspective, two parametrizations of the same generalized node architecture rather than two unrelated designs. We formalize this generalized architecture, extend it with three sensing/communication modalities not present in either original design - single-point LiDAR ranging, a LoRa/LoRaWAN regional mesh tier, and a satellite short-burst-data (SBD) global tier - and couple the resulting telemetry to a Geographic Information System (GIS) layer via a proposed Composite Risk Index (CRI) that fuses breach events, impact severity, and connectivity state into a single spatially-referenced score. We present the sensor-fusion, proportional-integral-derivative (PID) stabilization, link-budget, received-signal-strength-indicator (RSSI) localization, and CRI formulations that unify the two deployment modes, provide a simulated closed-loop stabilization response and a tiered-communication trade-off analysis, and instantiate the two original projects as case studies of the generalized architecture. The framework is intended as an engineering blueprint and a starting point for field validation rather than as a report of field-tested results.

Deploying foundation models in embodied edge systems is fundamentally a systems problem, not just a problem of model compression. Real-time control must operate within strict size, weight, and power constraints, where memory traffic, compute latency, timing variability, and safety margins interact directly. The Deployment Gauntlet organizes these constraints into eight coupled barriers that determine whether embodied foundation models can run reliably in practice. Across representative edge workloads, autoregressive Vision-Language-Action policies are constrained primarily by memory bandwidth, whereas diffusion-based controllers are limited more by compute latency and sustained execution cost. Reliable deployment therefore depends on system-level co-design across memory, scheduling, communication, and model architecture, including decompositions that separate fast control from slower semantic reasoning.

We present MÖVE (Modelle für die Öffentliche Verwaltung Evaluieren), a holistic benchmark for evaluating large language models (LLMs) in the context of the German public sector. While LLMs are increasingly adopted in public administration, model selection remains largely ad hoc, and existing benchmarks offer limited guidance: they are predominantly English-centric, US-centric in content, and focus exclusively on task performance. MÖVE addresses these gaps by evaluating 39 models across two complementary dimensions. Performance criteria cover summarization, question answering, and topic extraction. Governance criteria assess hallucination tendencies, energy consumption, provider transparency, and alignment with German constitutional values and knowledge about positions by German political parties. In total, we utilize ten German-language datasets, including gold- and silverstandard datasets that we constructed to reflect public-administration domains. We employ a multi-metric evaluation strategy combining classical NLP metrics, embedding-based methods, and LLM-as-a-judge approaches. Our results show that no single model dominates across all criteria: top performers differ between tasks, and model size alone is a poor predictor of quality. We further evaluate the benchmark itself, analyzing its statistical precision, LLM judge reliability, the impact of our private datasets on model rankings, the sensitivity of our results to prompt formulation, and the validity of our energy consumption estimates. MÖVE is designed as a living benchmark under active development; results are publicly available at https://moeve.bundesdruckerei.de/.

As frontier language models advance, policymakers and model developers need methods for assessing whether model access materially increases a non-expert actor's ability to plan high-consequence Chemical, Biological, Radiological, or Nuclear (CBRN) misuse relative to public tools alone. Existing CBRN evaluations differ in non-expert definitions, threat scope, baselines, scoring rubrics, and decision rules, making results difficult to compare across studies. We introduce a Threshold Exceedance Criteria (TEC) framework that decomposes an uplift study into independently executable components: determining non-expert participant eligibility, defining the CBRN threat scope for the study, and statistically estimating material uplift. We then operationalize the TEC framework in a large-scale empirical study using a design that determines two forms of uplift: generative (where a model assists plan creation from scratch) and revisionist (where a model assists refinement of an existing plan). The study produced attack plans across the CBRN domains, which we evaluated through subject-matter-expert review to estimate generative and revisionist uplift. Applying the framework, our empirical study revealed domain heterogeneity: under this controlled pre-release evaluation, model-assisted plans sometimes received expert-equivalent instructional ratings, but confirmed material uplift was limited to the radiological domain. These findings informed mitigation and deployment-governance decisions rather than characterizing deployed model behavior. We conclude with methodological lessons for future CBRN uplift evaluations, emphasizing prespecified criteria, explicit baselines, separation of generative and revisionist estimates, and careful distinction between preliminary screening signals and confirmed risk determinations.

As national security institutions increasingly integrate Artificial Intelligence (AI) into decision-making and content generation processes, understanding the inherent biases of large language models (LLMs) is crucial. This study presents a novel benchmark designed to evaluate the biases and preferences of seven prominent foundation models-Llama 3.1 8B Instruct, Llama 3.1 70B Instruct, GPT-4o, Gemini 1.5 Pro-002, Mixtral 8x22B, Claude 3.5 Sonnet, and Qwen2 72B-in the context of international relations (IR). We designed a bias discovery study around core topics in IR using 400-expert crafted scenarios to analyze results from our selected models. These scenarios focused on four topical domains including: military escalation, military and humanitarian intervention, cooperative behavior in the international system, and alliance dynamics. Our analysis reveals noteworthy variation among model recommendations based on scenarios designed for the four tested domains. Particularly, Qwen2 72B, Gemini 1.5 Pro-002 and Llama 3.1 8B Instruct models offered significantly more escalatory recommendations than Claude 3.5 Sonnet and GPT-4o models. All models exhibit some degree of country-specific biases, often recommending less escalatory and interventionist actions for China and Russia compared to the United States and the United Kingdom. These findings highlight the necessity for controlled deployment of LLMs in high-stakes environments, emphasizing the need for domain-specific evaluations and model fine-tuning to align with institutional objectives.

In recent years, the widespread adoption of Large Language Models (LLMs) has sparked interest in their potential for application within the military domain. However, the current generation of LLMs demonstrate sub-optimal performance on Army use cases, due to the prevalence of domain-specific vocabulary and jargon. In order to fully leverage LLMs in-domain, many organizations have turned to fine-tuning to circumvent the prohibitive costs involved in training new LLMs from scratch. In light of this trend, we explore the viability of adapting open-source LLMs for usage in the Army domain in order to address their existing lack of domain-specificity. Our investigations have resulted in the creation of three distinct generations of TRACLM, a family of LLMs fine-tuned by The Research and Analysis Center (TRAC), Army Futures Command (AFC). Through continuous refinement of our training pipeline, each successive iteration of TRACLM displayed improved capabilities when applied to Army tasks and use cases. Furthermore, throughout our fine-tuning experiments, we recognized the need for an evaluation framework that objectively quantifies the Army domain-specific knowledge of LLMs. To address this, we developed MilBench, an extensible software framework that efficiently evaluates the Army knowledge of a given LLM using tasks derived from doctrine and assessments. We share preliminary results, models, methods, and recommendations on the creation of TRACLM and MilBench. Our work significantly informs the development of LLM technology across the DoD and augments senior leader decisions with respect to artificial intelligence integration.

Test-time reasoning is increasingly used as a serving-time control knob, but extra reasoning is not uniformly valuable: it can repair failed attempts, waste compute on already-correct answers, or introduce harmful answer changes. We study this as a deployment allocation problem rather than a new-verifier problem. We introduce \sevra, Selective Verification for Reasoning Allocation, a serving-layer controller that decides whether to preserve a frozen solver's initial answer or invoke active verification. Using a frozen Qwen3-4B solver, we log intervention outcomes and train recoverability-aware gates from serving-visible attempt state. On \mathfive, selective verification reaches 76.3\% accuracy, compared with 75.5\% for always verifying, while reducing post-generation tokens by 26.8\% and harmful flips from 2.2\% to 1.0\%. However, an 8,192-token initial solve reaches 76.0\% accuracy with 28\% fewer total model tokens, showing that selective recovery is useful but not the best tested cost frontier. In frozen transfer to \gsm, the selective policy verifies only 3.0\% of examples, improves accuracy from 93.4\% to 94.5\%, and reduces verification tokens by 91.2\% relative to always verifying; again, a longer initial solve matches its accuracy with fewer realized tokens. On CommonsenseQA, always-on verification hurts, while Self-Consistency@5 improves accuracy at about five times the realized token cost. The resulting deployment rule is: tune the initial budget first, then use selective recovery when explicit checks, bounded retries, auditability, or regression-risk control matter.

Many deployments must compare candidate language models for safety before a labeled benchmark exists for the relevant language, sector, or regulatory regime. We formalize this setting as benchmarkless comparative safety scoring and specify the contract under which a scenario-based audit can be interpreted as deployment evidence. Scores are valid only under a fixed scenario pack, rubric, auditor, judge, sampling configuration, and rerun budget. Because no labels are available, we replace ground-truth agreement with an instrumental-validity chain: responsiveness to a controlled safe-versus-abliterated contrast, dominance of target-driven variance over auditor and judge artifacts, and stability across reruns. We instantiate the chain in SimpleAudit, a local-first scoring instrument, and validate it on a Norwegian safety pack. Safe and abliterated targets separate with AUROC values between 0.89 and 1.00, target identity is the dominant variance component (η^2 approx 0.52), and severity profiles stabilize by ten reruns. Applying the same chain to Petri shows that it admits both tools. The substantial differences arise upstream of the chain, in claim-contract enforcement and deployment fit. A Norwegian public-sector procurement case comparing Borealis and Gemma 3 demonstrates the resulting evidence in practice: the safer model depends on scenario category and risk measure. Consequently, scores, matched deltas, critical rates, uncertainty, and the auditor and judge used must be reported together rather than collapsed into a single ranking.

Clinical decision-support systems are expert systems whose recommendations clinicians act on directly, yet they are usually cleared on one aggregate accuracy number from a held-out test set. That number says nothing about input reliability under encoding shifts, subgroup gaps, threshold sensitivity, or operational feasibility. We present RISED, a pre-deployment evaluation framework operationalising five dimensions (Reliability, Inclusivity, Sensitivity, Equity, Deployability) through BCa bootstrap 95% confidence intervals, literature-grounded thresholds, and Holm-Bonferroni-corrected PASS / FAIL / INCONCLUSIVE verdicts; Equity is a proxy-dependence diagnostic rather than a gating test. Applied to seven cohorts spanning 35 years (n from 303 to 99,492), RISED surfaces failures invisible to AUROC: on Diabetes 130, Reliability passes by three orders of magnitude (PSS = 0.0004) while Inclusivity (AUC parity gap = 0.262) and Sensitivity (max threshold-flip rate 49.1%) fail decisively; both NHIS cohorts reproduce this. NHANES 2021-2023, with a complete feature profile, achieves INCONCLUSIVE verdicts; BRFSS 2024 produces the suite's most severe Sensitivity failure (max threshold-flip rate 64.2%) after instrument rotation removed hypertension and cholesterol. The pattern recurs on credit- and income-prediction cohorts, confirming domain-agnosticity; a multi-model check shows the failures are data-driven, not model-specific. RISED ships as an open-source Python package complementing TRIPOD+AI, FUTURE-AI, and Fairlearn with the structured numerical evidence those standards require but do not prescribe.

LLMs have immense potential for generating plans, transforming an initial world state into a desired goal state. A large body of research has explored the use of LLMs for various planning tasks, from web navigation to travel planning and database querying. However, many of these systems are tailored to specific problems, making it challenging to compare them or determine the best approach for new tasks. There is also a lack of clear and consistent evaluation criteria. Our survey aims to offer a comprehensive overview of current LLM planners to fill this gap. It builds on foundational work by Kartam and Wilkins (1990) and examines six key performance criteria: completeness, executability, optimality, representation, generalization, and efficiency. For each, we provide a thorough analysis of representative works and highlight their strengths and weaknesses. Our paper also identifies crucial future directions, making it a valuable resource for both practitioners and newcomers interested in leveraging LLM planning to support agentic workflows.

Evaluation of language model outputs on structured writing tasks is typically conducted with a number of desirable criteria presented to human evaluators or large language models (LLMs). For instance, on a prompt like "Help me draft an academic talk on coffee intake vs research productivity", a model response may be evaluated for criteria like accuracy and coherence. However, high-quality responses should do more than just satisfy basic task requirements. An effective response to this query should include quintessential features of an academic talk, such as a compelling opening, clear research questions, and a takeaway. To help identify these implicit criteria, we introduce EvalAgent, a novel framework designed to automatically uncover nuanced and task-specific criteria. EvalAgent first mines expert-authored online guidance. It then uses this evidence to propose diverse, long-tail evaluation criteria that are grounded in reliable external sources. Our experiments demonstrate that the grounded criteria produced by EvalAgent are often implicit (not directly stated in the user's prompt), yet specific (high degree of lexical precision). Further, EvalAgent criteria are often not satisfied by initial responses but they are actionable, such that responses can be refined to satisfy them. Finally, we show that combining LLM-generated and EvalAgent criteria uncovers more human-valued criteria than using LLMs alone.

This work introduces a fully-automated RIS deployment strategy validated through a digital twin, powered by Sionna ray tracing, of a UK city. On a scene calibrated with measured data, the method jointly optimizes RIS placement, orientation, configuration, and BS beamforming across 4G, 5G, and hypothetical 6G frequencies. Candidate RIS sites are identified via scattering-based rays, while user clustering reduces deployment overhead. Results show that meaningful coverage enhancement requires dense, large-aperture RIS deployments, raising questions about the practicality and cost of large-scale RIS adoption.

Foundation models are moving from response generation into operational roles. They plan across steps, call tools, request human input, coordinate with other agents, and increasingly carry responsibility for work that affects customers, claims, code, contracts, and clinical decisions. Production deployments are no longer one human supervising one model. They are multi-human, multi-agent collaborations that cross teams, time zones, and trust boundaries. The technical surface for this collaboration remains weakly specified. When an agent drafts a response and a human edits it before it ships, the moment of human judgement is the most valuable signal in the system. In current practice it is recorded, if at all, in application code, chat threads, ticket comments, and tribal memory. Two protocol standards address adjacent concerns: MCP standardises agent access to tools and data, and A2A standardises agent-to-agent interoperability. Neither defines the shared workspace in which humans and agents perform accountable work together. This paper presents CHAP, the Collaborative Human-Agent Protocol. Under CHAP, the override that used to vanish into a chat thread becomes a structured event carrying a diff, a rationale, and a content hash. The handoff between shifts becomes a portable envelope rather than a pinned message. The human approval of an agent's draft becomes a non-repudiable signed decision that can be replayed years later. The protocol achieves this through a small Core (workspaces, participants, tasks, artefacts, and an append-only evidence log) together with composable profiles that add review, modes, routing, deliberation, handoff, identity, signatures, and transparency-backed audit as deployments require them. Specification, reference implementation, conformance suite, and worked examples are available at: https://github.com/BrightbeamAI/chap

Higher Degree by Research (HDR) candidates increasingly depend on cloud-provisioned virtual machines and local GPU hardware for their computational experiments, yet a persistent and under-addressed gap exists between having compute resources and using them productively. Cloud and infrastructure teams can provision virtual machines, but the path from a raw VM to a reproducible, GPU-ready research environment remains a significant barrier for researchers who are domain experts, not systems engineers. We identify this gap as a missing adapter layer between cloud provisioning and interactive research work. We present a lightweight, open-source solution built on k3s and Coder that implements this adapter layer and is already in active use in our research workspace environment. Our CI/CD pipeline connects GitHub directly to the local cluster, deploying research projects in under five minutes. We define a concrete metrics framework for evaluating this layer -- covering deployment latency, environment reproducibility, onboarding friction, and resource utilisation -- and establish baselines against which improvements can be measured.

As modern software systems continue to grow in complexity, triage has become a fundamental process in system operations and maintenance. Triage aims to efficiently prioritize, assign, and assess issues to ensure the reliability of complex environments. The vast amount of heterogeneous data generated by software systems has made effective triage indispensable for maintaining reliability, facilitating maintainability, and enabling rapid issue response. Motivated by these challenges, researchers have devoted extensive effort to advancing triage automation and have achieved significant progress over the past two decades. This survey provides a comprehensive review of 234 papers from 2004 to the present, offering an in-depth examination of the fundamental concepts, system architecture, and problem statement. By comparing the distinct goals of academic and industrial research and by analyzing empirical studies of industrial practices, we identify the major obstacles that limit the practical deployment of triage systems. To assist practitioners in method selection and performance evaluation, we summarize widely adopted open-source datasets and evaluation metrics, providing a unified perspective on the measurement of triage effectiveness. Finally, we outline potential future directions and emerging opportunities to foster a closer integration between academic innovation and industrial application. All reviewed papers and projects are available at https://github.com/AIOps-Lab-NKU/TriageSurvey.

This paper presents a fully automated, data-driven framework for the large-scale deployment of reconfigurable intelligent surfaces (RISs) in cellular networks. Leveraging physically consistent ray tracing and empirical data from a commercial deployment in the UK, the proposed method jointly optimizes RIS placement, orientation, configuration, and base station beamforming in dense urban environments across frequency bands (corresponding to 4G, 5G, and a hypothetical 6G system). Candidate RIS locations are identified via reflection- and scattering-based heuristics using calibrated electromagnetic models within the Sionna Ray Tracing (RT) engine. Outage users are clustered to reduce deployment complexity, and the tradeoff between coverage gains and infrastructure cost is systematically evaluated. It is shown that achieving meaningful coverage improvement in urban areas requires a dense deployment of large-aperture RIS units, raising questions about cost-effectiveness. To facilitate reproducibility and future research, the complete simulation framework and RIS deployment algorithms are provided as open-source software.

Reinforcement learning with verifiable rewards has made post-training highly effective when correctness can be checked automatically. However, many important model behaviors require satisfying several qualitative criteria at once. Rubric-based rewards address this setting by grading prompt-specific criteria and aggregating them into a scalar reward. Yet standard static aggregations conflate a criterion's human-assigned importance with its current usefulness as an optimization signal. We show that this assumption breaks down in rubric RL: many important criteria are already saturated or currently unreachable, while criteria that distinguish rollouts are not necessarily those with the largest human weights. We introduce POW3R, a policy-aware rubric reward framework that preserves human weights and category balance as the rubric objective while adapting criterion-level reward weights during training. POW3R uses rollout-level contrast to emphasize criteria that currently separate the policy's outputs, making the GRPO reward more informative without changing the underlying evaluation target. Across three base policies on two datasets spanning multimodal and text-only settings, POW3R wins 24 of 30 base-policy/metric comparisons, improving both mean rubric reward and strict completion (the fraction of prompts whose response satisfies every required rubric criterion) over vanilla GRPO with rubric rewards, and reaches the same plateau in 2.5--4times fewer training steps. Rubric rewards should therefore distinguish what should matter in the final answer from what can teach the current policy.

Security is becoming a pivotal point in cloud platforms. Several divisions, such as business organisations, health care, government, etc., have experienced cyber-attacks on their infrastructures. This research focuses on security issues within Continuous Integration and Deployment (CI/CD) pipelines in a cloud platform as a reaction to recent cyber breaches. This research proposes a blockchain-based solution to enhance CI/CD pipeline security. This research aims to develop a framework that leverages blockchain's distributed ledger technology and tamper-resistant features to improve CI/CD pipeline security. The goal is to emphasise secure software deployment by integrating threat modelling frameworks and adherence to coding standards. It also aims to employ tools to automate security testing to detect publicly disclosed vulnerabilities and flaws, such as an outdated version of Java Spring Framework, a JavaScript library from an unverified source, or a database library that allows SQL injection attacks in the deployed software through the framework.

This document consolidates publicly reported technical details about Metas Llama 4 model family. It summarizes (i) released variants (Scout and Maverick) and the broader herd context including the previewed Behemoth teacher model, (ii) architectural characteristics beyond a high-level MoE description covering routed/shared-expert structure, early-fusion multimodality, and long-context design elements reported for Scout (iRoPE and length generalization strategies), (iii) training disclosures spanning pre-training, mid-training for long-context extension, and post-training methodology (lightweight SFT, online RL, and lightweight DPO) as described in release materials, (iv) developer-reported benchmark results for both base and instruction-tuned checkpoints, and (v) practical deployment constraints observed across major serving environments, including provider-specific context limits and quantization packaging. The manuscript also summarizes licensing obligations relevant to redistribution and derivative naming, and reviews publicly described safeguards and evaluation practices. The goal is to provide a compact technical reference for researchers and practitioners who need precise, source-backed facts about Llama 4.

Benchmarks are necessary for healthcare evaluation, but are not sufficient for predicting deployment performance. Our position is that the evaluation--deployment gap arises not because of poorly designed benchmarks, but from implicit assumptions about how users interact with models that cannot be surfaced from benchmarks alone. To make this precise, we propose a classification of assumptions into two categories: task, which can be tested from conversation data alone, and outcome, which requires outcome data and behavioral studies for testing. Critically, outcome assumptions depend on human behavior, something that even well-designed benchmarks cannot directly observe. To demonstrate the operationality of this framework, we retrospectively analyze a healthcare RCT as a case study and find that the gap naturally separates into task and outcome gaps of roughly equal size. To address this, we make two contributions: first, we propose BenchmarkCards, an artifact that documents assumptions, and second, we propose staged evaluation, a procedure that systematically tests assumptions and evaluates performance.

We introduce Strategic Doctrine Language Models (sdLM), a learning-system framework for multi-document strategic reasoning with doctrinal consistency constraints and calibrated uncertainty. The approach combines multi-document attention, temporal encoding, and a doctrine-consistency layer to improve long-horizon forecasting and plan plausibility while reducing severe doctrinal violations. We evaluate sdLM using (i) expert-panel scoring of strategic scenarios (N=47), (ii) doctrine consistency on 336 doctrine publications (12,847 statements), and (iii) geopolitical forecasting on 127 historical counterfactuals (1945-2020) across 12-60 month horizons. Across these benchmarks, sdLM achieves higher strategic quality and better calibration than strong general-purpose LLM baselines, and remains competitive with human experts on long-horizon judgments. We further report ablations, scaling trends, and deployment-oriented performance/latency characteristics to clarify which components drive improvements and how they translate to operational settings.

Large language models (LLMs) represent a transformative class of AI tools capable of revolutionizing various aspects of healthcare by generating human-like responses across diverse contexts and adapting to novel tasks following human instructions. Their potential application spans a broad range of medical tasks, such as clinical documentation, matching patients to clinical trials, and answering medical questions. In this primer paper, we propose an actionable guideline to help healthcare professionals more efficiently utilize LLMs in their work, along with a set of best practices. This approach consists of several main phases, including formulating the task, choosing LLMs, prompt engineering, fine-tuning, and deployment. We start with the discussion of critical considerations in identifying healthcare tasks that align with the core capabilities of LLMs and selecting models based on the selected task and data, performance requirements, and model interface. We then review the strategies, such as prompt engineering and fine-tuning, to adapt standard LLMs to specialized medical tasks. Deployment considerations, including regulatory compliance, ethical guidelines, and continuous monitoring for fairness and bias, are also discussed. By providing a structured step-by-step methodology, this tutorial aims to equip healthcare professionals with the tools necessary to effectively integrate LLMs into clinical practice, ensuring that these powerful technologies are applied in a safe, reliable, and impactful manner.

Ensuring that Software Requirements Specifications (SRS) align with higher-level organizational or national requirements is vital, particularly in regulated environments such as finance and aerospace. In these domains, maintaining consistency, adhering to regulatory frameworks, minimizing errors, and meeting critical expectations are essential for the reliable functioning of systems. The widespread adoption of large language models (LLMs) highlights their immense potential, yet there remains considerable scope for improvement in retrieving relevant information and enhancing reasoning capabilities. This study demonstrates that integrating a robust Graph-RAG framework with advanced prompt engineering techniques, such as Chain of Thought and Tree of Thought, can significantly enhance performance. Compared to baseline RAG methods and simple prompting strategies, this approach delivers more accurate and context-aware results. While this method demonstrates significant improvements in performance, it comes with challenges. It is both costly and more complex to implement across diverse contexts, requiring careful adaptation to specific scenarios. Additionally, its effectiveness heavily relies on having complete and accurate input data, which may not always be readily available, posing further limitations to its scalability and practicality.

We present a deployed system that automates end-to-end customer support workflows inside an enterprise Business Process Management (BPM) platform. The approach is scalable in production and reaches selective automation within two weeks for a new process, leveraging supervision already generated at scale: structured per-case UI interaction traces and low-overhead copilot feedback, where operators either accept a suggestion or provide a correction. A staged deployment pipeline trains a next UI action policy, learns a critic from copilot feedback to calibrate abstention, and executes only high-confidence steps in the background while deferring uncertain decisions to operators and resuming from the updated UI state. This setup lets one operator supervise multiple concurrent sessions and be interrupted only when the system is uncertain. The system operates on a schema-driven view of the BPM interface and includes monitoring and safe fallbacks for production. In production, it automated 45% of sessions and reduced average handling time by 39% without degrading support quality level.

The emergence of Software-Defined Vehicles represents a fundamental shift in automotive design, prioritizing software-centric architectures over traditional hardware-driven models. SDVs require modularity, interoperability, real-time processing, and over-the-air update capabilities throughout the vehicle lifecycle. However, current vehicle systems, characterized by tightly coupled software and hardware, struggle to meet these demands due to their complexity and heterogeneity. A critical first step toward enabling SDVs is the decoupling of software from hardware, which can be facilitated through a robust Hardware Abstraction Layer. While existing HALs offer hardware independence and standardized interfaces, their applicability and effectiveness in SDV contexts remain uncertain. This paper systematically evaluates current automotive HALs and explores HAL mechanisms from non-automotive domains, including smartphones, networking, and industrial automation, to extract cross-domain insights relevant to SDV development. A criteria-driven evaluation framework is developed to assess HALs against SDV-specific needs. Findings reveal that while middleware-based HALs offer portability and modularity, hypervisor-based approaches better support safety, OTA readiness, and hardware efficiency. Limitations in both approaches are identified, prompting recommendations for a hybrid HAL design that integrates hypervisor isolation with middleware standardization. This paper contributes to the ongoing developments in automotive software architecture by offering insights into the applicability and effectiveness of current HAL strategies. It provides actionable guidance for designing flexible, scalable, and future-ready HALs to support SDVs across their lifecycle.

Trustworthy deployment of LLM-based agents in software systems requires evaluating how they perform on application-specific workflows, with enough granularity to localize where they succeed and fail. Yet existing agent evaluation mechanisms are limited: benchmarks have low construct validity for application-specific workflows and environments, and replica evaluation environments are expensive and prone to drift. We propose Copy-on-Write (CoW) Scoring, a framework that evaluates agent operations directly within application environments using a PostgreSQL-level Copy-on-Write mechanism to isolate agent writes. CoW Scoring produces session- and operation-level scores that highlight where agents' database write operations succeed and fail in a given application environment, enabling inexpensive evaluation and iteration on agent harnesses and tool surfaces. We demonstrate the framework on Plane, an open-source project-management platform, where analysis surfaced specific issues in the tool surface, and corresponding fixes produced measurable improvements on affected models. Python library: https://github.com/trail-ml/agent-cow-python

Large language models (LLMs) are increasingly characterised in recent evaluation work as having stable, model-level preference and value systems. However, accompanying robustness checks are limited to incidental prompt perturbations such as syntax variation and option reordering. This leaves open whether the measured properties survive when the surrounding task context changes, as it does in most real deployments. We test this directly across two established pairwise paradigms: ranking country preferences and eliciting utility judgements. In both, we make the deployment context -- the high-level task the model is performing while making concrete value-dependent choices -- our controlled variable, varied across framings such as writing a Reddit post or a news article. Across five LLMs and over 1.2M pairwise decisions, deployment context produces variation far larger than prompt paraphrasing and temperature controls. In country preference rankings over 15 countries, context induces widespread, statistically significant rank shifts; the aggregate Global North favouritism reported in prior work is itself context-dependent, with each model's bias shifting systematically across contexts. In utility elicitation over 50 outcomes, broad cross-category ordering is preserved, but fine-grained rankings within domains vary substantially, and cardinal exchange rates between outcomes (e.g. how many lives in one region equal one in another) shift by a factor of 2.47 at the median. Reported model-level preferences and utilities are therefore better understood as context-conditioned measurements than fixed model-level properties: safety guarantees obtained under one framing provide limited assurance in another.

Leading AI developers and startups are increasingly deploying agentic AI systems that can plan and execute complex tasks with limited human involvement. However, there is currently no structured framework for documenting the technical components, intended uses, and safety features of agentic systems. To fill this gap, we introduce the AI Agent Index, the first public database to document information about currently deployed agentic AI systems. For each system that meets the criteria for inclusion in the index, we document the system's components (e.g., base model, reasoning implementation, tool use), application domains (e.g., computer use, software engineering), and risk management practices (e.g., evaluation results, guardrails), based on publicly available information and correspondence with developers. We find that while developers generally provide ample information regarding the capabilities and applications of agentic systems, they currently provide limited information regarding safety and risk management practices. The AI Agent Index is available online at https://aiagentindex.mit.edu/

As AI technology advances, it is driving innovation across industries, increasing the demand for scalable AI project deployment. However, deployment remains a critical challenge due to complex environment configurations, dependency conflicts, cross-platform adaptation, and debugging difficulties, which hinder automation and adoption. This paper introduces AI2Agent, an end-to-end framework that automates AI project deployment through guideline-driven execution, self-adaptive debugging, and case \& solution accumulation. AI2Agent dynamically analyzes deployment challenges, learns from past cases, and iteratively refines its approach, significantly reducing human intervention. To evaluate its effectiveness, we conducted experiments on 30 AI deployment cases, covering TTS, text-to-image generation, image editing, and other AI applications. Results show that AI2Agent significantly reduces deployment time and improves success rates. The code and demo video are now publicly accessible.

In this report we describe the development of Command A, a powerful large language model purpose-built to excel at real-world enterprise use cases. Command A is an agent-optimised and multilingual-capable model, with support for 23 languages of global business, and a novel hybrid architecture balancing efficiency with top of the range performance. It offers best-in-class Retrieval Augmented Generation (RAG) capabilities with grounding and tool use to automate sophisticated business processes. These abilities are achieved through a decentralised training approach, including self-refinement algorithms and model merging techniques. We also include results for Command R7B which shares capability and architectural similarities to Command A. Weights for both models have been released for research purposes. This technical report details our original training pipeline and presents an extensive evaluation of our models across a suite of enterprise-relevant tasks and public benchmarks, demonstrating excellent performance and efficiency.

Amazon Web Services (AWS) offers three important Model Deployment Services for model developers: SageMaker, Lambda, and Elastic Container Service (ECS). These services have critical advantages and disadvantages, influencing model developer's adoption decisions. This comparative analysis reviews the merits and drawbacks of these services. This analysis found that Lambda AWS service leads in efficiency, autoscaling aspects, and integration during model development. However, ECS was found to be outstanding in terms of flexibility, scalability, and infrastructure control; conversely, ECS is better suited when it comes to managing complex container environments during model development, as well as addressing budget concerns -- it is, therefore, the preferred option for model developers whose objective is to achieve complete freedom and framework flexibility with horizontal scaling. ECS is better suited to ensuring performance requirements align with project goals and constraints. The AWS service selection process considered factors that include but are not limited to load balance and cost-effectiveness. ECS is a better choice when model development begins from the abstract. It offers unique benefits, such as the ability to scale horizontally and vertically, making it the best preferable tool for model deployment.

The risks of frontier AI may require international cooperation, which in turn may require verification: checking that all parties follow agreed-on rules. For instance, states might need to verify that powerful AI models are widely deployed only after their risks to international security have been evaluated and deemed manageable. However, research on AI verification could benefit from greater clarity and detail. To address this, this report provides an in-depth overview of AI verification, intended for both policy professionals and technical researchers. We present novel conceptual frameworks, detailed implementation options, and key R&D challenges. These draw on existing literature, expert interviews, and original analysis, all within the scope of confidentially overseeing AI development and deployment that uses thousands of high-end AI chips. We find that states could eventually verify compliance by using six largely independent verification approaches with substantial redundancy: (1) built-in security features in AI chips; (2-3) separate monitoring devices attached to AI chips; and (4-6) personnel-based mechanisms, such as whistleblower programs. While promising, these approaches require guardrails to protect against abuse and power concentration, and many of these technologies have yet to be built or stress-tested. To enable states to confidently verify compliance with rules on large-scale AI development and deployment, the R&D challenges we list need significant progress.