Daily Papers

Simultaneous Localization and Mapping (SLAM) is a key tool for monitoring construction sites, where aligning the evolving as-built state with the as-planned design enables early error detection and reduces costly rework. LiDAR-based SLAM achieves high geometric precision, but its sensors are typically large and power-demanding, limiting their use on portable platforms. Visual SLAM offers a practical alternative with lightweight cameras already embedded in most mobile devices. however, visually mapping construction environments remains challenging: repetitive layouts, occlusions, and incomplete or low-texture structures often cause drift in the trajectory map. To mitigate this, we propose an RGB-D SLAM system that incorporates the Building Information Model (BIM) as structural prior knowledge. Instead of relying solely on visual cues, our system continuously establishes correspondences between detected wall and their BIM counterparts, which are then introduced as constraints in the back-end optimization. The proposed method operates in real time and has been validated on real construction sites, reducing trajectory error by an average of 23.71% and map RMSE by 7.14% compared to visual SLAM baselines. These results demonstrate that BIM constraints enable reliable alignment of the digital plan with the as-built scene, even under partially constructed conditions.

As the construction industry advances toward digital transformation, BIM (Building Information Modeling)-based design has become a key driver supporting intelligent construction. Despite Large Language Models (LLMs) have shown potential in promoting BIM-based design, the lack of specific datasets and LLM evaluation benchmarks has significantly hindered the performance of LLMs. Therefore, this paper addresses this gap by proposing: 1) an evaluation benchmark for BIM-based design together with corresponding quantitative indicators to evaluate the performance of LLMs, 2) a method for generating textual data from BIM and constructing corresponding BIM-derived datasets for LLM evaluation and fine-tuning, and 3) a fine-tuning strategy to adapt LLMs for BIM-based design. Results demonstrate that the proposed domain-specific benchmark effectively and comprehensively assesses LLM capabilities, highlighting that general LLMs are still incompetent for domain-specific tasks. Meanwhile, with the proposed benchmark and datasets, Qwen-BIM is developed and achieves a 21.0% average increase in G-Eval score compared to the base LLM model. Notably, with only 14B parameters, performance of Qwen-BIM is comparable to that of general LLMs with 671B parameters for BIM-based design tasks. Overall, this study develops the first domain-specific LLM for BIM-based design by introducing a comprehensive benchmark and high-quality dataset, which provide a solid foundation for developing BIM-related LLMs in various fields.

This paper proposes an assistive system for architects that converts a large-scale point cloud into a standardized digital representation of a building for Building Information Modeling (BIM) applications. The process is known as Scan-to-BIM, which requires many hours of manual work even for a single building floor by a professional architect. Given its challenging nature, the paper focuses on helping architects on the Scan-to-BIM process, instead of replacing them. Concretely, we propose an assistive Scan-to-BIM system that takes the raw sensor data and edit history (including the current BIM model), then auto-regressively predicts a sequence of model editing operations as APIs of a professional BIM software (i.e., Autodesk Revit). The paper also presents the first building-scale Scan2BIM dataset that contains a sequence of model editing operations as the APIs of Autodesk Revit. The dataset contains 89 hours of Scan2BIM modeling processes by professional architects over 16 scenes, spanning over 35,000 m^2. We report our system's reconstruction quality with standard metrics, and we introduce a novel metric that measures how natural the order of reconstructed operations is. A simple modification to the reconstruction module helps improve performance, and our method is far superior to two other baselines in the order metric. We will release data, code, and models at a-scan2bim.github.io.

Semantic segmentation of indoor point clouds has found various applications in the creation of digital twins for robotics, navigation and building information modeling (BIM). However, most existing datasets of labeled indoor point clouds have been acquired by photogrammetry. In contrast, Terrestrial Laser Scanning (TLS) can acquire dense sub-centimeter point clouds and has become the standard for surveyors. We present 3DSES (3D Segmentation of ESGT point clouds), a new dataset of indoor dense TLS colorized point clouds covering 427 m 2 of an engineering school. 3DSES has a unique double annotation format: semantic labels annotated at the point level alongside a full 3D CAD model of the building. We introduce a model-to-cloud algorithm for automated labeling of indoor point clouds using an existing 3D CAD model. 3DSES has 3 variants of various semantic and geometrical complexities. We show that our model-to-cloud alignment can produce pseudo-labels on our point clouds with a \> 95% accuracy, allowing us to train deep models with significant time savings compared to manual labeling. First baselines on 3DSES show the difficulties encountered by existing models when segmenting objects relevant to BIM, such as light and safety utilities. We show that segmentation accuracy can be improved by leveraging pseudo-labels and Lidar intensity, an information rarely considered in current datasets. Code and data will be open sourced.

Automatic generation of Building Information Models (BIM) from building scans is a key challenge in architecture and construction. We present a modular pipeline for generating IFC-compliant BIM from 3D point clouds. The hybrid approach combines learning-based semantic segmentation with topology-aware geometric reconstruction to model structural elements accurately. We propose vIoU, adapting voxel-based overlap evaluation to Scan-to-BIM by enabling holistic, instance-matching-free comparison of reconstructed and ground-truth models. We release the German Hospital dataset (DeKH), including high-resolution point clouds, ground truth BIMs, and semantic annotations. Experiments on DeKH and CV4AEC datasets show significant improvements over a RANSAC-based baseline, demonstrating robustness and scalability.

Efficient information retrieval (IR) from building information models (BIMs) poses significant challenges due to the necessity for deep BIM knowledge or extensive engineering efforts for automation. We introduce BIM-GPT, a prompt-based virtual assistant (VA) framework integrating BIM and generative pre-trained transformer (GPT) technologies to support NL-based IR. A prompt manager and dynamic template generate prompts for GPT models, enabling interpretation of NL queries, summarization of retrieved information, and answering BIM-related questions. In tests on a BIM IR dataset, our approach achieved 83.5% and 99.5% accuracy rates for classifying NL queries with no data and 2% data incorporated in prompts, respectively. Additionally, we validated the functionality of BIM-GPT through a VA prototype for a hospital building. This research contributes to the development of effective and versatile VAs for BIM IR in the construction industry, significantly enhancing BIM accessibility and reducing engineering efforts and training data requirements for processing NL queries.

Artificial intelligence in construction increasingly depends on structured representations such as Building Information Models and knowledge graphs, yet early-stage building designs are predominantly created as flexible boundary-representation (B-rep) models that lack explicit spatial, semantic, and performance structure. This paper presents a robust, fully automated framework that transforms unstructured B-rep geometry into knowledge-graph-based Building Information Models and further into executable Building Energy Models. The framework enables artificial intelligence to explicitly interpret building elements, spatial topology, and their associated thermal and performance attributes. It integrates automated geometry cleansing, multiple auto space-generation strategies, graph-based extraction of space and element topology, ontology-aligned knowledge modeling, and reversible transformation between ontology-based BIM and EnergyPlus energy models. Validation on parametric, sketch-based, and real-world building datasets demonstrates high robustness, consistent topological reconstruction, and reliable performance-model generation. By bridging design models, BIM, and BEM, the framework provides an AI-oriented infrastructure that extends BIM- and graph-based intelligence pipelines to flexible early-stage design geometry, enabling performance-driven design exploration and optimization by learning-based methods.

BIM models provide structured representations of building geometry, semantics, and topology, yet extracting specific information from them remains remarkably difficult. Current approaches translate natural language into structured queries by assuming a fixed data organization (static approach), which BIM heterogeneity eventually invalidates. We address this with a new paradigm, adaptive exploration, where an LLM-based agent iteratively executes code to extract information from a BIM model, discovering its structure at runtime instead of assuming it. We evaluate this approach on ifc-bench v2, an open-source BIM question-answering benchmark introduced alongside this work, comprising 1,027 tasks across 37 IFC models from 21 projects. A factorial ablation across two LLM capability levels and four augmentation strategies shows that adaptive exploration significantly outperforms static query generation across all configurations, regardless of the augmentation strategy. These results indicate that BIM heterogeneity is best addressed at the paradigm level, not by further optimizing static approaches.

In this paper, we provide two case studies to demonstrate how artificial intelligence can empower civil engineering. In the first case, a machine learning-assisted framework, BRAILS, is proposed for city-scale building information modeling. Building information modeling (BIM) is an efficient way of describing buildings, which is essential to architecture, engineering, and construction. Our proposed framework employs deep learning technique to extract visual information of buildings from satellite/street view images. Further, a novel machine learning (ML)-based statistical tool, SURF, is proposed to discover the spatial patterns in building metadata. The second case focuses on the task of soft-story building classification. Soft-story buildings are a type of buildings prone to collapse during a moderate or severe earthquake. Hence, identifying and retrofitting such buildings is vital in the current earthquake preparedness efforts. For this task, we propose an automated deep learning-based procedure for identifying soft-story buildings from street view images at a regional scale. We also create a large-scale building image database and a semi-automated image labeling approach that effectively annotates new database entries. Through extensive computational experiments, we demonstrate the effectiveness of the proposed method.

Existing computer-use agents primarily focus on general-purpose desktop automation tasks, with limited exploration of their application in highly specialized domains. In particular, the 3D building modeling process in the Architecture, Engineering, and Construction (AEC) sector involves open-ended design tasks and complex interaction patterns within Building Information Modeling (BIM) authoring software, which has yet to be thoroughly addressed by current studies. In this paper, we propose BIMgent, an agentic framework powered by multimodal large language models (LLMs), designed to enable autonomous building model authoring via graphical user interface (GUI) operations. BIMgent automates the architectural building modeling process, including multimodal input for conceptual design, planning of software-specific workflows, and efficient execution of the authoring GUI actions. We evaluate BIMgent on real-world building modeling tasks, including both text-based conceptual design generation and reconstruction from existing building design. The design quality achieved by BIMgent was found to be reasonable. Its operations achieved a 32% success rate, whereas all baseline models failed to complete the tasks (0% success rate). Results demonstrate that BIMgent effectively reduces manual workload while preserving design intent, highlighting its potential for practical deployment in real-world architectural modeling scenarios. Project page: https://tumcms.github.io/BIMgent.github.io/

This study introduces a human-in-the-loop pipeline that converts unscaled, hand-drawn floor plan sketches into semantically consistent 3D BIM models. The workflow leverages multimodal large language models (MLLMs) within a multi-agent framework, combining perceptual extraction, human feedback, schema validation, and automated BIM scripting. Initially, sketches are iteratively refined into a structured JSON layout of walls, doors, and windows. Later, these layouts are transformed into executable scripts that generate 3D BIM models. Experiments on ten diverse floor plans demonstrate strong convergence: openings (doors, windows) are captured with high reliability in the initial pass, while wall detection begins around 83% and achieves near-perfect alignment after a few feedback iterations. Across all categories, precision, recall, and F1 scores remain above 0.83, and geometric errors (RMSE, MAE) progressively decrease to zero through feedback corrections. This study demonstrates how MLLM-driven multi-agent reasoning can make BIM creation accessible to both experts and non-experts using only freehand sketches.

Existing indoor SLAM datasets primarily focus on robot sensing, often lacking building architectures. To address this gap, we design and construct the first dataset to couple the SLAM and BIM, named SLABIM. This dataset provides BIM and SLAM-oriented sensor data, both modeling a university building at HKUST. The as-designed BIM is decomposed and converted for ease of use. We employ a multi-sensor suite for multi-session data collection and mapping to obtain the as-built model. All the related data are timestamped and organized, enabling users to deploy and test effectively. Furthermore, we deploy advanced methods and report the experimental results on three tasks: registration, localization and semantic mapping, demonstrating the effectiveness and practicality of SLABIM. We make our dataset open-source at https://github.com/HKUST-Aerial-Robotics/SLABIM.

Large language models (LLMs) are widely used to generate structured outputs such as JSON, SQL, and code, yet public resources remain limited for evaluating generation that must simultaneously satisfy industry-standard XML and domain vocabulary constraints. This paper presents Ishigaki-IDS-Bench, a benchmark for evaluating the ability to generate Information Delivery Specification (IDS) XML from Building Information Modeling (BIM) information requirements. The benchmark contains 166 BIM/IDS expert-authored and verified examples created by expanding 83 practical scenarios into Japanese and English, corresponding gold IDS files, and metadata for input format, language, turn setting, IFC version, and construction domain. Its evaluation combines IDSAuditTool-based Processability, Structure, and Content audits with content-agreement evaluation against gold IDS files. In zero-shot evaluation over 10 LLMs, the best model reaches 65.6% macro F1 for content agreement, while only 27.7% of outputs pass the Content audit. These results show that current LLMs can express part of the information requirements as IDS, but still struggle to stably generate XML that satisfies the IDS standard and IFC vocabulary constraints. Ishigaki-IDS-Bench supports comparative evaluation, failure analysis, and the development of constrained structured generation methods that conform to domain standards. We release the evaluation scripts and benchmark data under the CC BY 4.0 license on GitHub and Hugging Face.

Large language models (LLMs), as a novel information technology, are seeing increasing adoption in the Architecture, Engineering, and Construction (AEC) field. They have shown their potential to streamline processes throughout the building lifecycle. However, the robustness and reliability of LLMs in such a specialized and safety-critical domain remain to be evaluated. To address this challenge, this paper establishes AECBench, a comprehensive benchmark designed to quantify the strengths and limitations of current LLMs in the AEC domain. The benchmark defines 23 representative tasks within a five-level cognition-oriented evaluation framework encompassing Knowledge Memorization, Understanding, Reasoning, Calculation, and Application. These tasks were derived from authentic AEC practice, with scope ranging from codes retrieval to specialized documents generation. Subsequently, a 4,800-question dataset encompassing diverse formats, including open-ended questions, was crafted primarily by engineers and validated through a two-round expert review. Furthermore, an LLM-as-a-Judge approach was introduced to provide a scalable and consistent methodology for evaluating complex, long-form responses leveraging expert-derived rubrics. Through the evaluation of nine LLMs, a clear performance decline across five cognitive levels was revealed. Despite demonstrating proficiency in foundational tasks at the Knowledge Memorization and Understanding levels, the models showed significant performance deficits, particularly in interpreting knowledge from tables in building codes, executing complex reasoning and calculation, and generating domain-specific documents. Consequently, this study lays the groundwork for future research and development aimed at the robust and reliable integration of LLMs into safety-critical engineering practices.

Structural modeling is a fundamental component of computational engineering science, in which even minor physical inconsistencies or specification violations may invalidate downstream simulations. The potential of large language models (LLMs) for automatic generation of modeling code has been demonstrated. However, non-executable or physically inconsistent outputs remain prevalent under stringent engineering constraints. A framework for physics-consistent automatic building modeling is therefore proposed, integrating domain knowledge construction, constraint-oriented model alignment, and verification-driven evaluation. CivilInstruct is introduced as a domain-specific dataset that formalizes structural engineering knowledge and constraint reasoning to enable simulation-ready model generation. A two-stage fine-tuning strategy is further employed to enforce constraint satisfaction and application programming interface compliance, substantially reducing hallucinated and non-conforming outputs. MBEval is presented as a verification-driven benchmark that evaluates executability and structural dynamics consistency through closed-loop validation. Experimental results show consistent improvements over baselines across rigorous verification metrics. Our code is available at https://github.com/Jovanqing/AutoBM.

This paper introduces a new approach to extract and analyze vector data from technical drawings in PDF format. Our method involves converting PDF files into SVG format and creating a feature-rich graph representation, which captures the relationships between vector entities using geometrical information. We then apply a graph attention transformer with hierarchical label definition to achieve accurate line-level segmentation. Our approach is evaluated on two datasets, including the public FloorplanCAD dataset, which achieves state-of-the-art results on weighted F1 score, surpassing existing methods. The proposed vector-based method offers a more scalable solution for large-scale technical drawing analysis compared to vision-based approaches, while also requiring significantly less GPU power than current state-of-the-art vector-based techniques. Moreover, it demonstrates improved performance in terms of the weighted F1 (wF1) score on the semantic segmentation task. Our results demonstrate the effectiveness of our approach in extracting meaningful information from technical drawings, enabling new applications, and improving existing workflows in the AEC industry. Potential applications of our approach include automated building information modeling (BIM) and construction planning, which could significantly impact the efficiency and productivity of the industry.

3D building models are critical for applications in architecture, energy simulation, and navigation. Yet, generating accurate and semantically rich 3D buildings automatically remains a major challenge due to the lack of large-scale annotated datasets in the public domain. Inspired by the success of synthetic data in computer vision, we introduce SYNBUILD-3D, a large, diverse, and multi-modal dataset of over 6.2 million synthetic 3D residential buildings at Level of Detail (LoD) 4. In the dataset, each building is represented through three distinct modalities: a semantically enriched 3D wireframe graph at LoD 4 (Modality I), the corresponding floor plan images (Modality II), and a LiDAR-like roof point cloud (Modality III). The semantic annotations for each building wireframe are derived from the corresponding floor plan images and include information on rooms, doors, and windows. Through its tri-modal nature, future work can use SYNBUILD-3D to develop novel generative AI algorithms that automate the creation of 3D building models at LoD 4, subject to predefined floor plan layouts and roof geometries, while enforcing semantic-geometric consistency. Dataset and code samples are publicly available at https://github.com/kdmayer/SYNBUILD-3D.

Building properties, such as height, usage, and material composition, play a crucial role in spatial data infrastructures, supporting applications such as energy simulation, risk assessment, and environmental modeling. Despite their importance, comprehensive and high-quality building attribute data remain scarce in many urban areas. Recent advances have enabled the extraction and tagging of objective building attributes using remote sensing and street-level imagery. However, establishing a method and pipeline that integrates diverse open datasets, acquires holistic building imagery at scale, and infers comprehensive building attributes remains a significant challenge. Among the first, this study bridges the gaps by introducing OpenFACADES, an open framework that leverages multimodal crowdsourced data to enrich building profiles with both objective attributes and semantic descriptors through multimodal large language models. Our methodology proceeds in three major steps. First, we integrate street-level image metadata from Mapillary with OpenStreetMap geometries via isovist analysis, effectively identifying images that provide suitable vantage points for observing target buildings. Second, we automate the detection of building facades in panoramic imagery and tailor a reprojection approach to convert objects into holistic perspective views that approximate real-world observation. Third, we introduce an innovative approach that harnesses and systematically investigates the capabilities of open-source large vision-language models (VLMs) for multi-attribute prediction and open-vocabulary captioning in building-level analytics, leveraging a globally sourced dataset of 30,180 labeled images from seven cities. Evaluation shows that fine-tuned VLM excel in multi-attribute inference, outperforming single-attribute computer vision models and zero-shot ChatGPT-4o.

The detection of façade elements on buildings, such as doors, windows, balconies, air conditioning units, billboards, and glass curtain walls, is a critical step in automating the creation of Building Information Modeling (BIM). Yet, this field faces significant challenges, including the uneven distribution of façade elements, the presence of small objects, and substantial background noise, which hamper detection accuracy. To address these issues, we develop the BFA-YOLO model and the BFA-3D dataset in this study. The BFA-YOLO model is an advanced architecture designed specifically for analyzing multi-view images of façade attachments. It integrates three novel components: the Feature Balanced Spindle Module (FBSM) that tackles the issue of uneven object distribution; the Target Dynamic Alignment Task Detection Head (TDATH) that enhances the detection of small objects; and the Position Memory Enhanced Self-Attention Mechanism (PMESA), aimed at reducing the impact of background noise. These elements collectively enable BFA-YOLO to effectively address each challenge, thereby improving model robustness and detection precision. The BFA-3D dataset, offers multi-view images with precise annotations across a wide range of façade attachment categories. This dataset is developed to address the limitations present in existing façade detection datasets, which often feature a single perspective and insufficient category coverage. Through comparative analysis, BFA-YOLO demonstrated improvements of 1.8\% and 2.9\% in mAP_{50} on the BFA-3D dataset and the public Façade-WHU dataset, respectively, when compared to the baseline YOLOv8 model. These results highlight the superior performance of BFA-YOLO in façade element detection and the advancement of intelligent BIM technologies.

Urban Building Energy Modeling plays a critical role in achieving the United Nations' Sustainable Development Goals 7 and 11. Although existing studies based on satellite imagery and deep learning have achieved remarkable progress, many challenges exist: most existing studies are inherently predictive, failing to reflect the generative nature of urban planning; although generative AI and diffusion models have seen explosive growth in satellite imagery, they lack the urban functional generation (e.g., energy layer); third, aligned high-quality high-resolution building energy data with satellite imagery is limited and scarce. Here we propose SENSE (Satellite-based ENergy Synthesis for Sustainable Environment), a unified generative UBEM framework that jointly synthesizes realistic urban satellite imagery and aligned high-quality building energy consumption and height maps. By conditioning on road networks and urban density metrics, SENSE, based on a controllable diffusion model, leverages the knowledge learned by large vision models to generate urban building energy consumption and height information (annotations) in the latent space. Experiments across four cities (New York City, Boston, Lyon, Busan) demonstrate that SENSE achieves high visual fidelity and strong physical consistency, satisfying the ASHRAE standard metric. Experiments demonstrate that SENSE can generate enough annotated synthetic data using less than 20% labeled energy data, boosting downstream prediction performance by 10% IoU. Compared to SOTA urban energy prediction methods, SENSE significantly reduced prediction error (reduced 3%-11% NMBE and 1%-9% CVRMSE). This study offers an energy-efficiency urban planning and physical generation solution for urban science, energy science and building science. The dataset and code: https://huggingface.co/datasets/skl24/MUSE and https://github.com/kailaisun/GenAI4Urban-Energy/.

Today's architectural engineering and construction (AEC) software require a learning curve to generate a three-dimension building representation. This limits the ability to quickly validate the volumetric implications of an initial design idea communicated via a single sketch. Allowing designers to translate a single sketch to a 3D building will enable owners to instantly visualize 3D project information without the cognitive load required. If previous state-of-the-art (SOTA) data-driven methods for single view reconstruction (SVR) showed outstanding results in the reconstruction process from a single image or sketch, they lacked specific applications, analysis, and experiments in the AEC. Therefore, this research addresses this gap, introducing the first deep learning method focused only on buildings that aim to convert a single sketch to a 3D building mesh: Vitruvio. Vitruvio adapts Occupancy Network for SVR tasks on a specific building dataset (Manhattan 1K). This adaptation brings two main improvements. First, it accelerates the inference process by more than 26% (from 0.5s to 0.37s). Second, it increases the reconstruction accuracy (measured by the Chamfer Distance) by 18%. During this adaptation in the AEC domain, we evaluate the effect of the building orientation in the learning procedure since it constitutes an important design factor. While aligning all the buildings to a canonical pose improved the overall quantitative metrics, it did not capture fine-grain details in more complex building shapes (as shown in our qualitative analysis). Finally, Vitruvio outputs a 3D-printable building mesh with arbitrary topology and genus from a single perspective sketch, providing a step forward to allow owners and designers to communicate 3D information via a 2D, effective, intuitive, and universal communication medium: the sketch.

Architectural Knowledge Management (AKM) is crucial for software development but remains challenging due to the lack of standardization and high manual effort. Architecture Decision Records (ADRs) provide a structured approach to capture Architecture Design Decisions (ADDs), but their adoption is limited due to the manual effort involved and insufficient tool support. Our previous work has shown that Large Language Models (LLMs) can assist in generating ADDs. However, simply prompting the LLM does not produce quality ADDs. Moreover, using third-party LLMs raises privacy concerns, while self-hosting them poses resource challenges. To this end, we experimented with different approaches like few-shot, retrieval-augmented generation (RAG) and fine-tuning to enhance LLM's ability to generate ADDs. Our results show that both techniques improve effectiveness. Building on this, we propose Domain Specific Retreival Augumented Few Shot Fine Tuninng, DRAFT, which combines the strengths of all these three approaches for more effective ADD generation. DRAFT operates in two phases: an offline phase that fine-tunes an LLM on generating ADDs augmented with retrieved examples and an online phase that generates ADDs by leveraging retrieved ADRs and the fine-tuned model. We evaluated DRAFT against existing approaches on a dataset of 4,911 ADRs and various LLMs and analyzed them using automated metrics and human evaluations. Results show DRAFT outperforms all other approaches in effectiveness while maintaining efficiency. Our findings indicate that DRAFT can aid architects in drafting ADDs while addressing privacy and resource constraints.

Architectural spatial intelligence, the ability to recognize and infer architectural space, is fundamental to tasks such as robot navigation, embodied interaction, and 3D scene understanding and generation. Although extensive research has evaluated the basic spatial skills of Vision-Language Models (VLMs) such as relative orientation, distance comparison, and object counting, these tasks cover only the most elementary levels of spatial cognition and largely overlook higher-level cognition of architectural space, including layout understanding, circulation patterns, and functional zoning. In this work, we present ArchSIBench, a Benchmark for Architectural Spatial Intelligence based on the perspectives from architecture, cognitive science, and psychology. ArchSIBench covers five core dimensions: perception, reasoning, navigation, transformation, and configuration, comprising 17 fine-grained subtasks. Through careful manual annotation by experts with architectural backgrounds, we construct 3,000 question-answer pairs to enable comprehensive evaluation of architectural spatial intelligence. Based on ArchSIBench, we evaluate various VLMs and find that the architectural spatial intelligence of most models shows significant differences from human baselines; additionally, models exhibit substantial variability across capability dimensions. Some state-of-the-art models can approach the level of human evaluators without architectural training. However, a clear gap remains compared to human evaluators with architectural training, particularly in spatial transformation and configuration reasoning. We believe that ArchSIBench will provide important insights and systematic resources for measuring and advancing the architectural spatial intelligence of VLMs. The dataset and code are available at https://huggingface.co/datasets/ArchSIBench/ArchSIBench.

Automating planning with LLMs presents transformative opportunities for traditional industries, yet remains underexplored. In commercial construction, the complexity of automated scheduling often requires manual intervention to ensure precision. We propose CONSTRUCTA, a novel framework leveraging LLMs to optimize construction schedules in complex projects like semiconductor fabrication. CONSTRUCTA addresses key challenges by: (1) integrating construction-specific knowledge through static RAG; (2) employing context-sampling techniques inspired by architectural expertise to provide relevant input; and (3) deploying Construction DPO to align schedules with expert preferences using RLHF. Experiments on proprietary data demonstrate performance improvements of +42.3% in missing value prediction, +79.1% in dependency analysis, and +28.9% in automated planning compared to baseline methods, showcasing its potential to revolutionize construction workflows and inspire domain-specific LLM advancements.

Volunteer Geographic Information (VGI), with its rich variety, large volume, rapid updates, and diverse sources, has become a critical source of geospatial data. However, VGI data from platforms like OSM exhibit significant quality heterogeneity across different data types, particularly with urban building data. To address this, we propose a multi-source geographic data transformation solution, utilizing accessible and complete VGI data to assist in generating urban building footprint data. We also employ a multimodal data generation framework to improve accuracy. First, we introduce a pipeline for constructing an 'image-text-metadata-building footprint' dataset, primarily based on road network data and supplemented by other multimodal data. We then present ControlCity, a geographic data transformation method based on a multimodal diffusion model. This method first uses a pre-trained text-to-image model to align text, metadata, and building footprint data. An improved ControlNet further integrates road network and land-use imagery, producing refined building footprint data. Experiments across 22 global cities demonstrate that ControlCity successfully simulates real urban building patterns, achieving state-of-the-art performance. Specifically, our method achieves an average FID score of 50.94, reducing error by 71.01% compared to leading methods, and a MIoU score of 0.36, an improvement of 38.46%. Additionally, our model excels in tasks like urban morphology transfer, zero-shot city generation, and spatial data completeness assessment. In the zero-shot city task, our method accurately predicts and generates similar urban structures, demonstrating strong generalization. This study confirms the effectiveness of our approach in generating urban building footprint data and capturing complex city characteristics.

Accurate mapping of the built asset information to established data classification systems and taxonomies is crucial for effective asset management, whether for compliance at project handover or ad-hoc data integration scenarios. Due to the complex nature of built asset data, which predominantly comprises technical text elements, this process remains largely manual and reliant on domain expert input. Recent breakthroughs in contextual text representation learning (text embedding), particularly through pre-trained large language models, offer promising approaches that can facilitate the automation of cross-mapping of the built asset data. However, no comprehensive evaluation has yet been conducted to assess these models' ability to effectively represent the complex semantics specific to built asset technical terminology. This study presents a comparative benchmark of state-of-the-art text embedding models to evaluate their effectiveness in aligning built asset information with domain-specific technical concepts. Our proposed datasets are derived from two renowned built asset data classification dictionaries. The results of our benchmarking across six proposed datasets, covering three tasks of clustering, retrieval, and reranking, highlight the need for future research on domain adaptation techniques. The benchmarking resources are published as an open-source library, which will be maintained and extended to support future evaluations in this field.

Engineering construction automation aims to transform natural language specifications into physically viable structures, requiring complex integrated reasoning under strict physical constraints. While modern LLMs possess broad knowledge and strong reasoning capabilities that make them promising candidates for this domain, their construction competencies remain largely unevaluated. To address this gap, we introduce BuildArena, the first physics-aligned interactive benchmark designed for language-driven engineering construction. It contributes to the community in four aspects: (1) a highly customizable benchmarking framework for in-depth comparison and analysis of LLMs; (2) an extendable task design strategy spanning static and dynamic mechanics across multiple difficulty tiers; (3) a 3D Spatial Geometric Computation Library for supporting construction based on language instructions; (4) a baseline LLM agentic workflow that effectively evaluates diverse model capabilities. On eight frontier LLMs, BuildArena comprehensively evaluates their capabilities for language-driven and physics-grounded construction automation. The project page is at https://build-arena.github.io/.

Computer-aided design (CAD) is vital to modern manufacturing, yet model creation remains labor-intensive and expertise-heavy. To enable non-experts to translate intuitive design intent into manufacturable artifacts, recent large language models-based text-to-CAD efforts focus on command sequences or script-based formats like CadQuery. However, these formats are kernel-dependent and lack universality for manufacturing. In contrast, the Standard for the Exchange of Product Data (STEP, ISO 10303) file is a widely adopted, neutral boundary representation (B-rep) format directly compatible with manufacturing, but its graph-structured, cross-referenced nature poses unique challenges for auto-regressive LLMs. To address this, we curate a dataset of ~40K STEP-caption pairs and introduce novel preprocessing tailored for the graph-structured format of STEP, including a depth-first search-based reserialization that linearizes cross-references while preserving locality and chain-of-thought(CoT)-style structural annotations that guide global coherence. We integrate retrieval-augmented generation to ground predictions in relevant examples for supervised fine-tuning, and refine generation quality through reinforcement learning with a specific Chamfer Distance-based geometric reward. Experiments demonstrate consistent gains of our STEP-LLM in geometric fidelity over the Text2CAD baseline, with improvements arising from multiple stages of our framework: the RAG module substantially enhances completeness and renderability, the DFS-based reserialization strengthens overall accuracy, and the RL further reduces geometric discrepancy. Both metrics and visual comparisons confirm that STEP-LLM generates shapes with higher fidelity than Text2CAD. These results show the feasibility of LLM-driven STEP model generation from natural language, showing its potential to democratize CAD design for manufacturing.

Indoor navigation remains a critical challenge for people with visual impairments. The current solutions mainly rely on infrastructure-based systems, which limit their ability to navigate safely in dynamic environments. We propose a novel navigation approach that utilizes a foundation model to transform floor plans into navigable knowledge graphs and generate human-readable navigation instructions. Floorplan2Guide integrates a large language model (LLM) to extract spatial information from architectural layouts, reducing the manual preprocessing required by earlier floorplan parsing methods. Experimental results indicate that few-shot learning improves navigation accuracy in comparison to zero-shot learning on simulated and real-world evaluations. Claude 3.7 Sonnet achieves the highest accuracy among the evaluated models, with 92.31%, 76.92%, and 61.54% on the short, medium, and long routes, respectively, under 5-shot prompting of the MP-1 floor plan. The success rate of graph-based spatial structure is 15.4% higher than that of direct visual reasoning among all models, which confirms that graphical representation and in-context learning enhance navigation performance and make our solution more precise for indoor navigation of Blind and Low Vision (BLV) users.

Recent advancements in large language models (LLMs) have driven a revolutionary paradigm shift in process automation from Robotic Process Automation to Agentic Process Automation by automating the workflow orchestration procedure based on LLMs. However, existing LLMs (even the advanced OpenAI GPT-4o) are confined to achieving satisfactory capability in workflow orchestration. To address this limitation, we present WorkflowLLM, a data-centric framework elaborately designed to enhance the capability of LLMs in workflow orchestration. It first constructs a large-scale fine-tuning dataset WorkflowBench with 106,763 samples, covering 1,503 APIs from 83 applications across 28 categories. Specifically, the construction process can be divided into three phases: (1) Data Collection: we collect real-world workflow data from Apple Shortcuts and RoutineHub, transcribing them into Python-style code. We further equip them with generated hierarchical thought via ChatGPT. (2) Query Expansion: we prompt ChatGPT to generate more task queries to enrich the diversity and complexity of workflows. (3) Workflow Generation: we leverage an annotator model trained on collected data to generate workflows for synthesized queries. Finally, we merge the synthetic samples that pass quality confirmation with the collected samples to obtain the WorkflowBench. Based on WorkflowBench, we fine-tune Llama-3.1-8B to obtain WorkflowLlama. Our experiments show that WorkflowLlama demonstrates a strong capacity to orchestrate complex workflows, while also achieving notable generalization performance on previously unseen APIs. Additionally, WorkflowBench exhibits robust zero-shot generalization capabilities on an out-of-distribution task planning dataset, T-Eval. Our data and code are available at https://github.com/OpenBMB/WorkflowLLM.

In this work, we propose HypergraphFormer, a novel and efficient approach to floor plan generation based on learning hypergraph representations with a large language model (LLM). The model is trained via supervised fine-tuning to generate a hypergraph-based textual representation that encodes spatial relationships and connectivity information within floor plans. We train and evaluate our approach on the RPLAN dataset, and further demonstrate its generalizability on a separate out-of-distribution dataset, which we release in this paper. Our method outperforms state-of-the-art techniques based on rasterized or vectorized representations across a diverse set of metrics. We also show improved data efficiency, particularly under distribution shift. The hypergraph formulation enables the generation of floor plans for arbitrary, irregular, user-specified boundaries by decoupling apartment footprints from their functional and geometric subdivisions. Furthermore, we show that the proposed methodology offers a high degree of editability, making it particularly well suited to design-oriented workflows supported by LLMs.

Computer-Aided Design (CAD) models are defined by their construction history: a parametric recipe that encodes design intent. However, existing large-scale 3D datasets predominantly consist of boundary representations (B-Reps) or meshes, stripping away this critical procedural information. To address this scarcity, we introduce Zero-to-CAD, a scalable framework for synthesizing executable CAD construction sequences. We frame synthesis as an agentic search problem: by embedding a large language model (LLM) within a feedback-driven CAD environment, our system iteratively generates, executes, and validates code using tools and documentation lookup to promote geometric validity and operation diversity. This agentic approach enables the synthesis of approximately one million executable, readable, editable CAD sequences, covering a rich vocabulary of operations beyond sketch-and-extrude workflows. We also release a curated subset of 100,000 high-quality models selected for geometric diversity. To demonstrate the dataset's utility, we fine-tune a vision-language model on our synthetic data to reconstruct editable CAD programs from multi-view images, outperforming strong baselines, including GPT-5.2, and effectively bootstrapping sequence generation capabilities without real construction-history training data. Zero-to-CAD bridges the gap between geometric scale and parametric interpretability, offering a vital resource for the next generation of CAD AI.

Modeling and designing urban building layouts is of significant interest in computer vision, computer graphics, and urban applications. A building layout consists of a set of buildings in city blocks defined by a network of roads. We observe that building layouts are discrete structures, consisting of multiple rows of buildings of various shapes, and are amenable to skeletonization for mapping arbitrary city block shapes to a canonical form. Hence, we propose a fully automatic approach to building layout generation using graph attention networks. Our method generates realistic urban layouts given arbitrary road networks, and enables conditional generation based on learned priors. Our results, including user study, demonstrate superior performance as compared to prior layout generation networks, support arbitrary city block and varying building shapes as demonstrated by generating layouts for 28 large cities.

Computer-aided design (CAD) tools are utilized in the manufacturing industry for modeling everything from cups to spacecraft. These programs are complex to use and typically require years of training and experience to master. Structured and well-constrained 2D sketches and 3D constructions are crucial components of CAD modeling. A well-executed CAD model can be seamlessly integrated into the manufacturing process, thereby enhancing production efficiency. Deep generative models of 3D shapes and 3D object reconstruction models have garnered significant research interest. However, most of these models produce discrete forms of 3D objects that are not editable. Moreover, the few models based on CAD operations often have substantial input restrictions. In this work, we fine-tuned pre-trained models to create OpenECAD models (0.55B, 0.89B, 2.4B and 3.1B), leveraging the visual, logical, coding, and general capabilities of visual language models. OpenECAD models can process images of 3D designs as input and generate highly structured 2D sketches and 3D construction commands, ensuring that the designs are editable. These outputs can be directly used with existing CAD tools' APIs to generate project files. To train our network, we created a series of OpenECAD datasets. These datasets are derived from existing public CAD datasets, adjusted and augmented to meet the specific requirements of vision language model (VLM) training. Additionally, we have introduced an approach that utilizes dependency relationships to define and generate sketches, further enriching the content and functionality of the datasets.

Addressing a structural-engineering request requires more than a single answer; it requires a chain of interdependent artifacts: interpreted requirements, a computable model, validation records, solver outputs, code-check records, and a final report. Evaluations centered on question answering or script generation rarely verify this complete evidence chain and may therefore reward fluent outputs even when the underlying engineering workflow is incomplete, internally inconsistent, or non-executable. To address this limitation, we present StructureClaw, an artifact-centered workbench in which LLM agents operate through governed engineering skills, typed tools, shared artifact state, and local analysis backends. We also introduce StructureClaw-Bench, an executable benchmark of 150 controlled scenarios spanning standard workflow execution, interactive robustness, and multimodal structural-model reconstruction. A scenario succeeds only when all required artifact- and execution-level assertions pass in a single run. Across ten agent-model configurations, each evaluated on the same 50 standard cases, the average Success Rate rises from 56.8% with the generic-skill baseline to 88.6% with the full automatic workflow. The interactive and multimodal evaluations identify two prominent remaining challenges: safe handling of invalid numerical inputs and fixture-consistent reconstruction of structural models. These findings show that artifact-centered evaluation can expose workflow-level failures that are difficult to identify from final responses alone, providing a more rigorous basis for evaluating and improving structural-engineering agents. The code and benchmark are available at https://github.com/structureclaw/structureclaw.

Ensuring the safety, quality, and timely completion of construction projects is paramount, with construction inspections serving as a vital instrument towards these goals. Nevertheless, the predominantly manual approach of present-day inspections frequently results in inefficiencies and inadequate information management. Such methods often fall short of providing holistic, exhaustive assessments, consequently engendering regulatory oversights and potential safety hazards. To address this issue, this paper presents a novel framework named AutoRepo for automated generation of construction inspection reports. The unmanned vehicles efficiently perform construction inspections and collect scene information, while the multimodal large language models (LLMs) are leveraged to automatically generate the inspection reports. The framework was applied and tested on a real-world construction site, demonstrating its potential to expedite the inspection process, significantly reduce resource allocation, and produce high-quality, regulatory standard-compliant inspection reports. This research thus underscores the immense potential of multimodal large language models in revolutionizing construction inspection practices, signaling a significant leap forward towards a more efficient and safer construction management paradigm.

We introduce GlobalBuildingAtlas, a publicly available dataset providing global and complete coverage of building polygons, heights and Level of Detail 1 (LoD1) 3D building models. This is the first open dataset to offer high quality, consistent, and complete building data in 2D and 3D form at the individual building level on a global scale. Towards this dataset, we developed machine learning-based pipelines to derive building polygons and heights (called GBA.Height) from global PlanetScope satellite data, respectively. Also a quality-based fusion strategy was employed to generate higher-quality polygons (called GBA.Polygon) based on existing open building polygons, including our own derived one. With more than 2.75 billion buildings worldwide, GBA.Polygon surpasses the most comprehensive database to date by more than 1 billion buildings. GBA.Height offers the most detailed and accurate global 3D building height maps to date, achieving a spatial resolution of 3x3 meters-30 times finer than previous global products (90 m), enabling a high-resolution and reliable analysis of building volumes at both local and global scales. Finally, we generated a global LoD1 building model (called GBA.LoD1) from the resulting GBA.Polygon and GBA.Height. GBA.LoD1 represents the first complete global LoD1 building models, including 2.68 billion building instances with predicted heights, i.e., with a height completeness of more than 97%, achieving RMSEs ranging from 1.5 m to 8.9 m across different continents. With its height accuracy, comprehensive global coverage and rich spatial details, GlobalBuildingAltas offers novel insights on the status quo of global buildings, which unlocks unprecedented geospatial analysis possibilities, as showcased by a better illustration of where people live and a more comprehensive monitoring of the progress on the 11th Sustainable Development Goal of the United Nations.

Buildings are primary components of cities, often featuring repeated elements such as windows and doors. Traditional 3D building asset creation is labor-intensive and requires specialized skills to develop design rules. Recent generative models for building creation often overlook these patterns, leading to low visual fidelity and limited scalability. Drawing inspiration from procedural modeling techniques used in the gaming and visual effects industry, our method, Proc-GS, integrates procedural code into the 3D Gaussian Splatting (3D-GS) framework, leveraging their advantages in high-fidelity rendering and efficient asset management from both worlds. By manipulating procedural code, we can streamline this process and generate an infinite variety of buildings. This integration significantly reduces model size by utilizing shared foundational assets, enabling scalable generation with precise control over building assembly. We showcase the potential for expansive cityscape generation while maintaining high rendering fidelity and precise control on both real and synthetic cases.

We present app.build (https://github.com/appdotbuild/agent/), an open-source framework that improves LLM-based application generation through systematic validation and structured environments. Our approach combines multi-layered validation pipelines, stack-specific orchestration, and model-agnostic architecture, implemented across three reference stacks. Through evaluation on 30 generation tasks, we demonstrate that comprehensive validation achieves 73.3% viability rate with 30% reaching perfect quality scores, while open-weights models achieve 80.8% of closed-model performance when provided structured environments. The open-source framework has been adopted by the community, with over 3,000 applications generated to date. This work demonstrates that scaling reliable AI agents requires scaling environments, not just models -- providing empirical insights and complete reference implementations for production-oriented agent systems.

We address 2D floorplan reconstruction from 3D scans. Existing approaches typically employ heuristically designed multi-stage pipelines. Instead, we formulate floorplan reconstruction as a single-stage structured prediction task: find a variable-size set of polygons, which in turn are variable-length sequences of ordered vertices. To solve it we develop a novel Transformer architecture that generates polygons of multiple rooms in parallel, in a holistic manner without hand-crafted intermediate stages. The model features two-level queries for polygons and corners, and includes polygon matching to make the network end-to-end trainable. Our method achieves a new state-of-the-art for two challenging datasets, Structured3D and SceneCAD, along with significantly faster inference than previous methods. Moreover, it can readily be extended to predict additional information, i.e., semantic room types and architectural elements like doors and windows. Our code and models are available at: https://github.com/ywyue/RoomFormer.

Building Footprint Extraction (BFE) from off-nadir aerial images often involves roof segmentation and offset prediction to adjust roof boundaries to the building footprint. However, this multi-stage approach typically produces low-quality results, limiting its applicability in real-world data production. To address this issue, we present OBMv2, an end-to-end and promptable model for polygonal footprint prediction. Unlike its predecessor OBM, OBMv2 introduces a novel Self Offset Attention (SOFA) mechanism that improves performance across diverse building types, from bungalows to skyscrapers, enabling end-to-end footprint prediction without post-processing. Additionally, we propose a Multi-level Information System (MISS) to effectively leverage roof masks, building masks, and offsets for accurate footprint prediction. We evaluate OBMv2 on the BONAI and OmniCity-view3 datasets and demonstrate its generalization on the Huizhou test set. The code will be available at https://github.com/likaiucas/OBMv2.

We introduce a learning framework for automated floorplan generation which combines generative modeling using deep neural networks and user-in-the-loop designs to enable human users to provide sparse design constraints. Such constraints are represented by a layout graph. The core component of our learning framework is a deep neural network, Graph2Plan, which converts a layout graph, along with a building boundary, into a floorplan that fulfills both the layout and boundary constraints. Given an input building boundary, we allow a user to specify room counts and other layout constraints, which are used to retrieve a set of floorplans, with their associated layout graphs, from a database. For each retrieved layout graph, along with the input boundary, Graph2Plan first generates a corresponding raster floorplan image, and then a refined set of boxes representing the rooms. Graph2Plan is trained on RPLAN, a large-scale dataset consisting of 80K annotated floorplans. The network is mainly based on convolutional processing over both the layout graph, via a graph neural network (GNN), and the input building boundary, as well as the raster floorplan images, via conventional image convolution.

Parametric Computer-Aided Design (CAD) is central to contemporary mechanical design. However, it encounters challenges in achieving precise parametric sketch modeling and lacks practical evaluation metrics suitable for mechanical design. We harness the capabilities of pre-trained foundation models, renowned for their successes in natural language processing and computer vision, to develop generative models specifically for CAD. These models are adept at understanding complex geometries and design reasoning, a crucial advancement in CAD technology. In this paper, we propose CadVLM, an end-to-end vision language model for CAD generation. Our approach involves adapting pre-trained foundation models to manipulate engineering sketches effectively, integrating both sketch primitive sequences and sketch images. Extensive experiments demonstrate superior performance on multiple CAD sketch generation tasks such as CAD autocompletion, CAD autoconstraint, and image conditional generation. To our knowledge, this is the first instance of a multimodal Large Language Model (LLM) being successfully applied to parametric CAD generation, representing a pioneering step in the field of computer-aided mechanical design.

For decades, data engineering has developed mature architectural principles for integrating, governing, validating, cataloging, and serving organizational data. The rise of large language models does not eliminate these concerns; it exposes a broader version of them. Organizational knowledge is becoming executable infrastructure: systems increasingly retrieve it, assemble it, reason over it, and act on it. This paper argues that enterprise artificial intelligence (AI) systems suggest a transition toward an architectural discipline for representing, maintaining, governing, and operationally delivering organizational knowledge. We refer to this discipline as knowledge architecture. We offer a conceptual model and taxonomy showing how classical data-engineering guarantees must be redefined when the managed unit shifts from records to knowledge artifacts: extract, transform, and load (ETL) becomes knowledge ingestion, change-data capture (CDC) becomes knowledge change detection, lineage becomes provenance, catalogs become knowledge catalogs, materialized views become knowledge views, and medallion architectures become raw--curated--operational knowledge layers. Emerging formats such as large language model (LLM) Wiki and the Open Knowledge Format (OKF) are treated as early evidence of this transition, not as its endpoint. The central claim is that knowledge architecture becomes useful when organizational knowledge ceases to be a passive information resource and becomes an operational asset used by humans, agents, workflows, and models to execute work.

Computer-aided design (CAD) significantly enhances the efficiency, accuracy, and innovation of design processes by enabling precise 2D and 3D modeling, extensive analysis, and optimization. Existing methods for creating CAD models rely on latent vectors or point clouds, which are difficult to obtain and costly to store. Recent advances in Multimodal Large Language Models (MLLMs) have inspired researchers to use natural language instructions and images for CAD model construction. However, these models still struggle with inferring accurate 3D spatial location and orientation, leading to inaccuracies in determining the spatial 3D starting points and extrusion directions for constructing geometries. This work introduces CAD-GPT, a CAD synthesis method with spatial reasoning-enhanced MLLM that takes either a single image or a textual description as input. To achieve precise spatial inference, our approach introduces a 3D Modeling Spatial Mechanism. This method maps 3D spatial positions and 3D sketch plane rotation angles into a 1D linguistic feature space using a specialized spatial unfolding mechanism, while discretizing 2D sketch coordinates into an appropriate planar space to enable precise determination of spatial starting position, sketch orientation, and 2D sketch coordinate translations. Extensive experiments demonstrate that CAD-GPT consistently outperforms existing state-of-the-art methods in CAD model synthesis, both quantitatively and qualitatively.

Traditional foundation models are pre-trained on broad datasets to reduce the training resources (e.g., time, energy, labeled samples) needed for fine-tuning a wide range of downstream tasks. However, traditional foundation models struggle with out-of-distribution prediction and can produce outputs that are unrealistic and physically infeasible. We propose the notation of physics-guided foundation models (PGFM), that is, foundation models integrated with broad or general domain (e.g., scientific) physical knowledge applicable to a wide range of downstream tasks.

Diverse and realistic floor plan data are essential for the development of useful computer-aided methods in architectural design. Today's large-scale floor plan datasets predominantly feature simple floor plan layouts, typically representing single-apartment dwellings only. To compensate for the mismatch between current datasets and the real world, we develop Modified Swiss Dwellings (MSD) -- the first large-scale floor plan dataset that contains a significant share of layouts of multi-apartment dwellings. MSD features over 5.3K floor plans of medium- to large-scale building complexes, covering over 18.9K distinct apartments. We validate that existing approaches for floor plan generation, while effective in simpler scenarios, cannot yet seamlessly address the challenges posed by MSD. Our benchmark calls for new research in floor plan machine understanding. Code and data are open.

Buildings are a central feature of human culture and are increasingly being analyzed with computational methods. However, recent works on computational building understanding have largely focused on natural imagery of buildings, neglecting the fundamental element defining a building's structure -- its floorplan. Conversely, existing works on floorplan understanding are extremely limited in scope, often focusing on floorplans of a single semantic category and region (e.g. floorplans of apartments from a single country). In this work, we introduce WAFFLE, a novel multimodal floorplan understanding dataset of nearly 20K floorplan images and metadata curated from Internet data spanning diverse building types, locations, and data formats. By using a large language model and multimodal foundation models, we curate and extract semantic information from these images and their accompanying noisy metadata. We show that WAFFLE enables progress on new building understanding tasks, both discriminative and generative, which were not feasible using prior datasets. We will publicly release WAFFLE along with our code and trained models, providing the research community with a new foundation for learning the semantics of buildings.

Urban design is a multifaceted process that demands careful consideration of site-specific constraints and collaboration among diverse professionals and stakeholders. The advent of generative artificial intelligence (GenAI) offers transformative potential by improving the efficiency of design generation and facilitating the communication of design ideas. However, most existing approaches are not well integrated with human design workflows. They often follow end-to-end pipelines with limited control, overlooking the iterative nature of real-world design. This study proposes a stepwise generative urban design framework that integrates multimodal diffusion models with human expertise to enable more adaptive and controllable design processes. Instead of generating design outcomes in a single end-to-end process, the framework divides the process into three key stages aligned with established urban design workflows: (1) road network and land use planning, (2) building layout planning, and (3) detailed planning and rendering. At each stage, multimodal diffusion models generate preliminary designs based on textual prompts and image-based constraints, which can then be reviewed and refined by human designers. We design an evaluation framework to assess the fidelity, compliance, and diversity of the generated designs. Experiments using data from Chicago and New York City demonstrate that our framework outperforms baseline models and end-to-end approaches across all three dimensions. This study underscores the benefits of multimodal diffusion models and stepwise generation in preserving human control and facilitating iterative refinements, laying the groundwork for human-AI interaction in urban design solutions.

Doorways and passages are critical structural elements for indoor robot navigation, yet they remain underexplored in modern Visual SLAM (VSLAM) frameworks. This paper presents a passage-aware structural mapping approach for RGB-D VSLAM that detects doors and traversable openings by jointly fusing geometric, semantic, and topological cues. Doors are modeled as planar entities embedded within walls and classified as traversable or non-traversable based on their coplanarity with the supporting wall. Passages are inferred through two complementary strategies: traversal evidence accumulated from camera-wall interactions across consecutive keyframes, and geometric opening validation based on discontinuities in the mapped wall geometry. The proposed method is integrated into vS-Graphs as a proof of concept, enriching its scene graph with passage-level abstractions and improving room connectivity modeling. Qualitative evaluations on indoor office sequences demonstrate reliable doorway detection, and the framework lays the foundation for exploiting these elements in BIM-informed VSLAM. The source code is publicly available at https://github.com/snt-arg/visual_sgraphs/tree/doorway_integration.

Research and practice in Intelligent Design (ID) have significantly enhanced engineering innovation, efficiency, quality, and productivity over recent decades, fundamentally reshaping how engineering designers think, behave, and interact with design processes. The recent emergence of Foundation Models (FMs), particularly Large Language Models (LLMs), has demonstrated general knowledge-based reasoning capabilities, and open new paths and avenues for further transformation in engineering design. In this context, this paper introduces Intelligent Design 4.0 (ID 4.0) as an emerging paradigm empowered by agentic AI systems. We review the historical evolution of ID across four distinct stages: rule-based expert systems, task-specific machine learning models, large-scale foundation AI models, and the recent emerging paradigm of multi-agent collaboration. We propose a conceptual framework for ID 4.0 and discuss its potential to support end-to-end automation of engineering design processes through coordinated, autonomous multi-agent-based systems. Furthermore, we discuss future perspectives to enhance and fully realize ID 4.0's potential, including more complex design scenarios, more practical design implementations, novel agent coordination mechanisms, and autonomous design goal-setting with better human value alignment. In sum, these insights lay a foundation for advancing Intelligent Design toward greater adaptivity, autonomy, and effectiveness in addressing increasingly complex design challenges.

Automatic Compliance Checking (ACC) within the Architecture, Engineering, and Construction (AEC) sector necessitates automating the interpretation of building regulations to achieve its full potential. However, extracting information from textual rules to convert them to a machine-readable format has been a challenge due to the complexities associated with natural language and the limited resources that can support advanced machine-learning techniques. To address this challenge, we introduce CODE-ACCORD, a unique dataset compiled under the EU Horizon ACCORD project. CODE-ACCORD comprises 862 self-contained sentences extracted from the building regulations of England and Finland. Aligned with our core objective of facilitating information extraction from text for machine-readable rule generation, each sentence was annotated with entities and relations. Entities represent specific components such as "window" and "smoke detectors", while relations denote semantic associations between these entities, collectively capturing the conveyed ideas in natural language. We manually annotated all the sentences using a group of 12 annotators. Each sentence underwent annotations by multiple annotators and subsequently careful data curation to finalise annotations, ensuring their accuracy and reliability, thereby establishing the dataset as a solid ground truth. CODE-ACCORD offers a rich resource for diverse machine learning and natural language processing (NLP) related tasks in ACC, including text classification, entity recognition and relation extraction. To the best of our knowledge, this is the first entity and relation-annotated dataset in compliance checking, which is also publicly available.

Text conditioned generative models for images have yielded impressive results. Text conditioned floorplan generation as a special type of raster image generation task also received particular attention. However there are many use cases in floorpla generation where numerical properties of the generated result are more important than the aesthetics. For instance, one might want to specify sizes for certain rooms in a floorplan and compare the generated floorplan with given specifications Current approaches, datasets and commonly used evaluations do not support these kinds of constraints. As such, an attractive strategy is to generate an intermediate data structure that contains numerical properties of a floorplan which can be used to generate the final floorplan image. To explore this setting we (1) construct a new dataset for this data-structure to data-structure formulation of floorplan generation using two popular image based floorplan datasets RPLAN and ProcTHOR-10k, and provide the tools to convert further procedurally generated ProcTHOR floorplan data into our format. (2) We explore the task of floorplan generation given a partial or complete set of constraints and we design a series of metrics and benchmarks to enable evaluating how well samples generated from models respect the constraints. (3) We create multiple baselines by finetuning a large language model (LLM), Llama3, and demonstrate the feasibility of using floorplan data structure conditioned LLMs for the problem of floorplan generation respecting numerical constraints. We hope that our new datasets and benchmarks will encourage further research on different ways to improve the performance of LLMs and other generative modelling techniques for generating designs where quantitative constraints are only partially specified, but must be respected.

This paper introduces the Multi-Step Action Model (MSAM), a closed-source AI model designed by Empsing to address challenges hindering AI adoption in enterprises. Through a holistic examination, this paper explores MSAM's foundational principles, design architecture, and future trajectory. It evaluates MSAM's performance via rigorous testing methodologies and envisions its potential impact on advancing AI adoption within organizations.

In the domain of model-based engineering, models are essential components that enable system design and analysis. Traditionally, the creation of these models has been a manual process requiring not only deep modeling expertise but also substantial domain knowledge of target systems. With the rapid advancement of generative artificial intelligence, large language models (LLMs) show potential for automating model generation. This work explores the generation of instance models using LLMs, focusing specifically on producing XMI-based instance models from Ecore metamodels and natural language specifications. We observe that current LLMs struggle to directly generate valid XMI models. To address this, we propose a two-step approach: first, using LLMs to produce a simplified structured output containing all necessary instance model information, namely a conceptual instance model, and then compiling this intermediate representation into a valid XMI file. The conceptual instance model is format-independent, allowing it to be transformed into various modeling formats via different compilers. The feasibility of the proposed method has been demonstrated using several LLMs, including GPT-4o, o1-preview, Llama 3.1 (8B and 70B). Results show that the proposed method significantly improves the usability of LLMs for instance model generation tasks. Notably, the smaller open-source model, Llama 3.1 70B, demonstrated performance comparable to proprietary GPT models within the proposed framework.

Computer-aided design (CAD) is the backbone of modern industrial design, yet learned CAD generators still fall short of real engineering pipelines: they neither iterate like engineers nor evaluate what engineering requires. Prior work has treated CAD generation as two disjoint steps, part synthesis and assembly, where the former is graded by proximity to a gold reference and the latter, when handled at all, is reduced to a separate constraint solving step. In this work, we introduce a more industry-native task formulation that requires a model to produce a fully assembled multi-part STEP file from a free-form engineering brief, which is then validated via finite element analysis (FEA). FEA validation reveals that Codex (GPT-5.5) and Claude Code (Opus-4.7) agents do not produce a single strict-passing artifact in the main first-attempt sweep, with the best configuration meeting only about 20% of typed requirements on average. Moreover, we introduce two additional supervision signals, a novel text-only blueprint schema and a 21-view image renderer that aids the agent's visual inspection, that better align the generation loop with how engineers iterate in practice. On S2O and Fusion360, the same feedback tools improve geometric reconstruction, with GPT-5.5/xhigh rising from 0.444 to 0.592 Box-IoU on S2O and from 0.397 to 0.505 on Fusion360. Together these signals move CAD programs toward artifacts that are not only visually plausible but also checked against physical and structural requirements.

Mathematical modeling is a cornerstone of scientific discovery and engineering practice, enabling the translation of real-world problems into formal systems across domains such as physics, biology, and economics. Unlike mathematical reasoning, which assumes a predefined formulation, modeling requires open-ended problem analysis, abstraction, and principled formalization. While Large Language Models (LLMs) have shown strong reasoning capabilities, they fall short in rigorous model construction, limiting their utility in real-world problem-solving. To this end, we formalize the task of LLM-powered real-world mathematical modeling, where agents must analyze problems, construct domain-appropriate formulations, and generate complete end-to-end solutions. We introduce MM-Bench, a curated benchmark of 111 problems from the Mathematical Contest in Modeling (MCM/ICM), spanning the years 2000 to 2025 and across ten diverse domains such as physics, biology, and economics. To tackle this task, we propose MM-Agent, an expert-inspired framework that decomposes mathematical modeling into four stages: open-ended problem analysis, structured model formulation, computational problem solving, and report generation. Experiments on MM-Bench show that MM-Agent significantly outperforms baseline agents, achieving an 11.88\% improvement over human expert solutions while requiring only 15 minutes and \$0.88 per task using GPT-4o. Furthermore, under official MCM/ICM protocols, MM-Agent assisted two undergraduate teams in winning the Finalist Award (top 2.0\% among 27,456 teams) in MCM/ICM 2025, demonstrating its practical effectiveness as a modeling copilot. Our code is available at https://github.com/usail-hkust/LLM-MM-Agent

LLMs have transformed NLP, yet deploying them on edge devices poses great carbon challenges. Prior estimators remain incomplete, neglecting peripheral energy use, distinct prefill/decode behaviors, and SoC design complexity. This paper presents CO2-Meter, a unified framework for estimating operational and embodied carbon in LLM edge inference. Contributions include: (1) equation-based peripheral energy models and datasets; (2) a GNN-based predictor with phase-specific LLM energy data; (3) a unit-level embodied carbon model for SoC bottleneck analysis; and (4) validation showing superior accuracy over prior methods. Case studies show CO2-Meter's effectiveness in identifying carbon hotspots and guiding sustainable LLM design on edge platforms. Source code: https://github.com/fuzhenxiao/CO2-Meter

OpenLanguageModel (OLM) is an open-source PyTorch library for building and pretraining small language models while keeping their machinery visible. In OLM, model code reads like the architecture: components are ordinary modules, while Block, Residual, Repeat, and Parallel describe how they are wired. The resulting model can move unchanged from a teaching notebook to a complete pretraining run or a research ablation. OLM connects this readable model layer to tokenizers, local and streaming datasets, optimization, mixed precision, callbacks, checkpoints, and hardware-aware CPU, single-GPU, and single-node multi-GPU execution. We demonstrate the full path by tracing GPT-2 from diagram to code, launching a FineWeb-Edu training script, replacing one attention component, and letting AutoTrainer configure the available machine. The package includes 27 presets across nine familiar model families and documentation that progresses from LM fundamentals to architecture research. Validation shows close agreement with independent reference implementations, 90.6% four-GPU weak-scaling efficiency for a 348M-parameter workload, compact architecture edits, and positive early usability results. OLM is MIT-licensed and available through PyPI, GitHub, and its documentation site.

Architectural design is a highly complex practice that involves a wide diversity of disciplines, technologies, proprietary design software, expertise, and an almost infinite number of constraints, across a vast array of design tasks. Enabling intuitive, accessible, and scalable design processes is an important step towards performance-driven and sustainable design for all. To that end, we introduce Architext, a novel semantic generation assistive tool. Architext enables design generation with only natural language prompts, given to large-scale Language Models, as input. We conduct a thorough quantitative evaluation of Architext's downstream task performance, focusing on semantic accuracy and diversity for a number of pre-trained language models ranging from 120 million to 6 billion parameters. Architext models are able to learn the specific design task, generating valid residential layouts at a near 100% rate. Accuracy shows great improvement when scaling the models, with the largest model (GPT-J) yielding impressive accuracy ranging between 25% to over 80% for different prompt categories. We open source the finetuned Architext models and our synthetic dataset, hoping to inspire experimentation in this exciting area of design research.

Large Language Model agents increasingly operate external systems through programmatic interfaces, yet practitioners lack empirical guidance on how to structure the context these agents consume. Using SQL generation as a proxy for programmatic agent operations, we present a systematic study of context engineering for structured data, comprising 9,649 experiments across 11 models, 4 formats (YAML, Markdown, JSON, Token-Oriented Object Notation [TOON]), and schemas ranging from 10 to 10,000 tables. Our findings challenge common assumptions. First, architecture choice is model-dependent: file-based context retrieval improves accuracy for frontier-tier models (Claude, GPT, Gemini; +2.7%, p=0.029) but shows mixed results for open source models (aggregate -7.7%, p<0.001), with deficits varying substantially by model. Second, format does not significantly affect aggregate accuracy (chi-squared=2.45, p=0.484), though individual models, particularly open source, exhibit format-specific sensitivities. Third, model capability is the dominant factor, with a 21 percentage point accuracy gap between frontier and open source tiers that dwarfs any format or architecture effect. Fourth, file-native agents scale to 10,000 tables through domain-partitioned schemas while maintaining high navigation accuracy. Fifth, file size does not predict runtime efficiency: compact or novel formats can incur a token overhead driven by grep output density and pattern unfamiliarity, with the magnitude depending on model capability. These findings provide practitioners with evidence-based guidance for deploying LLM agents on structured systems, demonstrating that architectural decisions should be tailored to model capability rather than assuming universal best practices.

Automatically compiling open-source software (OSS) projects is a vital, labor-intensive, and complex task, which makes it a good challenge for LLM Agents. Existing methods rely on manually curated rules and workflows, which cannot adapt to OSS that requires customized configuration or environment setup. Recent attempts using Large Language Models (LLMs) used selective evaluation on a subset of highly rated OSS, a practice that underestimates the realistic challenges of OSS compilation. In practice, compilation instructions are often absent, dependencies are undocumented, and successful builds may even require patching source files or modifying build scripts. We propose a more challenging and realistic benchmark, BUILD-BENCH, comprising OSS that are more diverse in quality, scale, and characteristics. Furthermore, we propose a strong baseline LLM-based agent, OSS-BUILD-AGENT, an effective system with enhanced build instruction retrieval module that achieves state-of-the-art performance on BUILD-BENCH and is adaptable to heterogeneous OSS characteristics. We also provide detailed analysis regarding different compilation method design choices and their influence to the whole task, offering insights to guide future advances. We believe performance on BUILD-BENCH can faithfully reflect an agent's ability to tackle compilation as a complex software engineering tasks, and, as such, our benchmark will spur innovation with a significant impact on downstream applications in the fields of software development and software security.

The field of Computer-Aided Design (CAD) generation has made significant progress in recent years. Existing methods typically fall into two separate categories: parametric CAD modeling and direct boundary representation (B-Rep) synthesis. In modern feature-based CAD systems, parametric modeling and B-Rep are inherently intertwined, as advanced parametric operations (e.g., fillet and chamfer) require explicit selection of B-Rep geometric primitives, and the B-Rep itself is derived from parametric operations. Consequently, this paradigm gap remains a critical factor limiting AI-driven CAD modeling for complex industrial product design. This paper presents FutureCAD, a novel text-to-CAD framework that leverages large language models (LLMs) and a B-Rep grounding transformer (BRepGround) for high-fidelity CAD generation. Our method generates executable CadQuery scripts, and introduces a text-based query mechanism that enables the LLM to specify geometric selections via natural language, which BRepGround then grounds to the target primitives. To train our framework, we construct a new dataset comprising real-world CAD models. For the LLM, we apply supervised fine-tuning (SFT) to establish fundamental CAD generation capabilities, followed by reinforcement learning (RL) to improve generalization. Experiments show that FutureCAD achieves state-of-the-art CAD generation performance. Code and dataset are available at: https://github.com/JohanStackk/FutureCAD

The intelligent interpretation of buildings plays a significant role in urban planning and management, macroeconomic analysis, population dynamics, etc. Remote sensing image building interpretation primarily encompasses building extraction and change detection. However, current methodologies often treat these two tasks as separate entities, thereby failing to leverage shared knowledge. Moreover, the complexity and diversity of remote sensing image scenes pose additional challenges, as most algorithms are designed to model individual small datasets, thus lacking cross-scene generalization. In this paper, we propose a comprehensive remote sensing image building understanding model, termed RSBuilding, developed from the perspective of the foundation model. RSBuilding is designed to enhance cross-scene generalization and task universality. Specifically, we extract image features based on the prior knowledge of the foundation model and devise a multi-level feature sampler to augment scale information. To unify task representation and integrate image spatiotemporal clues, we introduce a cross-attention decoder with task prompts. Addressing the current shortage of datasets that incorporate annotations for both tasks, we have developed a federated training strategy to facilitate smooth model convergence even when supervision for some tasks is missing, thereby bolstering the complementarity of different tasks. Our model was trained on a dataset comprising up to 245,000 images and validated on multiple building extraction and change detection datasets. The experimental results substantiate that RSBuilding can concurrently handle two structurally distinct tasks and exhibits robust zero-shot generalization capabilities.

Agentic AI systems orchestrate multiple LLM-based agents through workflow architectures that coordinate decisions, tools, and external actions. While current platforms emphasize runtime safeguards, little support exists for verifying workflows during system design. From a Modeling \& Simulation perspective, this gap is analogous to composing conceptual models without verifying whether their building blocks interact coherently. We propose a design-time verification approach that models agentic workflows as compositions of reusable building blocks and checks their compatibility through twelve structural rules. We implemented these rules in a software prototype and evaluated them using two openly released datasets: 48 workflows with known design flaws and 168 variants that preserve workflow logic but alter graph structure. Results show that our verifier reliably detects violations even when flawed designs are obscured through structural transformations such as splitting tasks between agents. Future works could combine our verification with community repositories of building blocks to compose safe agentic workflows.

Building agents, systems that perceive and act upon their environment with a degree of autonomy, has long been a focus of AI research. This pursuit has recently become vastly more practical with the emergence of large language models (LLMs) capable of using natural language to integrate information, follow instructions, and perform forms of "reasoning" and planning across a wide range of tasks. With its multimodal data streams and orchestrated workflows spanning multiple systems, radiology is uniquely suited to benefit from agents that can adapt to context and automate repetitive yet complex tasks. In radiology, LLMs and their multimodal variants have already demonstrated promising performance for individual tasks such as information extraction and report summarization. However, using LLMs in isolation underutilizes their potential to support complex, multi-step workflows where decisions depend on evolving context from multiple information sources. Equipping LLMs with external tools and feedback mechanisms enables them to drive systems that exhibit a spectrum of autonomy, ranging from semi-automated workflows to more adaptive agents capable of managing complex processes. This review examines the design of such LLM-driven agentic systems, highlights key applications, discusses evaluation methods for planning and tool use, and outlines challenges such as error cascades, tool-use efficiency, and health IT integration.

We introduce ResPlan, a large-scale dataset of 17,000 detailed, structurally rich, and realistic residential floor plans, created to advance spatial AI research. Each plan includes precise annotations of architectural elements (walls, doors, windows, balconies) and functional spaces (such as kitchens, bedrooms, and bathrooms). ResPlan addresses key limitations of existing datasets such as RPLAN (Wu et al., 2019) and MSD (van Engelenburg et al., 2024) by offering enhanced visual fidelity and greater structural diversity, reflecting realistic and non-idealized residential layouts. Designed as a versatile, general-purpose resource, ResPlan supports a wide range of applications including robotics, reinforcement learning, generative AI, virtual and augmented reality, simulations, and game development. Plans are provided in both geometric and graph-based formats, enabling direct integration into simulation engines and fast 3D conversion. A key contribution is an open-source pipeline for geometry cleaning, alignment, and annotation refinement. Additionally, ResPlan includes structured representations of room connectivity, supporting graph-based spatial reasoning tasks. Finally, we present comparative analyses with existing benchmarks and outline several open benchmark tasks enabled by ResPlan. Ultimately, ResPlan offers a significant advance in scale, realism, and usability, providing a robust foundation for developing and benchmarking next-generation spatial intelligence systems.

Foundation model development attracts a rapidly expanding body of contributors, scientists, and applications. To help shape responsible development practices, we introduce the Foundation Model Development Cheatsheet: a growing collection of 250+ tools and resources spanning text, vision, and speech modalities. We draw on a large body of prior work to survey resources (e.g. software, documentation, frameworks, guides, and practical tools) that support informed data selection, processing, and understanding, precise and limitation-aware artifact documentation, efficient model training, advance awareness of the environmental impact from training, careful model evaluation of capabilities, risks, and claims, as well as responsible model release, licensing and deployment practices. We hope this curated collection of resources helps guide more responsible development. The process of curating this list, enabled us to review the AI development ecosystem, revealing what tools are critically missing, misused, or over-used in existing practices. We find that (i) tools for data sourcing, model evaluation, and monitoring are critically under-serving ethical and real-world needs, (ii) evaluations for model safety, capabilities, and environmental impact all lack reproducibility and transparency, (iii) text and particularly English-centric analyses continue to dominate over multilingual and multi-modal analyses, and (iv) evaluation of systems, rather than just models, is needed so that capabilities and impact are assessed in context.

Declaration of Performance (DoP) documents, mandated by EU regulation, specify characteristics of construction products, such as fire resistance and insulation. While this information is essential for quality control and reducing carbon footprints, it is not easily machine readable. Despite content requirements, DoPs exhibit significant variation in layout, schema, and format, further complicated by their multilingual nature. In this work, we propose DoP Key Information Extraction (KIE) and Question Answering (QA) as new NLP challenges. To address this challenge, we design a domain-specific AgenticIE system based on a planner-executor-corresponder pattern. For evaluation, we introduce a high-density, expert-annotated dataset of complex, multi-page regulatory documents in English and German. Unlike standard IE datasets (e.g., FUNSD, CORD) with sparse annotations, our dataset contains over 15K annotated entities, averaging over 190 annotations per document. Our agentic system outperforms static and multimodal LLM baselines, achieving Exact Match (EM) scores of 0.396 vs. 0.342 (GPT-4o, +16%) and 0.314 (GPT-4o-V, +26%) across the KIE and QA tasks. Our experimental analysis validates the benefits of the agentic system, as well as the challenging nature of our new DoP dataset.

Coarse architectural models are often generated at scales ranging from individual buildings to scenes for downstream applications such as Digital Twin City, Metaverse, LODs, etc. Such piece-wise planar models can be abstracted as twins from 3D dense reconstructions. However, these models typically lack realistic texture relative to the real building or scene, making them unsuitable for vivid display or direct reference. In this paper, we present TwinTex, the first automatic texture mapping framework to generate a photo-realistic texture for a piece-wise planar proxy. Our method addresses most challenges occurring in such twin texture generation. Specifically, for each primitive plane, we first select a small set of photos with greedy heuristics considering photometric quality, perspective quality and facade texture completeness. Then, different levels of line features (LoLs) are extracted from the set of selected photos to generate guidance for later steps. With LoLs, we employ optimization algorithms to align texture with geometry from local to global. Finally, we fine-tune a diffusion model with a multi-mask initialization component and a new dataset to inpaint the missing region. Experimental results on many buildings, indoor scenes and man-made objects of varying complexity demonstrate the generalization ability of our algorithm. Our approach surpasses state-of-the-art texture mapping methods in terms of high-fidelity quality and reaches a human-expert production level with much less effort. Project page: https://vcc.tech/research/2023/TwinTex.

Building extraction - needed for inventory management and planning of urban environment - is affected by the misalignment between labels and off-nadir source imagery in training data. Teacher-Student learning of noise-tolerant convolutional neural networks (CNNs) is the existing solution, but the Student networks typically have lower accuracy and cannot surpass the Teacher's performance. This paper proposes a supervised domain adaptation (SDA) of encoder-decoder networks (EDNs) between noisy and clean datasets to tackle the problem. EDNs are configured with high-performing lightweight encoders such as EfficientNet, ResNeSt, and MobileViT. The proposed method is compared against the existing Teacher-Student learning methods like knowledge distillation (KD) and deep mutual learning (DML) with three newly developed datasets. The methods are evaluated for different urban buildings (low-rise, mid-rise, high-rise, and skyscrapers), where misalignment increases with the increase in building height and spatial resolution. For a robust experimental design, 43 lightweight CNNs, five optimisers, nine loss functions, and seven EDNs are benchmarked to obtain the best-performing EDN for SDA. The SDA of the best-performing EDN from our study significantly outperformed KD and DML with up to 0.943, 0.868, 0.912, and 0.697 F1 scores in the low-rise, mid-rise, high-rise, and skyscrapers respectively. The proposed method and the experimental findings will be beneficial in training robust CNNs for building extraction.

SpatialLM is a large language model designed to process 3D point cloud data and generate structured 3D scene understanding outputs. These outputs include architectural elements like walls, doors, windows, and oriented object boxes with their semantic categories. Unlike previous methods which exploit task-specific network designs, our model adheres to the standard multimodal LLM architecture and is fine-tuned directly from open-source LLMs. To train SpatialLM, we collect a large-scale, high-quality synthetic dataset consisting of the point clouds of 12,328 indoor scenes (54,778 rooms) with ground-truth 3D annotations, and conduct a careful study on various modeling and training decisions. On public benchmarks, our model gives state-of-the-art performance in layout estimation and competitive results in 3D object detection. With that, we show a feasible path for enhancing the spatial understanding capabilities of modern LLMs for applications in augmented reality, embodied robotics, and more.

A critical factor in the success of decision support systems is the accurate modeling of user preferences. Psychology research has demonstrated that users often develop their preferences during the elicitation process, highlighting the pivotal role of system-user interaction in developing personalized systems. This paper introduces a novel approach, combining Large Language Models (LLMs) with Constraint Programming to facilitate interactive decision support. We study this hybrid framework through the lens of meeting scheduling, a time-consuming daily activity faced by a multitude of information workers. We conduct three studies to evaluate the novel framework, including a diary study (n=64) to characterize contextual scheduling preferences, a quantitative evaluation of the system's performance, and a user study (n=10) with a prototype system. Our work highlights the potential for a hybrid LLM and optimization approach for iterative preference elicitation and design considerations for building systems that support human-system collaborative decision-making processes.

Developing interactive agents that can understand language, perceive their surroundings, and act within the physical world is a long-standing goal of AI research. The Minecraft Collaborative Building Task (MCBT) (Narayan-Chen, Jayannavar, and Hockenmaier 2019), a two-player game in which an Architect (A) instructs a Builder (B) to construct a target structure in a simulated 3D Blocks World environment, offers a rich platform to work towards this goal. In this work, we focus on the Builder Action Prediction (BAP) subtask: predicting B's actions in a multimodal game context (Jayannavar, Narayan-Chen, and Hockenmaier 2020) - a challenging testbed for grounded instruction following, with limited training data. We holistically re-examine this task and introduce BAP v2 to address key challenges in evaluation, training data, and modeling. Specifically, we define an enhanced evaluation benchmark, featuring a cleaner test set and fairer, more insightful metrics that also reveal spatial reasoning as the primary performance bottleneck. To address data scarcity and to teach models basic spatial skills, we generate different types of synthetic MCBT data. We observe that current, LLM-based SOTA models trained on the human BAP dialogues fail on these simpler, synthetic BAP ones, but show that training models on this synthetic data improves their performance across the board. We also introduce a new SOTA model, Llama-CRAFTS, which leverages richer input representations, and achieves an F1 score of 53.0 on the BAP v2 task and strong performance on the synthetic data. While this result marks a notable 6 points improvement over previous work, it also underscores the task's remaining difficulty, establishing BAP v2 as a fertile ground for future research, and providing a useful measure of the spatial capabilities of current text-only LLMs in such embodied tasks.

AI agents are increasingly used to solve complex, multi-step tasks, but existing multi-agent frameworks remain brittle as workflows grow in scale and depth. Small errors at intermediate stages can propagate through agent interactions, while insufficient grounding and weak verification mechanisms further limit reliability. We present Meta-Agent, a two-phase framework that automatically constructs and executes specialized multi-agent systems from natural-language task descriptions. In the construction phase, a task planner decomposes a problem into a directed acyclic graph of agent specifications with explicit input/output contracts and verification criteria. A web search module grounds each specification with external evidence, and a code generation module produces system prompts and tool configurations. A construction-time verification stage then validates generated artifacts and triggers targeted regeneration when failures are detected. In the execution phase, a coordinator dispatches subtasks across the agent graph while execution-time verification gates intermediate outputs. We further introduce a three-level error attribution mechanism that distinguishes local, upstream, and structural failures, enabling targeted recovery strategies ranging from localized retries to partial re-execution and re-decomposition. We evaluate Meta-Agent across coding, contextual learning, and open-ended reasoning tasks. Experiments against strong multi-agent baselines and ablation studies demonstrate consistent improvements in task success rate, error recovery, and workflow stability. The results highlight the importance of tightly integrating planning, grounding, and verification for building reliable multi-agent systems.

Real-world multi-modal problems are rarely solved by a single machine learning model, and often require multi-step computational plans that involve stitching several models. Tool-augmented LLMs hold tremendous promise for automating the generation of such computational plans. However, the lack of standardized benchmarks for evaluating LLMs as planners for multi-step multi-modal tasks has prevented a systematic study of planner design decisions. Should LLMs generate a full plan in a single shot or step-by-step? Should they invoke tools directly with Python code or through structured data formats like JSON? Does feedback improve planning? To answer these questions and more, we introduce m&m's: a benchmark containing 4K+ multi-step multi-modal tasks involving 33 tools that include multi-modal models, (free) public APIs, and image processing modules. For each of these task queries, we provide automatically generated plans using this realistic toolset. We further provide a high-quality subset of 1,565 task plans that are human-verified and correctly executable. With m&m's, we evaluate 6 popular LLMs with 2 planning strategies (multi-step vs. step-by-step planning), 2 plan formats (JSON vs. code), and 3 types of feedback (parsing/verification/execution). Finally, we summarize takeaways from our extensive experiments. Our dataset and code are available on HuggingFace (https://huggingface.co/datasets/zixianma/mnms) and Github (https://github.com/RAIVNLab/mnms).

We propose SWE-Universe, a scalable and efficient framework for automatically constructing real-world software engineering (SWE) verifiable environments from GitHub pull requests (PRs). To overcome the prevalent challenges of automatic building, such as low production yield, weak verifiers, and prohibitive cost, our framework utilizes a building agent powered by an efficient custom-trained model. This agent employs iterative self-verification and in-loop hacking detection to ensure the reliable generation of high-fidelity, verifiable tasks. Using this method, we scale the number of real-world multilingual SWE environments to a million scale (807,693). We demonstrate the profound value of our environments through large-scale agentic mid-training and reinforcement learning. Finally, we applied this technique to Qwen3-Max-Thinking and achieved a score of 75.3% on SWE-Bench Verified. Our work provides both a critical resource and a robust methodology to advance the next generation of coding agents.

Engineered timber is pivotal to low-carbon construction, but moisture uptake during its service life can compromise structural reliability and impede reuse within a circular economy model. Despite growing interest, quantitative standards for classifying the reusability of moisture-exposed timber are still lacking. This study develops a probabilistic framework to determine the post-exposure reusability of engineered timber. Laminated specimens were soaked to full saturation, dried to 25% moisture content, and subjected to destructive three-point flexural testing. Structural integrity was quantified by a residual-performance metric that assigns 80% weight to the retained flexural modulus and 20% to the retained maximum load, benchmarked against unexposed controls. A hierarchical Bayesian multinomial logistic model with horseshoe priors, calibrated through Markov-Chain Monte-Carlo sampling, jointly infers the decision threshold separating three Modern Methods of Construction (MMC) reuse levels and predicts those levels from five field-measurable features: density, moisture content, specimen size, grain orientation, and surface hardness. Results indicate that a single wet-dry cycle preserves 70% of specimens above the 0.90 residual-performance threshold (Level 1), whereas repeated cycling lowers the mean residual to 0.78 and reallocates many specimens to Levels 2-3. The proposed framework yields quantified decision boundaries and a streamlined on-site testing protocol, providing a foundation for robust quality assurance standards.

Generating editable, parametric CAD models from a single image holds great potential to lower the barriers of industrial concept design. However, current multi-modal large language models (MLLMs) still struggle with accurately inferring 3D geometry from 2D images due to limited spatial reasoning capabilities. We address this limitation by introducing GACO-CAD, a novel two-stage post-training framework. It is designed to achieve a joint objective: simultaneously improving the geometric accuracy of the generated CAD models and encouraging the use of more concise modeling procedures. First, during supervised fine-tuning, we leverage depth and surface normal maps as dense geometric priors, combining them with the RGB image to form a multi-channel input. In the context of single-view reconstruction, these priors provide complementary spatial cues that help the MLLM more reliably recover 3D geometry from 2D observations. Second, during reinforcement learning, we introduce a group length reward that, while preserving high geometric fidelity, promotes the generation of more compact and less redundant parametric modeling sequences. A simple dynamic weighting strategy is adopted to stabilize training. Experiments on the DeepCAD and Fusion360 datasets show that GACO-CAD achieves state-of-the-art performance under the same MLLM backbone, consistently outperforming existing methods in terms of code validity, geometric accuracy, and modeling conciseness.

Eight percent of global carbon dioxide emissions can be attributed to the production of cement, the main component of concrete, which is also the dominant source of CO2 emissions in the construction of data centers. The discovery of lower-carbon concrete formulae is therefore of high significance for sustainability. However, experimenting with new concrete formulae is time consuming and labor intensive, as one usually has to wait to record the concrete's 28-day compressive strength, a quantity whose measurement can by its definition not be accelerated. This provides an opportunity for experimental design methodology like Bayesian Optimization (BO) to accelerate the search for strong and sustainable concrete formulae. Herein, we 1) propose modeling steps that make concrete strength amenable to be predicted accurately by a Gaussian process model with relatively few measurements, 2) formulate the search for sustainable concrete as a multi-objective optimization problem, and 3) leverage the proposed model to carry out multi-objective BO with real-world strength measurements of the algorithmically proposed mixes. Our experimental results show improved trade-offs between the mixtures' global warming potential (GWP) and their associated compressive strengths, compared to mixes based on current industry practices. Our methods are open-sourced at github.com/facebookresearch/SustainableConcrete.

While many EDA tasks already involve graph-based data, existing LLMs in EDA primarily either represent graphs as sequential text, or simply ignore graph-structured data that might be beneficial like dataflow graphs of RTL code. Recent studies have found that LLM performance suffers when graphs are represented as sequential text, and using additional graph information significantly boosts performance. To address these challenges, we introduce BRIDGES, a framework designed to incorporate graph modality into LLMs for EDA tasks. BRIDGES integrates an automated data generation workflow, a solution that combines graph modality with LLM, and a comprehensive evaluation suite. First, we establish an LLM-driven workflow to generate RTL and netlist-level data, converting them into dataflow and netlist graphs with function descriptions. This workflow yields a large-scale dataset comprising over 500,000 graph instances and more than 1.5 billion tokens. Second, we propose a lightweight cross-modal projector that encodes graph representations into text-compatible prompts, enabling LLMs to effectively utilize graph data without architectural modifications. Experimental results demonstrate 2x to 10x improvements across multiple tasks compared to text-only baselines, including accuracy in design retrieval, type prediction and perplexity in function description, with negligible computational overhead (<1% model weights increase and <30% additional runtime overhead). Even without additional LLM finetuning, our results outperform text-only by a large margin. We plan to release BRIDGES, including the dataset, models, and training flow.

AI for Industrial Asset Lifecycle Management aims to automate complex operational workflows -- such as condition monitoring, maintenance planning, and intervention scheduling -- to reduce human workload and minimize system downtime. Traditional AI/ML approaches have primarily tackled these problems in isolation, solving narrow tasks within the broader operational pipeline. In contrast, the emergence of AI agents and large language models (LLMs) introduces a next-generation opportunity: enabling end-to-end automation across the entire asset lifecycle. This paper envisions a future where AI agents autonomously manage tasks that previously required distinct expertise and manual coordination. To this end, we introduce AssetOpsBench -- a unified framework and environment designed to guide the development, orchestration, and evaluation of domain-specific agents tailored for Industry 4.0 applications. We outline the key requirements for such holistic systems and provide actionable insights into building agents that integrate perception, reasoning, and control for real-world industrial operations. The software is available at https://github.com/IBM/AssetOpsBench.

Advancements in foundation models have made it possible to conduct applications in various downstream tasks. Especially, the new era has witnessed a remarkable capability to extend Large Language Models (LLMs) for tackling tasks of 3D scene understanding. Current methods rely heavily on 3D point clouds, but the 3D point cloud reconstruction of an indoor scene often results in information loss. Some textureless planes or repetitive patterns are prone to omission and manifest as voids within the reconstructed 3D point clouds. Besides, objects with complex structures tend to introduce distortion of details caused by misalignments between the captured images and the dense reconstructed point clouds. 2D multi-view images present visual consistency with 3D point clouds and provide more detailed representations of scene components, which can naturally compensate for these deficiencies. Based on these insights, we propose Argus, a novel 3D multimodal framework that leverages multi-view images for enhanced 3D scene understanding with LLMs. In general, Argus can be treated as a 3D Large Multimodal Foundation Model (3D-LMM) since it takes various modalities as input(text instructions, 2D multi-view images, and 3D point clouds) and expands the capability of LLMs to tackle 3D tasks. Argus involves fusing and integrating multi-view images and camera poses into view-as-scene features, which interact with the 3D features to create comprehensive and detailed 3D-aware scene embeddings. Our approach compensates for the information loss while reconstructing 3D point clouds and helps LLMs better understand the 3D world. Extensive experiments demonstrate that our method outperforms existing 3D-LMMs in various downstream tasks.

Reverse engineering 3D computer-aided design (CAD) models from images is an important task for many downstream applications including interactive editing, manufacturing, architecture, robotics, etc. The difficulty of the task lies in vast representational disparities between the CAD output and the image input. CAD models are precise, programmatic constructs that involve sequential operations combining discrete command structure with continuous attributes, making it challenging to learn and optimize in an end-to-end fashion. Concurrently, input images introduce inherent challenges such as photometric variability and sensor noise, complicating the reverse engineering process. In this work, we introduce a novel approach that conditionally factorizes the task into two sub-problems. First, we leverage vision-language foundation models (VLMs), a finetuned Llama3.2, to predict the global discrete base structure with semantic information. Second, we propose TrAssembler that, conditioned on the discrete structure with semantics, predicts the continuous attribute values. To support the training of our TrAssembler, we further constructed an annotated CAD dataset of common objects from ShapeNet. Putting all together, our approach and data demonstrate significant first steps towards CAD-ifying images in the wild. Code and data can be found in https://github.com/qq456cvb/Img2CAD.

Business Process Model and Notation (BPMN) is a widely adopted standard for representing complex business workflows. While BPMN diagrams are often exchanged as visual images, existing methods primarily rely on XML representations for computational analysis. In this work, we present a pipeline that leverages Vision-Language Models (VLMs) to extract structured JSON representations of BPMN diagrams directly from images, without requiring source model files or textual annotations. We also incorporate optical character recognition (OCR) for textual enrichment and evaluate the generated element lists against ground truth data derived from the source XML files. Our approach enables robust component extraction in scenarios where original source files are unavailable. We benchmark multiple VLMs and observe performance improvements in several models when OCR is used for text enrichment. In addition, we conducted extensive statistical analyses of OCR-based enrichment methods and prompt ablation studies, providing a clearer understanding of their impact on model performance.

Construction safety inspections typically involve a human inspector identifying safety concerns on-site. With the rise of powerful Vision Language Models (VLMs), researchers are exploring their use for tasks such as detecting safety rule violations from on-site images. However, there is a lack of open datasets to comprehensively evaluate and further fine-tune VLMs in construction safety inspection. Current applications of VLMs use small, supervised datasets, limiting their applicability in tasks they are not directly trained for. In this paper, we propose the ConstructionSite 10k, featuring 10,000 construction site images with annotations for three inter-connected tasks, including image captioning, safety rule violation visual question answering (VQA), and construction element visual grounding. Our subsequent evaluation of current state-of-the-art large pre-trained VLMs shows notable generalization abilities in zero-shot and few-shot settings, while additional training is needed to make them applicable to actual construction sites. This dataset allows researchers to train and evaluate their own VLMs with new architectures and techniques, providing a valuable benchmark for construction safety inspection.

Large Language Model (LLM) agents have shown great potential for solving real-world problems and promise to be a solution for tasks automation in industry. However, more benchmarks are needed to systematically evaluate automation agents from an industrial perspective, for example, in Civil Engineering. Therefore, we propose DrafterBench for the comprehensive evaluation of LLM agents in the context of technical drawing revision, a representation task in civil engineering. DrafterBench contains twelve types of tasks summarized from real-world drawing files, with 46 customized functions/tools and 1920 tasks in total. DrafterBench is an open-source benchmark to rigorously test AI agents' proficiency in interpreting intricate and long-context instructions, leveraging prior knowledge, and adapting to dynamic instruction quality via implicit policy awareness. The toolkit comprehensively assesses distinct capabilities in structured data comprehension, function execution, instruction following, and critical reasoning. DrafterBench offers detailed analysis of task accuracy and error statistics, aiming to provide deeper insight into agent capabilities and identify improvement targets for integrating LLMs in engineering applications. Our benchmark is available at https://github.com/Eason-Li-AIS/DrafterBench, with the test set hosted at https://huggingface.co/datasets/Eason666/DrafterBench.

Computer-aided design (CAD) is fundamental to modern engineering and manufacturing, but creating CAD models still requires expert knowledge and specialized software. Recent advances in large language models (LLMs) open up the possibility of generative CAD, where natural language is directly translated into parametric 3D models. However, most existing methods generate task-specific command sequences that pretrained models cannot directly handle. These sequences must be converted into CAD representations such as CAD vectors before a 3D model can be produced, which requires training models from scratch and adds unnecessary complexity. To tackle this issue, we propose generating CadQuery code directly from text, leveraging the strengths of pretrained LLMs to produce 3D models without intermediate representations, using this Python-based scripting language. Since LLMs already excel at Python generation and spatial reasoning, fine-tuning them on Text-to-CadQuery data proves highly effective. Given that these capabilities typically improve with scale, we hypothesize that larger models will perform better after fine-tuning. To enable this, we augment the Text2CAD dataset with 170,000 CadQuery annotations. We fine-tune six open-source LLMs of varying sizes and observe consistent improvements. Our best model achieves a top-1 exact match of 69.3%, up from 58.8%, and reduces Chamfer Distance by 48.6%. Project page: https://github.com/Text-to-CadQuery/Text-to-CadQuery.

We present PDE-Agents, a multi-agent ecosystem that automates the full lifecycle of partial differential equation (PDE) / finite element method (FEM) simulations through natural-language interaction. Three specialist large language model (LLM) agents (Simulation, Analytics, Database) are orchestrated via a LangGraph supervisor, with a local open-source LLM stack (Qwen3-Coder-Next, Llama 4 Scout) on dual NVIDIA RTX PRO 6000 GPUs. The architecture is model-agnostic, validated across two LLM generations. A GraphRAG knowledge base (Neo4j, 768-d vector embeddings) encodes curated material properties, known failure patterns, and prior run lineage. We report seven contributions: (i) a verification and validation (V&V) study confirming second-order spatial convergence (O(h^2)) on the heat-equation solver; (ii) a three-way ablation over 50 tasks with a frozen KG (KG On, KG Off, KG Smart), where KG Smart reaches 100% success and the highest output quality (physics 0.933 vs. 0.853 for KG Off; MPF 0.926 vs. 0.796); (iii) a novel-material experiment with three fictional materials known only to the KG, where KG Smart attains near-perfect material property fidelity (MPF = 1.00) versus 0.34 for the KG-free baseline; (iv) a failure analysis tracing KG On's three failures to budget exhaustion and timeout, establishing warm-start injection as the dominant reliability factor; (v) an adaptive framework selecting the optimal retrieval mode per task; (vi) production metrics from 1,369 runs (97.8% success, 57.6% first-try); and (vii) a 100-task KG growth experiment showing a difficulty-dependent gain, with hard-task MPF improving 8.8% while easy/novel tasks stay at ceiling. All code, models, and evaluation artifacts are released openly. Our findings show that integration pattern, not knowledge content, determines whether GraphRAG augmentation helps or hinders LLM agents.

As LLMs advance their reasoning capabilities about the physical world, the absence of rigorous benchmarks for evaluating their ability to generate scientifically valid physical models has become a critical gap. Computational mechanics, which develops and applies mathematical models and numerical methods to predict the behavior of physical systems under forces, deformation, and constraints, provides an ideal foundation for structured scientific reasoning evaluation. Problems follow clear mathematical structure, enforce strict physical and numerical constraints, and support objective verification. The discipline requires constructing explicit models of physical systems and reasoning about geometry, spatial relationships, and material behavior, connecting directly to emerging AI goals in physical reasoning and world modeling. We introduce FEM-Bench, a computational mechanics benchmark designed to evaluate the ability of LLMs to generate correct finite element method (FEM) and related code. FEM-Bench 2025 contains a suite of introductory but nontrivial tasks aligned with material from a first graduate course on computational mechanics. These tasks capture essential numerical and physical modeling challenges while representing only a small fraction of the complexity present in the discipline. Despite their simplicity, state-of-the-art LLMs do not reliably solve all of them. In a five attempt run, the best performing model at function writing, Gemini 3 Pro, completed 30/33 tasks at least once and 26/33 tasks all five times. The best performing model at unit test writing, GPT-5, had an Average Joint Success Rate of 73.8%. Other popular models showed broad performance variation. FEM-Bench establishes a structured foundation for evaluating AI-generated scientific code, and future iterations will incorporate increasingly sophisticated tasks to track progress as models evolve.

Although LEGO sets have entertained generations of children and adults, the challenge of designing customized builds matching the complexity of real-world or imagined scenes remains too great for the average enthusiast. In order to make this feat possible, we implement a system that generates a LEGO brick model from 2D images. We design a novel solution to this problem that uses an octree-structured autoencoder trained on 3D voxelized models to obtain a feasible latent representation for model reconstruction, and a separate network trained to predict this latent representation from 2D images. LEGO models are obtained by algorithmic conversion of the 3D voxelized model to bricks. We demonstrate first-of-its-kind conversion of photographs to 3D LEGO models. An octree architecture enables the flexibility to produce multiple resolutions to best fit a user's creative vision or design needs. In order to demonstrate the broad applicability of our system, we generate step-by-step building instructions and animations for LEGO models of objects and human faces. Finally, we test these automatically generated LEGO sets by constructing physical builds using real LEGO bricks.

Recognizing symbols in architectural CAD drawings is critical for various advanced engineering applications. In this paper, we propose a novel CAD data annotation engine that leverages intrinsic attributes from systematically archived CAD drawings to automatically generate high-quality annotations, thus significantly reducing manual labeling efforts. Utilizing this engine, we construct ArchCAD-400K, a large-scale CAD dataset consisting of 413,062 chunks from 5538 highly standardized drawings, making it over 26 times larger than the largest existing CAD dataset. ArchCAD-400K boasts an extended drawing diversity and broader categories, offering line-grained annotations. Furthermore, we present a new baseline model for panoptic symbol spotting, termed Dual-Pathway Symbol Spotter (DPSS). It incorporates an adaptive fusion module to enhance primitive features with complementary image features, achieving state-of-the-art performance and enhanced robustness. Extensive experiments validate the effectiveness of DPSS, demonstrating the value of ArchCAD-400K and its potential to drive innovation in architectural design and construction.

Natural disasters are increasing in frequency and severity, causing hundreds of billions of dollars in damage annually and posing growing threats to infrastructure and human livelihoods. Accurate data on roofing materials is critical for modeling building vulnerability to natural hazards such as earthquakes, floods, wildfires, and hurricanes, yet such data remain unavailable. To address this gap, we introduce RoofNet, the largest and most geographically diverse novel multimodal dataset to date, comprising over 51,500 samples from 184 geographically diverse sites pairing high-resolution Earth Observation (EO) imagery with curated text annotations for global roof material classification. RoofNet includes geographically diverse satellite imagery labeled with 14 key roofing types -- such as asphalt shingles, clay tiles, and metal sheets -- and is designed to enhance the fidelity of global exposure datasets through vision-language modeling (VLM). We sample EO tiles from climatically and architecturally distinct regions to construct a representative dataset. A subset of 6,000 images was annotated in collaboration with domain experts to fine-tune a VLM. We used geographic- and material-aware prompt tuning to enhance class separability. The fine-tuned model was then applied to the remaining EO tiles, with predictions refined through rule-based and human-in-the-loop verification. In addition to material labels, RoofNet provides rich metadata including roof shape, footprint area, solar panel presence, and indicators of mixed roofing materials (e.g., HVAC systems). RoofNet supports scalable, AI-driven risk assessment and serves as a downstream benchmark for evaluating model generalization across regions -- offering actionable insights for insurance underwriting, disaster preparedness, and infrastructure policy planning.

The rise of Large Language Models (LLMs) has streamlined frontend interface creation through tools like Vercel's V0, yet surfaced challenges in design quality (e.g., accessibility, and usability). Current solutions, often limited by their focus, generalisability, or data dependency, fall short in addressing these complexities. Moreover, none of them examine the quality of LLM-generated UI design. In this work, we introduce DesignRepair, a novel dual-stream design guideline-aware system to examine and repair the UI design quality issues from both code aspect and rendered page aspect. We utilised the mature and popular Material Design as our knowledge base to guide this process. Specifically, we first constructed a comprehensive knowledge base encoding Google's Material Design principles into low-level component knowledge base and high-level system design knowledge base. After that, DesignRepair employs a LLM for the extraction of key components and utilizes the Playwright tool for precise page analysis, aligning these with the established knowledge bases. Finally, we integrate Retrieval-Augmented Generation with state-of-the-art LLMs like GPT-4 to holistically refine and repair frontend code through a strategic divide and conquer approach. Our extensive evaluations validated the efficacy and utility of our approach, demonstrating significant enhancements in adherence to design guidelines, accessibility, and user experience metrics.

Creating high-fidelity 3D models of indoor environments is essential for applications in design, virtual reality, and robotics. However, manual 3D modeling remains time-consuming and labor-intensive. While recent advances in generative AI have enabled automated scene synthesis, existing methods often face challenges in balancing visual quality, diversity, semantic consistency, and user control. A major bottleneck is the lack of a large-scale, high-quality dataset tailored to this task. To address this gap, we introduce a comprehensive synthetic dataset, featuring 12,328 structured annotated scenes with 57,440 rooms, and 4.7M photorealistic 2D renderings. Leveraging this dataset, we present SpatialGen, a novel multi-view multi-modal diffusion model that generates realistic and semantically consistent 3D indoor scenes. Given a 3D layout and a reference image (derived from a text prompt), our model synthesizes appearance (color image), geometry (scene coordinate map), and semantic (semantic segmentation map) from arbitrary viewpoints, while preserving spatial consistency across modalities. SpatialGen consistently generates superior results to previous methods in our experiments. We are open-sourcing our data and models to empower the community and advance the field of indoor scene understanding and generation.

Model-Based Reinforcement Learning (MBRL) has been widely studied for Heating, Ventilation, and Air Conditioning (HVAC) control in buildings. One of the critical challenges is the large amount of data required to effectively train neural networks for modeling building dynamics. This paper presents CLUE, an MBRL system for HVAC control in buildings. CLUE optimizes HVAC operations by integrating a Gaussian Process (GP) model to model building dynamics with uncertainty awareness. CLUE utilizes GP to predict state transitions as Gaussian distributions, effectively capturing prediction uncertainty and enhancing decision-making under sparse data conditions. Our approach employs a meta-kernel learning technique to efficiently set GP kernel hyperparameters using domain knowledge from diverse buildings. This drastically reduces the data requirements typically associated with GP models in HVAC applications. Additionally, CLUE incorporates these uncertainty estimates into a Model Predictive Path Integral (MPPI) algorithm, enabling the selection of safe, energy-efficient control actions. This uncertainty-aware control strategy evaluates and selects action trajectories based on their predicted impact on energy consumption and human comfort, optimizing operations even under uncertain conditions. Extensive simulations in a five-zone office building demonstrate that CLUE reduces the required training data from hundreds of days to just seven while maintaining robust control performance. It reduces comfort violations by an average of 12.07% compared to existing MBRL methods, without compromising on energy efficiency.

Synthesizing realistic 3D indoor scenes remains challenging due to data scarcity and the difficulty of simultaneously enforcing global architectural constraints and local semantic consistency. Existing approaches often overlook structural boundaries or rely on fully connected relation graphs that introduce redundant generation errors. Inspired by human design cognition, we present CasLayout, a cascaded diffusion framework that decomposes the joint scene generation task into four conditional sub-stages with explicit physical and semantic roles: (1) predicting furniture quantity and categories, (2) refining object sizes and feature embeddings, (3) modeling spatial relationships in a latent space, and (4) generating Oriented Bounding Boxes (OBBs). This decoupled architecture reduces data requirements and enables flexible integration of Large Language Models (LLMs) and Vision Language Models (VLMs) for zero-shot tasks such as image-to-scene generation. To maintain physical validity within complex floor plans, we explicitly model building elements (e.g., walls, doors, and windows) as conditional constraints. Furthermore, to address the high entropy of dense relation graphs, we introduce a sparse relation graph formulation aligned with human spatial descriptions. By encoding these sparse graphs into a compact latent space using a bidirectional Variational Autoencoder (VAE), the proposed framework provides enhanced relational controllability, allowing generated layouts to better respect functional organization. Experiments demonstrate that CasLayout achieves state-of-the-art performance in fidelity and diversity while enabling improved controllability in practical applications.

Computer-Aided Design (CAD) powers modern engineering, yet producing high-quality parts still demands substantial expert effort. Many AI systems tackle CAD reverse engineering, but most are single-pass and miss fine geometric details. In contrast, human engineers compare the input shape with the reconstruction and iteratively modify the design based on remaining discrepancies. Agent-based methods mimic this loop with frozen VLMs, but weak 3D grounding of current foundation models limits reliability and efficiency. We introduce CADReasoner, a model trained to iteratively refine its prediction using geometric discrepancy between the input and the predicted shape. The model outputs a runnable CadQuery Python program whose rendered mesh is fed back at the next step. CADReasoner fuses multi-view renders and point clouds as complementary modalities. To bridge the realism gap, we propose a scan-simulation protocol applied during both training and evaluation. Across DeepCAD, Fusion 360, and MCB benchmarks, CADReasoner attains state-of-the-art results on clean and scan-sim tracks.

In this study, we aim to initiate the development of Radiology Foundation Model, termed as RadFM.We consider the construction of foundational models from the perspectives of data, model design, and evaluation thoroughly. Our contribution can be concluded as follows: (i), we construct a large-scale Medical Multi-modal Dataset, MedMD, consisting of 16M 2D and 3D medical scans. To the best of our knowledge, this is the first multi-modal dataset containing 3D medical scans. (ii), We propose an architecture that enables visually conditioned generative pre-training, allowing for the integration of text input interleaved with 2D or 3D medical scans to generate response for diverse radiologic tasks. The model was initially pre-trained on MedMD and subsequently domain-specific fine-tuned on RadMD, a radiologic cleaned version of MedMD, containing 3M radiologic visual-language pairs. (iii), we propose a new evaluation benchmark that comprises five tasks, aiming to comprehensively assess the capability of foundation models in handling practical clinical problems. Our experimental results confirm that RadFM significantly outperforms existing multi-modal foundation models. The codes, data, and model checkpoint will all be made publicly available to promote further research and development in the field.

Interior design allows us to be who we are and live how we want - each design is as unique as our distinct personality. However, it is not trivial for non-professionals to express and materialize this since it requires aligning functional and visual expectations with the constraints of physical space; this renders interior design a luxury. To make it more accessible, we present I-Design, a personalized interior designer that allows users to generate and visualize their design goals through natural language communication. I-Design starts with a team of large language model agents that engage in dialogues and logical reasoning with one another, transforming textual user input into feasible scene graph designs with relative object relationships. Subsequently, an effective placement algorithm determines optimal locations for each object within the scene. The final design is then constructed in 3D by retrieving and integrating assets from an existing object database. Additionally, we propose a new evaluation protocol that utilizes a vision-language model and complements the design pipeline. Extensive quantitative and qualitative experiments show that I-Design outperforms existing methods in delivering high-quality 3D design solutions and aligning with abstract concepts that match user input, showcasing its advantages across detailed 3D arrangement and conceptual fidelity.

This paper aims to design a unified Computer-Aided Design (CAD) generation system that can easily generate CAD models based on the user's inputs in the form of textual description, images, point clouds, or even a combination of them. Towards this goal, we introduce the CAD-MLLM, the first system capable of generating parametric CAD models conditioned on the multimodal input. Specifically, within the CAD-MLLM framework, we leverage the command sequences of CAD models and then employ advanced large language models (LLMs) to align the feature space across these diverse multi-modalities data and CAD models' vectorized representations. To facilitate the model training, we design a comprehensive data construction and annotation pipeline that equips each CAD model with corresponding multimodal data. Our resulting dataset, named Omni-CAD, is the first multimodal CAD dataset that contains textual description, multi-view images, points, and command sequence for each CAD model. It contains approximately 450K instances and their CAD construction sequences. To thoroughly evaluate the quality of our generated CAD models, we go beyond current evaluation metrics that focus on reconstruction quality by introducing additional metrics that assess topology quality and surface enclosure extent. Extensive experimental results demonstrate that CAD-MLLM significantly outperforms existing conditional generative methods and remains highly robust to noises and missing points. The project page and more visualizations can be found at: https://cad-mllm.github.io/

Boundary Representation (BRep) is the standard format for Computer-Aided Design (CAD), yet reconstructing high-quality BReps from single-view images remains challenging due to the complexity of topological constraints and operation sequences. We present Img2CADSeq, a multi-stage pipeline that overcomes these limitations by encoding CAD sequences into a three-level hierarchical codebook. Guided by an importance prioritization, this strategy values profiles over details, compressing long sequences into a stable discrete latent space. To bridge the modality gap, we leverage a coarse-to-fine point cloud intermediate, aligning 2D visual features with 3D CAD sequences via contrastive learning to condition a VQ-Diffusion model. Supported by newly introduced CAD-220K and PrintCAD datasets, our approach ensures robust industrial domain adaptation. Extensive experiments demonstrate that Img2CADSeq significantly outperforms state-of-the-art methods, producing standard STEP files that can be directly used in commercial CAD software.

Machine learning is a prevalent approach to tame the complexity of design space exploration for domain-specific architectures. Using ML for design space exploration poses challenges. First, it's not straightforward to identify the suitable algorithm from an increasing pool of ML methods. Second, assessing the trade-offs between performance and sample efficiency across these methods is inconclusive. Finally, lack of a holistic framework for fair, reproducible, and objective comparison across these methods hinders progress of adopting ML-aided architecture design space exploration and impedes creating repeatable artifacts. To mitigate these challenges, we introduce ArchGym, an open-source gym and easy-to-extend framework that connects diverse search algorithms to architecture simulators. To demonstrate utility, we evaluate ArchGym across multiple vanilla and domain-specific search algorithms in designing custom memory controller, deep neural network accelerators, and custom SoC for AR/VR workloads, encompassing over 21K experiments. Results suggest that with unlimited samples, ML algorithms are equally favorable to meet user-defined target specification if hyperparameters are tuned; no solution is necessarily better than another (e.g., reinforcement learning vs. Bayesian methods). We coin the term hyperparameter lottery to describe the chance for a search algorithm to find an optimal design provided meticulously selected hyperparameters. The ease of data collection and aggregation in ArchGym facilitates research in ML-aided architecture design space exploration. As a case study, we show this advantage by developing a proxy cost model with an RMSE of 0.61% that offers a 2,000-fold reduction in simulation time. Code and data for ArchGym is available at https://bit.ly/ArchGym.

Large Language Models (LLMs) can generate Computer-Aided Design (CAD), yet lack physical comprehension required for reliable engineering design. Instead of attempting to implicitly learn physical laws from data, we propose a Hybrid Agentic-Physical Architecture that embeds validated knowledge-based engineering tools directly into the decision making loop of autonomous AI agents. In this framework, engineering design is formulated as a closed-loop, sequential decision making process guided by explicit physical verification. Based on a load case, dedicated agents iteratively plan, generate, evaluate, and revise engineering designs using knowledge-based tools as a feedback signal. We introduce a benchmark dataset and metrics for assessing functional validity in generative CAD. Our system generates more complex and physically verified designs, with a 4.2 increase in structural complexity and improving compile rate by 3.5% compared to similar agentic methods. The codebase, prompts and dataset will be made publicly available to support reproducibility and future research.

Despite many advances in knowledge engineering (KE), challenges remain in areas such as engineering knowledge graphs (KGs) at scale, keeping up with evolving domain knowledge, multilingualism, and multimodality. Recently, KE has used LLMs to support semi-automatic tasks, but the most effective use of LLMs to support knowledge engineers across the KE activites is still in its infancy. To explore the vision of LLM copilots for KE and change existing KE practices, we conducted a multimethod study during a KE hackathon. We investigated participants' views on the use of LLMs, the challenges they face, the skills they may need to integrate LLMs into their practices, and how they use LLMs responsibly. We found participants felt LLMs could contribute to improving efficiency when engineering KGs, but presented increased challenges around the already complex issues of evaluating the KE tasks. We discovered prompting to be a useful but undervalued skill for knowledge engineers working with LLMs, and note that natural language processing skills may become more relevant across more roles in KG construction. Integrating LLMs into KE tasks needs to be mindful of potential risks and harms related to responsible AI. Given the limited ethical training, most knowledge engineers receive solutions such as our suggested `KG cards' based on data cards could be a useful guide for KG construction. Our findings can support designers of KE AI copilots, KE researchers, and practitioners using advanced AI to develop trustworthy applications, propose new methodologies for KE and operate new technologies responsibly.

Machine learning (ML) is increasingly used in structural engineering and design, yet its broader adoption is hampered by the lack of openly accessible datasets of structural systems. We introduce BridgeNet, a publicly available graph-based dataset of 20,000 form-found bridge structures aimed at enabling Graph ML and multi-modal learning in the context of conceptual structural design. Each datapoint consists of (i) a pin-jointed equilibrium wireframe model generated with the Combinatorial Equilibrium Modeling (CEM) form-finding method, (ii) a volumetric 3D mesh obtained through force-informed materialization, and (iii) rendered images from two canonical camera angles. The resulting dataset is modality-rich and application-agnostic, supporting tasks such as CEM-specific edge classification and parameter inference, surrogate modeling of form-finding, cross-modal reconstruction between graphs, meshes and images, and generative structural design. BridgeNet addresses a key bottleneck in data-driven applications for structural engineering and design by providing a dataset that facilitates the development of new ML-based approaches for equilibrium bridge structures.

Leveraging multimodal data to drive breakthroughs in e-commerce applications through Multimodal Foundation Models (MFMs) is gaining increasing attention from the research community. However, there are significant challenges that hinder the optimal use of multimodal e-commerce data by foundation models: (1) the scarcity of large-scale, high-quality multimodal benchmark datasets; and (2) the lack of effective multimodal information integration methods. To address these challenges, in this paper, we introduce MMECInstruct, the first-ever, large-scale, and high-quality multimodal instruction dataset for e-commerce. We also develop CASLIE, a simple, lightweight, yet effective framework for integrating multimodal information for e-commerce. Leveraging MMECInstruct, we fine-tune a series of e-commerce MFMs within CASLIE, denoted as CASLIE models. Our comprehensive evaluation demonstrates that CASLIE models substantially outperform 5 categories of advanced baseline models in the in-domain evaluation. Moreover, CASLIE models show strong generalizability to out-of-domain settings. MMECInstruct and CASLIE models are publicly accessible through https://ninglab.github.io/CASLIE/.

Efficient creation of accurate and editable 3D CAD models is critical in engineering design, significantly impacting cost and time-to-market in product innovation. Current manual workflows remain highly time-consuming and demand extensive user expertise. While recent developments in AI-driven CAD generation show promise, existing models are limited by incomplete representations of CAD operations, inability to generalize to real-world images, and low output accuracy. This paper introduces CAD-Coder, an open-source Vision-Language Model (VLM) explicitly fine-tuned to generate editable CAD code (CadQuery Python) directly from visual input. Leveraging a novel dataset that we created--GenCAD-Code, consisting of over 163k CAD-model image and code pairs--CAD-Coder outperforms state-of-the-art VLM baselines such as GPT-4.5 and Qwen2.5-VL-72B, achieving a 100% valid syntax rate and the highest accuracy in 3D solid similarity. Notably, our VLM demonstrates some signs of generalizability, successfully generating CAD code from real-world images and executing CAD operations unseen during fine-tuning. The performance and adaptability of CAD-Coder highlights the potential of VLMs fine-tuned on code to streamline CAD workflows for engineers and designers. CAD-Coder is publicly available at: https://github.com/anniedoris/CAD-Coder.

The machine learning community has recently had increased interest in the climate and disaster damage domain due to a marked increased occurrences of natural hazards (e.g., hurricanes, forest fires, floods, earthquakes). However, not enough attention has been devoted to mitigating probable destruction from impending natural hazards. We explore this crucial space by predicting building-level damages on a before-the-fact basis that would allow state actors and non-governmental organizations to be best equipped with resource distribution to minimize or preempt losses. We introduce PreDisM that employs an ensemble of ResNets and fully connected layers over decision trees to capture image-level and meta-level information to accurately estimate weakness of man-made structures to disaster-occurrences. Our model performs well and is responsive to tuning across types of disasters and highlights the space of preemptive hazard damage modelling.

We introduce Olmo 3, a family of state-of-the-art, fully-open language models at the 7B and 32B parameter scales. Olmo 3 model construction targets long-context reasoning, function calling, coding, instruction following, general chat, and knowledge recall. This release includes the entire model flow, i.e., the full lifecycle of the family of models, including every stage, checkpoint, data point, and dependency used to build it. Our flagship model, Olmo 3 Think 32B, is the strongest fully-open thinking model released to-date.

The world is covered with millions of buildings, and precisely knowing each instance's position and extents is vital to a multitude of applications. Recently, automated building footprint segmentation models have shown superior detection accuracy thanks to the usage of Convolutional Neural Networks (CNN). However, even the latest evolutions struggle to precisely delineating borders, which often leads to geometric distortions and inadvertent fusion of adjacent building instances. We propose to overcome this issue by exploiting the distinct geometric properties of buildings. To this end, we present Deep Structured Active Contours (DSAC), a novel framework that integrates priors and constraints into the segmentation process, such as continuous boundaries, smooth edges, and sharp corners. To do so, DSAC employs Active Contour Models (ACM), a family of constraint- and prior-based polygonal models. We learn ACM parameterizations per instance using a CNN, and show how to incorporate all components in a structured output model, making DSAC trainable end-to-end. We evaluate DSAC on three challenging building instance segmentation datasets, where it compares favorably against state-of-the-art. Code will be made available.

Constructing computer-aided design (CAD) models is labor-intensive but essential for engineering and manufacturing. Recent advances in Large Language Models (LLMs) have inspired the LLM-based CAD generation by representing CAD as command sequences. But these methods struggle in practical scenarios because command sequence representation does not support entity selection (e.g. faces or edges), limiting its ability to support complex editing operations such as chamfer or fillet. Further, the discretization of a continuous variable during sketch and extrude operations may result in topological errors. To address these limitations, we present Pointer-CAD, a novel LLM-based CAD generation framework that leverages a pointer-based command sequence representation to explicitly incorporate the geometric information of B-rep models into sequential modeling. In particular, Pointer-CAD decomposes CAD model generation into steps, conditioning the generation of each subsequent step on both the textual description and the B-rep generated from previous steps. Whenever an operation requires the selection of a specific geometric entity, the LLM predicts a Pointer that selects the most feature-consistent candidate from the available set. Such a selection operation also reduces the quantization error in the command sequence-based representation. To support the training of Pointer-CAD, we develop a data annotation pipeline that produces expert-level natural language descriptions and apply it to build a dataset of approximately 575K CAD models. Extensive experimental results demonstrate that Pointer-CAD effectively supports the generation of complex geometric structures and reduces segmentation error to an extremely low level, achieving a significant improvement over prior command sequence methods, thereby significantly mitigating the topological inaccuracies introduced by quantization error.

We present SkexGen, a novel autoregressive generative model for computer-aided design (CAD) construction sequences containing sketch-and-extrude modeling operations. Our model utilizes distinct Transformer architectures to encode topological, geometric, and extrusion variations of construction sequences into disentangled codebooks. Autoregressive Transformer decoders generate CAD construction sequences sharing certain properties specified by the codebook vectors. Extensive experiments demonstrate that our disentangled codebook representation generates diverse and high-quality CAD models, enhances user control, and enables efficient exploration of the design space. The code is available at https://samxuxiang.github.io/skexgen.

Medical image analysis is a fundamental component. As deep learning progresses, the focus has shifted from single-task applications, such as classification and segmentation, to more complex multimodal tasks, including medical visual question answering and report generation. Traditional shallow and task-specific models are increasingly limited in addressing the complexity and scalability required in clinical practice. The emergence of large language models (LLMs) has driven the development of medical Large Vision-Language Models (LVLMs), offering a unified solution for diverse vision-language tasks. In this study, we investigate various architectural designs for medical LVLMs based on the widely adopted LLaVA framework, which follows an encoder-connector-LLM paradigm. We construct two distinct models targeting 2D and 3D modalities, respectively. These models are designed to support both general-purpose medical tasks and domain-specific fine-tuning, thereby serving as effective foundation models. To facilitate reproducibility and further research, we develop a modular and extensible codebase, MedM-VL, and release two LVLM variants: MedM-VL-2D for 2D medical image analysis and MedM-VL-CT-Chest for 3D CT-based applications. The code and models are available at: https://github.com/MSIIP/MedM-VL

Artefact descriptions are the primary carriers of engineering design knowledge that is both an outcome and a driver of the design process. While an artefact could be described in different connotations, the design process requires a description to embody engineering design knowledge, which is expressed in the text through intricate placement of entities and relationships. As large-language models learn from all kinds of text merely as a sequence of characters/tokens, these are yet to generate text that embodies explicit engineering design facts. Existing ontological design theories are less likely to guide the large-language models whose applications are currently limited to ideation and learning purposes. In this article, we explicate engineering design knowledge as knowledge graphs from a large sample of 33,881 patent documents. We examine the constituents of these knowledge graphs to understand the linguistic and structural basis of engineering design knowledge. In terms of linguistic basis, we observe that entities and relationships could be generalised to 64 and 24 linguistic syntaxes. While relationships mainly capture attributes ('of'), structure ('in', 'with'), purpose ('to', 'for'), hierarchy ('include'), exemplification ('such as'), and behaviour ('to', 'from'), the hierarchical relationships could specifically be identified using 75 unique syntaxes. To understand the structural basis, we draw inspiration from various studies on biological/ecological networks and discover motifs from patent knowledge graphs. We identify four 3-node and four 4-node patterns that could further be converged and simplified into sequence [->...->], aggregation [->...<-], and hierarchy [<-...->]. Expected to guide large-language model based design tools, we propose few regulatory precepts for concretising abstract entities and relationships within subgraphs, while explicating hierarchical structures.

In social sciences, researchers often face challenges when conducting large-scale experiments, particularly due to the simulations' complexity and the lack of technical expertise required to develop such frameworks. Agent-Based Modeling (ABM) is a computational approach that simulates agents' actions and interactions to evaluate how their behaviors influence the outcomes. However, the traditional implementation of ABM can be demanding and complex. Generative Agent-Based Modeling (GABM) offers a solution by enabling scholars to create simulations where AI-driven agents can generate complex behaviors based on underlying rules and interactions. This paper introduces a framework for designing reliable experiments using GABM, making sophisticated simulation techniques more accessible to researchers across various fields. We provide a step-by-step guide for selecting appropriate tools, designing the model, establishing experimentation protocols, and validating results.

Computer-Aided Design (CAD) delivers rapid, editable modeling for engineering and manufacturing. Recent AI progress now makes full automation feasible for various CAD tasks. However, progress is bottlenecked by data: public corpora mostly contain sketch-extrude sequences, lack complex operations, multi-operation composition and design intent, and thus hinder effective fine-tuning. Attempts to bypass this with frozen VLMs often yield simple or invalid programs due to limited 3D grounding in current foundation models. We present CADEvolve, an evolution-based pipeline and dataset that starts from simple primitives and, via VLM-guided edits and validations, incrementally grows CAD programs toward industrial-grade complexity. The result is 8k complex parts expressed as executable CadQuery parametric generators. After multi-stage post-processing and augmentation, we obtain a unified dataset of 1.3m scripts paired with rendered geometry and exercising the full CadQuery operation set. A VLM fine-tuned on CADEvolve achieves state-of-the-art results on the Image2CAD task across the DeepCAD, Fusion 360, and MCB benchmarks.

Business intelligence (BI) transforms large volumes of data within modern organizations into actionable insights for informed decision-making. Recently, large language model (LLM)-based agents have streamlined the BI workflow by automatically performing task planning, reasoning, and actions in executable environments based on natural language (NL) queries. However, existing approaches primarily focus on individual BI tasks such as NL2SQL and NL2VIS. The fragmentation of tasks across different data roles and tools lead to inefficiencies and potential errors due to the iterative and collaborative nature of BI. In this paper, we introduce DataLab, a unified BI platform that integrates a one-stop LLM-based agent framework with an augmented computational notebook interface. DataLab supports a wide range of BI tasks for different data roles by seamlessly combining LLM assistance with user customization within a single environment. To achieve this unification, we design a domain knowledge incorporation module tailored for enterprise-specific BI tasks, an inter-agent communication mechanism to facilitate information sharing across the BI workflow, and a cell-based context management strategy to enhance context utilization efficiency in BI notebooks. Extensive experiments demonstrate that DataLab achieves state-of-the-art performance on various BI tasks across popular research benchmarks. Moreover, DataLab maintains high effectiveness and efficiency on real-world datasets from Tencent, achieving up to a 58.58% increase in accuracy and a 61.65% reduction in token cost on enterprise-specific BI tasks.

Decision-relevant building damage assessment is critical for prioritizing resources and recovery after a disaster, yet most automated methods either flatten damage into a single severity scale (no damage, minor, major, destroyed) or require paired pre- and post-event imagery that is often unavailable for emerging hazards. This paper presents Damage-TriageFormer, a single-image, post-event, footprint-conditioned model that produces a damage typology rather than a severity scale. We contribute: (1) DamageTriage-Bench, a new benchmark built from NOAA Emergency Response Imagery across Hurricane Michael (2018), Hurricane Helene (2024), and the 2025 Los Angeles wildfire complex, with five typology classes that distinguish roof damage from structural damage and, within each, partial from total extent; and (2) Damage-TriageFormer, which extends a DINOv3 ViT-L backbone with a Simple Feature Pyramid for higher-resolution instance pooling, a two-stage gated damage head, and an auxiliary severity-regression objective. Our model achieves macro F1 of 0.624 on validation and 0.619 on a held-out stratified test set, performing strongest where operational triage needs it most, with per-class F1 of 0.91 and 0.84 on undamaged buildings and total structural collapse, respectively. While the rare Total Roof Damage class remains difficult due to its limited examples and an inherently ambiguous label boundary, our results show that single-image post-event imagery can support actionable building damage typing, enabling targeted emergency response and resource allocation without a pre-event reference.

Automated progress monitoring on construction sites is an active area of research and development. Robot and human-carried mapping systems have been developed to build 3D maps of building and infrastructure projects. While LiDAR-based mapping systems achieve high accuracy, the cost of LiDAR can be prohibitive. Consumer-grade cameras with wide field of view ("360 cameras") combined with embedded inertial measurement units (IMUs) provide a cost-effective alternative. To support change detection and progress monitoring, highly accurate visual Simultaneous Localization and Mapping (SLAM) and floor plan-referenced localization systems are required. In this paper we present a high-quality dataset collected at an active construction site, which captures realistic challenges such as variable lighting conditions, moving workers, fast motions, and repetitive structures. The dataset offers thirty visual-inertial sequences recorded across seven floors over an eight-month period of the construction project. Ground truth trajectories were collected using a high quality LiDAR-inertial SLAM system rigidly attached to the 360 camera. Additionally, we report the results of an open research challenge evaluating the best visual SLAM and localization systems from around the world. The Challenge attracted substantially higher participation in SLAM, with 62 teams compared to 22 in floor-plan-referenced localization, reflecting the broader maturity of SLAM methods. The higher errors in localization further highlight the difficulty of this task in construction and point to the need for continued research, which this dataset is intended to support. The dataset and the benchmark are publicly available at: https://hilti-trimble-challenge.com/dataset-2026.